UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

(Mark One)

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended June 30, 2023

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ________ to ________

Commission File Number 1-16027

LANTRONIX, INC.

(Exact name of registrant as specified in its charter)

Delaware	33-0362767
(State or other jurisdiction of incorporation or organization)	(I.R.S. Employer Identification No.)

48 Discovery, Suite 250 Irvine, California	92618
(Address of principal executive offices)	(Zip Code)

(949) 453-3990

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Title of each class	Trading Symbol(s)	Name of each exchange on which registered
Common Stock, $0.0001 par value	LTRX	The Nasdaq Stock Market LLC

Securities registered pursuant to Section 12(g) of the Act: None.

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company”, and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer ☐	Accelerated filer ☒	Non-accelerated filer ☐	Smaller reporting company ☒
			Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐ No

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to § 240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

The aggregate market value of the registrant’s common stock held by non-affiliates based upon the closing sales price of the common stock as reported by the Nasdaq Capital Market on December 31, 2022, the last trading day of the registrant’s second fiscal quarter, was approximately $116,199,000. The determination of affiliate status for this purpose shall not be a conclusive determination for any other purpose.

As of August 31, 2023, there were 36,911,911 shares of the registrant’s common stock outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant's definitive Proxy Statement on Schedule 14A relating to the registrant's 2023 annual meeting of stockholders, which will be filed with the Securities and Exchange Commission within 120 days after the end of the fiscal year covered by this Annual Report on Form 10-K, are incorporated by reference into Part III of this Annual Report on Form 10-K.

LANTRONIX, INC.

ANNUAL REPORT ON FORM 10-K

For the Fiscal Year Ended June 30, 2023

TABLE OF CONTENTS

		Page

	Cautionary Note Regarding Forward-Looking Statements	ii

PART I

Item 1.	Business	1

Item 1A.	Risk Factors	6

Item 1B.	Unresolved Staff Comments	21

Item 2.	Properties	22

Item 3.	Legal Proceedings	22

Item 4.	Mine Safety Disclosures	22

PART II

Item 5.	Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities	23

Item 6.	Reserved	23

Item 7.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	23

Item 7A.	Quantitative and Qualitative Disclosures About Market Risk *	35

Item 8.	Financial Statements and Supplementary Data	35

Item 9.	Changes in and Disagreements with Accountants on Accounting and Financial Disclosure	35

Item 9A.	Controls and Procedures	36

Item 9B.	Other Information	37

Item 9C.	Disclosure Regarding Foreign Jurisdictions that Prevent Inspections	37

PART III

Item 10.	Directors, Executive Officers and Corporate Governance	38

Item 11.	Executive Compensation	38

Item 12.	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters	38

Item 13.	Certain Relationships and Related Transactions and Director Independence	38

Item 14.	Principal Accountant Fees and Services	38

PART IV

Item 15.	Exhibits and Financial Statement Schedules	39

Item 16.	Form 10-K Summary	42

* Not required for a “smaller reporting company.”

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K for the fiscal year ended June 30, 2023, or this Report, contains forward-looking statements within the meaning of the federal securities laws, which statements are subject to substantial risks and uncertainties. These forward-looking statements are intended to qualify for the safe harbor from liability established by the Private Securities Litigation Reform Act of 1995. All statements other than statements of historical fact included in this Report, or incorporated by reference into this Report, are forward-looking statements. Throughout this Report, we have attempted to identify forward-looking statements by using words such as “may,” “believe,” “will,” “could,” “project,” “anticipate,” “expect,” “estimate,” “should,” “continue,” “potential,” “plan,” “forecasts,” “goal,” “seek,” “intend,” other forms of these words or similar words or expressions or the negative thereof. Additionally, statements concerning future matters such as our expected earnings, revenues, expenses and financial condition, our expectations with respect to the development of new products, expectations regarding the impact of the COVID-19 pandemic or similar outbreaks, and other statements regarding matters that are not historical are forward-looking statements.

We have based our forward-looking statements on management’s current expectations and projections about trends affecting our business and industry and other future events. Although we do not make forward-looking statements unless we believe we have a reasonable basis for doing so, we cannot guarantee their accuracy. Forward-looking statements are subject to substantial risks and uncertainties that could cause our future business, financial condition, results of operations or performance to differ materially from our historical results or those expressed or implied in any forward-looking statement contained in this Report. Factors which could have a material adverse effect on our operations and future prospects or which could cause actual results to differ materially from our expectations include, but are not limited to, those set forth under “Risk Factors” in Item 1A of Part I of this Report, as such factors may be updated, amended or superseded from time to time by subsequent quarterly reports on Form 10-Q or current reports on Form 8-K. In addition, actual results may differ as a result of additional risks and uncertainties of which we are currently unaware or which we do not currently view as material to our business.

You should read this Report in its entirety, together with the documents that we file as exhibits to this Report, with the understanding that our future results may be materially different from what we currently expect. The forward-looking statements we make speak only as of the date on which they are made. We expressly disclaim any intent or obligation to update any forward-looking statements after the date hereof to conform such statements to actual results or to changes in our opinions or expectations, except as required by applicable law or the rules of The Nasdaq Capital Market. If we do update or correct any forward-looking statements, investors should not conclude that we will make additional updates or corrections.

We qualify all of our forward-looking statements by these cautionary statements.

PART I

ITEM 1.

BUSINESS

Overview

Lantronix, Inc. is a global Industrial and Enterprise internet of things (“IoT”) provider of solutions that target high growth applications in specific verticals such as Smart Grid, Intelligent Transportation, Smart Cities, and AI Data Centers. Building on a long history of Networking and video processing competence, target applications include Intelligent Substations infrastructure, Infotainment systems, and Video Surveillance, supplemented with a comprehensive Out of Band Management (“OOB”) products offering for Cloud and Edge Computing.

We organize our portfolio of services into the following product lines: Embedded IoT Modules, IoT Systems Solutions, and Software and Services.

We were incorporated in California in 1989 and reincorporated in Delaware in 2000.

References in this Report to “fiscal 2023” refer to the fiscal year ended June 30, 2023 and references to “fiscal 2022” refer to the fiscal year ended June 30, 2022. In addition, unless the context suggests otherwise, all reference in this Report to the “Company,” “we,” and “us,” refer to Lantronix, Inc. together with its subsidiaries.

Our Strategy

Today, more businesses are seeking to streamline their operations by connecting their Operational Technology (“OT”) Infrastructure equipment to the Internet, manage it remotely, and reduce costs. The growth in the IoT and OOB markets is being driven by the growing importance of data analytics, and the rapidly falling cost of sensors, connectivity, compute, and storage. Designing and deploying these projects is complex, costly and time-consuming. Our products are designed to help companies increase speed and reduce the complexity of their deployments by offering our customers customizable solutions, that address each layer of the IoT Stack, such as Collect, Connect, Compute, Control and Comprehend.

We are executing on a growth strategy that includes continuous innovation supplemented by strategic acquisitions with the intent of increasing our scale and broadening our scope so that we can increase our value proposition to customers. We believe this strategy will allow us to address a larger portion of our customers’ operational needs and engage with them as a strategic partner. This strategy is starting to bear fruits as we continue to strengthen our position in the market and more customers come to us for a wider variety of applications.

Products and Solutions

Embedded IoT Modules

This portfolio of embedded products provides a variety of options including Compute System-on-Module (“SOM”) or System-in-Package (“SIP”) solutions supplemented with wired and wireless network Connectivity products. As the level of silicon integration continues to grow, the compute modules also provide the ability to Collect digital information (Video, Audio or Sensors) and analyze/comprehend the data streams based on specific AI/ML algorithms. The new implementations of SIP devices can process multiple media streams with CV (Computer Vision) technology and the modules can be Controlled remotely via ConsoleFlow™, Lantronix’s Cloud SaaS platform. Our IoT compute products typically are embedded into a customer new product design, enabling advanced application functionality at the edge. These products include application processing that delivers compute to meet customer needs for data transformation, computer vision, machine learning, augmented / virtual reality, audio / video aggregation and distribution, and custom applications at the edge. Many of the products are offered with software tools intended to further accelerate our customers’ time-to-market and increase their value add. Most of our IoT embedded products are pre-certified in a number of countries thereby significantly reducing our original equipment manufacturer (“OEM”) customers’ regulatory certification costs and accelerating their time-to-market.

The following product families are included in our Embedded IoT Solutions product line: Open-Q SOMs and SIPs, XPort®, XPort® Pro, WiPort®, Development Kits, xPico®, xPico® Wi-Fi, NICS, Optical SFPs, PremierWave® EN, and PremierWave® XC.

IoT System Solutions

The IoT Systems Solutions portfolio consists of fully functional standalone systems that provide routing, switching or gateway functionalities as well as Telematics and media conversion. These products include wired and wireless connections that enhance the value and utility of modern electronic systems and equipment by providing secure network connectivity, power for IoT end devices through Power over Ethernet (“PoE”), application hosting, protocol conversion, media conversion, secure access for distributed IoT deployments and many other functions. Most of our IoT System products are pre-certified in a number of countries thereby significantly reducing our original equipment manufacturer (“OEM”) customers’ regulatory certification costs and accelerating their time-to-market.

Our PoE products support remote devices such as cameras and wireless access points by passing electrical power along with data on Ethernet cabling, eliminating the need for traditional AC/DC electrical power in hard-to-reach locations. As more cities move to implement smart city technology, a major component will be solutions designed to protect and provide services to citizens, such as intelligent transportation and surveillance networks. Our switches deliver the necessary connectivity, bandwidth and power to enable these solutions. Many of our products incorporate features to perform advanced levels of fault management and diagnostics to troubleshoot networks and proactively fix problems. Our media converters and other customer premise equipment (“CPE”) assist customers in resolving challenges in the areas of bandwidth constraints, security risks, and distance limitations as networks extend from local area to wide area networks and adapt to ever increasing end-user demands.

Our smart tracking devices are designed to deliver robust data logging and positional tracking functionality and reliability for supply chain and logistics solutions. Our telematics devices are designed to be flexible in the field and offer a variety of connectivity options to suit the customers’ needs across 3G, 4G, and LTE cellular networks. These power efficient products are designed to support communications across interfaces and industrial protocols for vehicle, fleet, and asset tracking and management. Many of the products are offered with software tools intended to further accelerate our customers’ time-to-market and increase their value add. Most of our IoT Telematics products are pre-certified in a number of countries thereby significantly reducing our OEM customers’ regulatory certification costs and accelerating their time-to-market.

As Edge Computing deployment accelerates, OOB Management allows for full comprehension and control of a remote IT infrastructure, across a range of sensors (e.g., temperature, humidity, light, acceleration, open / close, etc.) providing status and alerting, enabling automation, and remote control of devices, servers, and end stations. OOB is a technique that uses a dedicated management network to access critical infrastructure components and ensure production independent connectivity. Remote Management allows organizations to effectively monitor and control their enterprise IT equipment and facilities (environments), either in or out of band, optimizing their IT support resources.

Our AOOB (“Advanced OOB”) product line includes console management, power management, and IP connected keyboard-video-mouse (commonly referred to as “IPKVM”) products that provide remote access to IT and networking infrastructure deployed in test labs, data centers, branch offices, remote sites, and server rooms.

The following product families are included in IoT System Solutions product line: EDS, EDS-MD, xPress™, xDirect®, E21x, E22x, G52x, X30x, Bolero4x, FOX3-4G, FOX4, SGX™, SLB^™, SLC^™8000, Spider^™, UDS, EMG^™, S40 and PoE Switches. In addition, we offer non-PoE Network Switches and Media Converters.

Software and Engineering Services

Our SaaS platform provides single pane of glass management for REM and IoT deployments. Our platform enables customers to easily deploy, monitor, manage, and automate across their global deployments, all from a single platform login, virtually connected as though directly on each device. Our platform eliminates the need to have 24/7 personnel on site and makes it easy to see and drill into an issue quickly, even in large scale deployments.

OEMs and System Integrators (“SI”) can leverage our platform multitenancy functionality for supporting a wide customer base while ensuring customer separation. Over the Air (“OTA”) updates make it easy to ensure the latest security patches, firmware, and configurations are deployed and functional.

We leverage our engineering expertise and product development best practices to deliver high quality, innovative products, cost-effectively and on time.

Our engineering services flexible business model allows for choosing turnkey product development or team augmentation for accelerating complex areas of product development such as; camera development and tuning, voice control, machine learning, artificial intelligence, computer vision, augmented / virtual reality, mechanical and radio-frequency design, thermal and power optimization, or in any specific area a customer needs assistance.

In addition to our production-ready edge computing solutions, we offer experienced multidisciplinary engineering services across complete aspects of IoT product development, including hardware engineering, software engineering, mechanical engineering, rapid prototyping, and quality assurance. We also offer services for mechanical, hardware, and software engineering for camera, audio, and artificial intelligence / machine learning development.

The following product families are included in our Software & Services product line: Engineering Services, ConsoleFlow™, Control Center and Level Services.

Net Revenue by Product Line

We have one operating and reportable business segment. A summary of our net revenue by product line is found in “Management’s Discussion and Analysis of Financial Condition and Results of Operations” included in Part II, Item 7 of this Report, which is incorporated herein by reference. A discussion of factors potentially affecting our net revenue and other operating results is set forth in “Risk Factors” included in Part I, Item 1A of this Report, which is incorporated herein by reference.

Sales Cycle

Our embedded IoT solutions are typically designed into products by OEMs, original design manufacturers (“ODMs”) and contract manufacturers. OEMs design and sell products under their own brand that are either manufactured by the OEM in-house or by third-party contract manufacturers. ODMs design and manufacture products for third parties, which then sell those products under the third parties’ brands. The design cycles using our embedded solutions typically range from nine to 24 months and can generate revenue for the entire life cycle of an end user’s product.

Our IoT System Solutions are typically sold to end users through value added resellers (“VARs”) systems integrators, distributors, online retailers and, to a lesser extent, OEMs. The design cycles for these products typically range from three to 18 months and are often project-based.

Sales Channels

Distributors

A majority of our sales are made through distributors. Distributors resell our products to a wide variety of resellers and end customers including OEMs, ODMs, value-added resellers (“VARs”), systems integrators, consumers, online retailers, IT resellers, corporate customers and government entities.

Resellers

Our products are sold by industry-specific system integrators and VARs, who often obtain our products from our distributors. Additionally, our products are sold by direct market resellers such as CDW, ProVantage, and Amazon.com.

Direct Sales

To a lesser extent, we sell products directly to larger OEMs and end users. We also maintain an ecommerce site for direct sales.

Sales and Marketing

We sell our products primarily through an internal sales force, which includes regional sales managers, inside sales personnel and field applications engineers in major regions throughout the world. This team manages our relationships with our partners and end users, identifies and develops new sales opportunities and increases penetration at existing accounts. We implement marketing programs, tools and services, including displaying our products at industry-specific events, to generate sales leads and increase demand for our products.

Manufacturing

Our manufacturing operations are primarily conducted through five third-party contract manufacturers. We currently utilize Hana Microelectronics, primarily located in Thailand and China, Honortone, primarily located in China, Ruby Tech and Info-Tek in Taiwan, and Tailyn in China as our contract manufacturers for most of our products. In addition, we use Marvell Technology Inc., to manage the manufacture of our large-scale integration chips in Taiwan. We manufacture certain products with final assembly in the U.S. to meet trade compliance requirements.

Our contract manufacturers source raw materials, components and integrated circuits, in accordance with our specifications and forecasts, and perform printed circuit board assembly, final assembly, functional testing and quality control. Our products are manufactured and tested to our specifications with standard and custom components. Many of these components are available from multiple vendors. However, we have several single-sourced supplier relationships, either because alternative sources are not available or because the relationship is advantageous to us.

Research and Development

Our research and development efforts are focused on the development of hardware and software technology to differentiate our products and enhance our competitive position in the markets we serve. Product research and development is primarily performed in-house and supplemented with outsourced resources.

Competition

Our industry is highly competitive and characterized by rapid technological advances and evolving industry standards. The market can be affected significantly by new product introductions and marketing activities of industry participants. We believe that we compete for customers based on product features, software capabilities, company reputation, brand recognition, technical support, relationships with partners, quality, reliability, product development capabilities, price and availability. A discussion of factors potentially affecting our ability to compete in the markets in which we operate is set forth in “Risk Factors” included in Part I, Item 1A of this Report, which is incorporated herein by reference.

Intellectual Property Rights

We believe that a considerable portion of our value resides in our intellectual property. We have developed proprietary methodologies, tools, processes and software in connection with delivering our products and services. We protect our intellectual property through a combination of patents, copyrights, trademarks, trade secrets, licenses, non-disclosure agreements and contractual provisions. We enter into a non-disclosure and confidentiality agreement with each of our employees, consultants and third parties that have access to our proprietary technology. Pursuant to assignment of inventions agreements, all of our employees and consultants assign to us all intellectual property rights for the relevant inventions created in connection with their employment or contract with us. We currently hold U.S. and international patents covering various aspects of our products, with additional patent applications pending.

U.S. and Foreign Government Regulation

Many of our products are subject to certain mandatory regulatory approvals in the regions in which our products are deployed. In particular, wireless products must be approved by the relevant government authority prior to these products being offered for sale. In addition, certain jurisdictions have regulations requiring products to use environmentally friendly components. Some of our products employ security technology, which is subject to various U.S. export restrictions.

Employees

As of August 18, 2023, we had 370 total employees including 357 full time employees, none of whom is represented by a labor union. We have not experienced any labor problems resulting in a work stoppage and believe we have good relationships with our employees.

Customer and Geographic Concentrations

We conduct our business globally and manage our sales teams by three geographic regions: the Americas; Europe, Middle East, and Africa (“EMEA”); and Asia Pacific Japan (“APJ”). A discussion of sales to our significant customers and related parties, sales within geographic regions as a percentage of net revenue and sales to significant countries as a percentage of net revenue is set forth in Note 11 of Notes to Consolidated Financial Statements included in Part II, Item 8 of this Report, which is incorporated herein by reference. A discussion of factors potentially affecting our customer and geographic concentrations is set forth in “Risk Factors” included in Part I, Item 1A of this Report, which is incorporated herein by reference.

Available Information

Our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, Proxy Statements on Schedule 14A and other reports and information that we file or furnish pursuant to the Securities Exchange Act of 1934, as amended (the “Exchange Act”) are available free of charge on our website at www.lantronix.com as soon as reasonably practicable after filing or furnishing such reports with the SEC. The SEC also maintains a website at www.sec.gov that contains reports, proxy and information statements, and other information regarding issuers that file electronically. The contents of our website are not incorporated by reference into this Report. References to our website address in this Report are inactive textual references only.

Information About Our Executive Officers

Executive officers serve at the discretion of our board of directors. There are no family relationships between any of our directors or executive officers. The following table presents the names, ages, and positions held by our executive officers as of the date of this Report:

Name	Age	Position
Jeremy R. Whitaker	53	Interim Chief Executive Officer and Chief Financial Officer
Eric Bass	56	Vice President of Engineering
Roger Holliday	64	Vice President of Worldwide Sales

JEREMY R. WHITAKER has served as our interim Chief Executive Officer since June 2023 and our Chief Financial Officer since September 2011. Mr. Whitaker returned to Lantronix after serving as Vice President, Corporate Controller at Mindspeed, a supplier of semiconductor solutions for network infrastructure, from January 2011 to September 2011. Mr. Whitaker previously served as our Vice President of Finance and Accounting from September 2010 to January 2011, where he was responsible for managing all worldwide finance and accounting functions. Mr. Whitaker also served as our Senior Director of Finance and Accounting from February 2006 to September 2010 and our Director of Finance and Accounting from August 2005 to February 2006. Prior to August 2005, Mr. Whitaker held vice president and director level finance and accounting positions with two publicly-traded companies and worked in the assurance practice at Ernst & Young LLP for six years.

ERIC BASS has served as our Vice President of Engineering since January 2023. Prior to joining Lantronix, Mr. Bass held the position of Director of Strategic Programs at Intrinsix Corp., a provider of electronics and custom integrated circuit design engineering solutions and services, from January 2019 to January 2023. Previously, Mr. Bass served in multiple roles at Microsemi Corporation, a provider of semiconductor solutions differentiated by power, security, reliability and performance, from November 2011 to August 2018, culminating with his role as Vice President of Research & Development Voice Circuit and Power-over-Ethernet Divisions from August 2017 to August 2018, and at Zarlink Semiconductor, a provider of mixed-signal chip technologies for a broad range of communications and medical applications, from January 2001 until Zarlink was acquired by Microsemi in November 2011.

ROGER HOLLIDAY joined Lantronix in January 2020 and serves as our Vice President of Worldwide Sales. Prior to joining Lantronix, Mr. Holliday served in various positions at Microsemi Corporation since 1999, serving most recently as Executive Vice President and General Manager from 2013 until Microsemi was acquired by Microchip Technology Inc. in May 2018. Prior to his time at Microsemi, Mr. Holliday served in various product marketing, applications and sales management roles at Linfinity Microelectronics, a manufacturer of standard linear and mixed signal integrated circuits, until Linfinity’s acquisition by Microsemi in 1999.

ITEM 1A.

RISK FACTORS

We operate in a rapidly changing environment that involves numerous risks and uncertainties. Before deciding to purchase, hold or sell our common stock, you should carefully consider the risks described in this section, as well as other information contained in this Report and in our other filings with the SEC. This section should be read in conjunction with the consolidated financial statements and accompanying notes thereto included in Item 8 of this Report, and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” included in Item 7 of this Report. If any of these risks or uncertainties actually occurs, our business, financial condition, results of operations or prospects could be materially harmed. In that event, the market price for our common stock could decline and you could lose all or part of your investment. In addition, risks and uncertainties not presently known to us or that we currently deem immaterial may also adversely affect our business.

Risks Related to Our Operations and Industry

We have experienced and may in the future experience constraints in the supply of certain materials and components that could affect our operating results.

Some of our integrated circuits are only available from a single source and in some cases, are no longer being manufactured. From time to time, integrated circuits, and potentially other components used in our products, will be phased out of production by the manufacturer. When this happens, we attempt to purchase sufficient inventory to meet our needs until a substitute component can be incorporated into our products. Nonetheless, we may be unable to purchase sufficient components to meet our demands, or we may incorrectly forecast our demands, and purchase too many or too few components. In addition, our products use components that have been in the past and may in the future be subject to market shortages and substantial price fluctuations, whether due to the COVID-19 pandemic, the war between Ukraine and Russia, recent tensions between China and Taiwan or otherwise. From time to time, we have been unable to meet customer orders because we were unable to purchase necessary components for our products. We do not have long-term supply arrangements with most of our vendors to obtain necessary components, including semiconductor chips, or technology for our products and instead purchase components on a purchase order basis. If we are unable to purchase components from these suppliers, our product shipments could be prevented or delayed, which could result in a loss of sales. If we are unable to meet existing orders or to enter into new orders because of a shortage in components, we will likely lose net revenue, risk losing customers and risk harm to our reputation in the marketplace, which could adversely affect our business, financial condition or results of operations. For instance, we continue to experience long lead times and delays in shipments of semiconductor chips. As a result, we have sought alternate sources of certain components, which have been at a higher cost. Because semiconductor chips continue to be subject to an ongoing significant shortage, our ability to source components that use semiconductor chips has been adversely affected. These supply interruptions have resulted in increased component delivery lead times and increased costs to obtain components with available semiconductor chips. To the extent this semiconductor chip shortage or other shortages continue, the production of our products may be impacted.

Future operating results depend upon our ability to timely obtain components in sufficient quantities and on acceptable terms.

We and our contract manufacturers are responsible for procuring raw materials for our products. Our products incorporate some components and technologies that are only available from single or limited sources of supply. Depending on a limited number of suppliers exposes us to risks, including limited control over pricing, availability, quality and delivery schedules. Moreover, due to our limited sales, we may not be able to convince suppliers to continue to make components available to us unless there is demand for these components from their other customers. If any one or more of our suppliers cease to provide us with sufficient quantities of components in a timely manner or on terms acceptable to us, we would have to seek alternative sources of supply and we may have difficulty identifying additional or replacement suppliers for some of our components.

We outsource substantially all of our manufacturing to contract manufacturers in Asia. If our contract manufacturers are unable or unwilling to manufacture our products at the quality and quantity we request, our business could be harmed.

We use contract manufacturers based in Asia to manufacture substantially all of our products. Generally, we do not have guaranteed supply agreements with our contract manufacturers or suppliers. If any of these subcontractors or suppliers were to cease doing business with us, we might not be able to obtain alternative sources in a timely or cost-effective manner. Our reliance on third-party manufacturers, especially in countries outside of the U.S., exposes us to a number of significant risks, including:

	·	reduced control over delivery schedules, quality assurance, manufacturing yields and production costs;

	·	lack of guaranteed production capacity or product supply;

	·	effects of terrorist attacks or geopolitical conflicts abroad;

	·	reliance on these manufacturers to maintain competitive manufacturing technologies;

	·	unexpected changes in regulatory requirements, taxes, trade laws and tariffs;

	·	reduced protection for intellectual property rights in some countries;

	·	differing labor regulations;

	·	disruptions to the business, financial stability or operations, including due to strikes, labor disputes or other disruptions to the workforce, of these manufacturers;

	·	compliance with a wide variety of complex regulatory requirements;

	·	fluctuations in currency exchange rates;

	·	changes in a country’s or region’s political or economic conditions;

	·	greater difficulty in staffing and managing foreign operations; and

	·	increased financial accounting and reporting burdens and complexities.

Any problems that we may encounter with the delivery, quality or cost of our products from our contract manufacturers or suppliers could cause us to lose net revenue, damage our customer relationships and harm our reputation in the marketplace, each of which could materially and adversely affect our business, financial condition or results of operations.

From time to time, we may transition the manufacturing of certain products from one contract manufacturer to another. When we do this, we may incur substantial expenses, risk material delays or encounter other unexpected issues.

The effect of COVID-19 and other possible pandemics and similar outbreaks could result in material adverse effects on our business, financial position, results of operations and cash flows.

The COVID-19 pandemic or another pandemic or similar outbreak has had, and may continue to have, an adverse impact on the economy generally, our business and the businesses of our suppliers, and our results of operations and financial condition. In addition, the COVID-19 pandemic resulted in industry events, trade shows and business travel being suspended, cancelled and/or significantly curtailed. While most industry events, trade shows and business travel have resumed, if these activities are suspended, cancelled and/or significantly curtailed in the future, whether due to surges of COVID-19 or other possible pandemics and similar outbreaks, our sales may continue to be negatively impacted in the future.

In addition, the impact of the COVID-19 pandemic or other possible pandemics subject us to various risks and uncertainties that could materially adversely affect our business, results of operations and financial condition, including the following:

	·	significant volatility or decreases in the demand for our products or extended sales cycles;

	·	changes in customer behavior and preferences, as customers may experience financial difficulties and/or may delay orders or reduce their spending;

	·	adverse impacts on our ability to distribute or deliver our products or services, as well as temporary disruptions, restrictions or closures of the facilities of our suppliers or customers and their contract manufacturers;

	·	further disruptions in our contract manufacturers’ ability to manufacture our products, as some contract manufacturers and suppliers of materials used in the production of our products are located in areas more severely impacted by COVID-19, which has limited and could further limit our ability to obtain sufficient materials to produce and manufacture our products; and

	·	volatility in the availability of raw materials and components that our contract manufacturers purchase and volatility in raw material and other input costs.

The duration and extent of the COVID-19 pandemic or another pandemic’s effect on our operations and financial condition will depend on future developments, which are highly uncertain and cannot be predicted at this time. The adverse impact of the COVID-19 pandemic or another pandemic or similar outbreak on our business, results of operations and financial condition have been and could continue to be material.

Certain of our products are sold into mature markets, which could limit our ability to continue to generate revenue from these products. Our ability to sustain and grow our business depends on our ability to develop, market, and sell new products.

Certain of our products are sold into mature markets that are characterized by a trend of declining demand. As the overall market for these products decreases due to the adoption of new technologies, we expect that our revenues from these products will continue to decline. As a result, our future prospects will depend on our ability to develop and successfully market new products that address new and growing markets. Our failure to develop new products or failure to achieve widespread customer acceptance of any new products could cause us to lose market share and cause our revenues to decline. There can be no assurance that we will not experience difficulties that could delay or prevent the successful development, introduction, marketing and sale of new products or product enhancements. Factors that could cause delays include regulatory and/or industry approvals, product design cycle and failure to identify products or features that customers demand. In addition, the introduction and sale of new products often involves a significant technical evaluation, and we often face delays because of our customers’ internal procedures for evaluating, approving and deploying new technologies. For these and other reasons, the sales cycle associated with new products is typically lengthy, often lasting six to 24 months and sometimes longer. Therefore, there can be no assurance that our introduction or announcement of new product offerings will achieve any significant or sustainable degree of market acceptance or result in increased revenue in the near term.

Our software offerings are subject to risks that differ from those facing our hardware products.

We continue to dedicate significant engineering resources to our management software platform, applications, and SaaS offerings, including ConsoleFlow™. These product and service offerings are subject to significant additional risks that are not necessarily related to our hardware products. Our ability to succeed with these offerings will depend in large part on our ability to provide customers with software products and services that offer features and functionality that address the specific needs of businesses. We may face challenges and delays in the development of this product line as the marketplace for products and services evolves to meet the needs and desires of customers. We cannot provide assurances that we will be successful in operating and growing this product line.

In light of these risks and uncertainties, we may not be able to establish or maintain market share for our software and SaaS offerings. As we develop new product lines, we must adapt to market conditions that are unfamiliar to us, such as competitors and distribution channels that are different from those we have known in the past. We have and will encounter competition from other solutions providers, many of whom may have more significant resources than us with which to compete. There can be no assurance that we will recover our investments in this product line, that we will receive meaningful revenue from or realize a profit from this new product line.

We may experience significant fluctuation in our revenue because the timing of large orders placed by some of our customers is often project-based.

Our operating results fluctuate because we often receive large orders from customers that coincide with the timing of the customer’s project. Sales of our products and services may be delayed if customers delay approval or commencement of projects due to budgetary constraints, internal acceptance review procedures, timing of budget cycles or timing of competitive evaluation processes. In addition, sometimes our customers make significant one-time hardware purchases for projects which are not repeated. We sell primarily on a purchase order basis rather than pursuant to long-term contracts, and we expect fluctuations in our revenues as a result of one-time project-based purchases to continue in the future. In addition, our sales may be subject to significant fluctuations based on the acceleration, delay or cancellation of customer projects, or our failure to complete one or a series of significant potential sales. Because a significant portion of our operating expenses are fixed, even a single order can have a disproportionate effect on our quarterly revenues and operating results. As a result of the factors discussed above, and due to the complexities of the industry in which we operate, it is difficult for us to forecast demand for our current or future products with any degree of certainty, which means it is difficult for us to forecast our sales. If our quarterly or annual operating results fall below the expectations of investors or securities analysts, the price of our common stock could decline substantially.

The lengthy sales cycle for our products and services, along with delays in customer completion of projects, make the timing of our revenues difficult to predict.

We have a lengthy sales cycle for many of our products that generally extends between six and 24 months and sometimes longer due to a lengthy customer evaluation and approval process. The length of this process can be affected by factors over which we have little or no control, including the customer’s budgetary constraints, timing of the customer’s budget cycles, and concerns by the customer about the introduction of new products by us or by our competitors. As a result, sales cycles for customer orders vary substantially among different customers. The lengthy sales cycle is one of the factors that has caused, and may continue to cause, our revenues and operating results to vary significantly from quarter to quarter. In addition, we may incur substantial expenses and devote significant management effort and expense to develop potential relationships that do not result in agreements or revenues, which may prevent us from pursuing other opportunities. Accordingly, excessive delays in sales could be material and adversely affect our business, financial condition or results of operations.

The nature of our products, customer base and sales channels causes us to lack visibility into future demand for our products, which makes it difficult for us to forecast our manufacturing and inventory requirements.

We use forecasts based on anticipated product orders to manage our manufacturing and inventory levels and other aspects of our business. However, several factors contribute to a lack of visibility with respect to future orders, including:

	·	the lengthy and unpredictable sales cycle for our products that can extend from six to 24 months or longer;

	·	the project-driven nature of many of our customers’ requirements;

	·	we primarily sell our products indirectly through distributors;

	·	the uncertainty of the extent and timing of market acceptance of our new products;

	·	the need to obtain industry certifications or regulatory approval for our products;

	·	the lack of long-term contracts with our customers;

	·	the diversity of our product lines and geographic scope of our product distribution;

	·	we have some customers who make single, non-recurring purchases; and

	·	a large number of our customers typically purchase in small quantities.

This lack of visibility impacts our ability to forecast our inventory requirements. If we overestimate our customers’ future requirements for products, we may have excess inventory, which would increase our costs and potentially require us to write-off inventory that becomes obsolete. Additionally, if we underestimate our customers’ future requirements, we may have inadequate inventory, which could interrupt and delay delivery of our products to our customers, harm our reputation, and cause our revenues to decline. If any of these events occur, they could prevent us from achieving or sustaining profitability and the value of our common stock may decline.

Delays in qualifying revisions of existing products for certain of our customers could result in the delay or loss of sales to those customers, which could negatively impact our business and financial results.

Our industry is characterized by intense competition, rapidly evolving technology and continually changing customer preferences and requirements. As a result, we frequently develop and introduce new versions of our existing products, which we refer to as revisions.

Prior to purchasing our products, some of our customers require that products undergo a qualification process, which may involve testing of the products in the customer’s system. A subsequent revision to a product’s hardware or firmware, changes in the manufacturing process or our selection of a new supplier may require a new qualification process, which may result in delays in sales to customers, loss of sales, or us holding excess or obsolete inventory.

After products are qualified, it can take additional time before the customer commences volume production of components or devices that incorporate our products. If we are unsuccessful or delayed in qualifying any new or revised products with a customer, that failure or delay would preclude or delay sales of these products to the customer, and could negatively impact our financial results. In addition, new revisions to our products could cause our customers to alter the timing of their purchases, by either accelerating or delaying purchases, which could result in fluctuations of our net revenue from quarter to quarter.

We depend upon a relatively small number of distributor and end-user customers for a large portion of our revenue, and a decline in sales to these major customers would materially adversely affect our business, financial condition, and results of operations.

Historically, we have relied upon a small number of distributors and end-user customers for a significant portion of our net revenue. Additionally, we expect an increased customer concentration from end-users in the near future based on existing customer supply agreements and order backlog. Our customer concentration could fluctuate, depending on future customer requirements, which will depend on market conditions in the industry segments in which our customers participate. The loss of one or more significant customers or a decline in sales to our significant customers could result in a material loss of sales and possible increase in excess inventories which would adversely affect our business, financial condition, and results of operations.

We depend on distributors for a majority of our sales and to complete order fulfillment.

We depend on the resale of products through distributor accounts for a substantial majority of our worldwide net revenue. In addition, sales through our top five distributors accounted for approximately 35% of our net revenue in fiscal 2023. A significant reduction of effort by one or more distributors to sell our products or a material change in our relationship with one or more distributors may reduce our access to certain end customers and adversely affect our ability to sell our products. Furthermore, if a key distributor materially defaults on a contract or otherwise fails to perform, our business and financial results would suffer.

In addition, the financial health of our distributors and our continuing relationships with them are important to our success. Our business could be harmed if the financial health of these distributors impairs their performance and we are unable to secure alternate distributors.

Our ability to sustain and grow our business depends in part on the success of our distributors and resellers.

A substantial part of our revenues is generated through sales by distributors and resellers. To the extent they are unsuccessful in selling our products, or if we are unable to obtain and retain a sufficient number of high-quality distributors and resellers, our operating results could be materially and adversely affected. In addition, our distributors and resellers may devote more resources to marketing, selling and supporting products and services that are competitive with ours, than to our products. They also may have incentives to promote our competitors' products over our products, particularly for our competitors with larger volumes of orders, more diverse product offerings and a longer relationship with our distributors and resellers. In these cases, one or more of our important distributors or resellers may stop selling our products completely or may significantly decrease the volume of products they sell on our behalf. This sales structure also could subject us to lawsuits, potential liability and reputational harm if, for example, any of our distributors or resellers misrepresents the functionality of our products or services to customers, violates laws or our corporate policies. If we fail to effectively manage our existing or future distributors and resellers effectively, our business and operating results could be materially and adversely affected.

Changes to the average selling prices of our products could affect our net revenue and gross margins and adversely affect results of operations.

In the past, we have experienced reductions in the average selling prices and gross margins of our products. We expect competition to continue to increase, and we anticipate this could result in additional downward pressure on our pricing. Our average selling prices for our products might also decline as a result of other reasons, including promotional programs introduced by us or our competitors and customers who negotiate price concessions. To the extent we are able to increase prices, we may experience a decline in sales volumes if customers decide to purchase competitive products. If any of these were to occur, our gross margins could decline and we might not be able to reduce the cost to manufacture our products enough or at all to keep up with the decline in prices.

If we are unable to sell our inventory in a timely manner, it could become obsolete, which could require us to write-down or write off obsolete inventory, which could harm our operating results.

At any time, competitive products may be introduced with more attractive features or at lower prices than ours. If this occurs, and for other reasons, we may not be able to accurately forecast demand for our products and our inventory levels may increase. There is a risk that we may be unable to sell our inventory in a timely manner to avoid it becoming obsolete. If we are required to substantially discount our inventory or are unable to sell our inventory in a timely manner, we would be required to increase our inventory reserves or write off obsolete inventory and our operating results could be substantially harmed.

Our failure to compete successfully in our highly competitive market could result in reduced prices and loss of market share.

The market in which we operate is intensely competitive, subject to rapid technological advances and highly sensitive to evolving industry standards. The market can also be affected significantly by new product and technology introductions and marketing and pricing activities of industry participants. Our products compete directly with products produced by a number of our competitors. Many of our competitors and potential competitors have greater financial and human resources for marketing and product development, more experience conducting research and development activities, greater experience obtaining regulatory approval for new products, larger distribution and customer networks, more established relationships with contract manufacturers and suppliers, and more established reputations and name recognition. For these and other reasons, we may not be able to compete successfully against our current or potential future competitors. In addition, the amount of competition we face in the marketplace may change and grow as the market for IoT and M2M networking solutions grows and new companies enter the marketplace. Present and future competitors may be able to identify new markets, adapt new technologies, develop and commercialize products more quickly and gain market acceptance of products with greater success. As a result of these competitive factors, we may fail to meet our business objectives and our business, financial condition and operating results could be materially and adversely affected.

Acquisitions, strategic partnerships, joint ventures or investments may impair our capital and equity resources, divert our management’s attention or otherwise negatively impact our operating results.

We may pursue acquisitions, strategic partnerships and joint ventures that we believe would allow us to complement our growth strategy, increase market share in our current markets and expand into adjacent markets, broaden our technology and intellectual property and strengthen our relationships with distributors, OEMs and ODMs. For instance, we acquired Maestro, Intrinsyc, the Transition Networks and Net2Edge businesses of CSI, and Uplogix in 2019, 2020, 2021 and 2022 respectively. Our previous acquisitions have required, and any future acquisition, partnership, joint venture or investment may also require, that we pay significant cash, issue equity and/or incur substantial debt. Acquisitions, partnerships or joint ventures may also result in the loss of key personnel and the dilution of existing stockholders to the extent we are required to issue equity securities. In addition, acquisitions, partnerships or joint ventures require significant managerial attention, which may be diverted from our other operations. These capital, equity and managerial commitments may impair the operation of our business. Furthermore, acquired businesses may not be effectively integrated, may be unable to maintain key pre-acquisition business relationships, may not result in expected synergies, an increase in revenues or earnings or the delivery of new products, may contribute to increased fixed costs, and may expose us to unanticipated liabilities. If any of these occur, we may fail to meet our business objectives and our business, financial condition and operating results could be materially and adversely affected.

We may experience difficulties associated with utilizing third-party logistics providers.

A majority of our physical inventory management process, as well as the shipping and receiving of our inventory, is performed by third-party logistics providers in Los Angeles, California and Hong Kong. There is a possibility that these third-party logistics providers will not perform as expected and we could experience delays in our ability to ship, receive, and process the related data in a timely manner. This could adversely affect our financial position, results of operations, cash flows and the market price of our common stock.

Relying on third-party logistics providers could increase the risk of the following: failing to receive accurate and timely inventory data, theft or poor physical security of our inventory, inventory damage, ineffective internal controls over inventory processes or other similar business risks out of our immediate control.

Risks Related to Technology, Cybersecurity and Intellectual Property

Cybersecurity breaches and other disruptions could compromise our information and expose us to liability, which could cause our business and reputation to suffer.

In the ordinary course of our business, we collect and store sensitive data, including intellectual property, our proprietary business information and that of our customers, suppliers and business partners, and personally identifiable information of our employees, on our networks and third-party cloud software providers. Increased global information technology (“IT”) security threats and more sophisticated and targeted computer crime pose a risk to the security of our systems and networks and the confidentiality, availability and integrity of our data. There have been several recent, highly publicized cases in which organizations of various types and sizes have reported the unauthorized disclosure of customer or other confidential information, as well as cyberattacks involving the dissemination, theft and destruction of corporate information, intellectual property, cash or other valuable assets. There have also been several highly publicized cases in which hackers have requested “ransom” payments in exchange for not disclosing customer or other confidential information or for not disabling the target company’s computer or other systems. The secure processing, maintenance and transmission of the information that we collect and store on our systems is critical to our operations and implementing security measures designed to prevent, detect, mitigate or correct these or other IT security threats involves significant costs. Although we have taken steps to protect the security of our information systems, we have, from time to time, experienced threats to our data and systems, including malware, phishing and computer virus attacks, and it is possible that in the future our safety and security measures will not prevent the systems’ improper functioning or damage, or the improper access or disclosure of personally identifiable information such as in the event of cyber-attacks. In addition, due to the fast pace and unpredictability of cyber threats, long-term implementation plans designed to address cybersecurity risks become obsolete quickly and, in some cases, it may be difficult to anticipate or immediately detect such incidents and the damage they cause. Any unauthorized access, disclosure or other loss of information could result in legal claims or proceedings, disrupt our operations, damage our reputation, and cause a loss of confidence in our products and services, which could adversely affect our business.

If our products become subject to cybersecurity breaches, or if public perception is that they are vulnerable to cyberattacks, our reputation and business could suffer.

We could be subject to liability or our reputation could be harmed if technologies integrated into our products, or our products, fail to prevent cyberattacks, or if our partners or customers fail to safeguard the systems with security policies that conform to industry best practices. In addition, any cyberattack or security breach that affects a competitor’s products could lead to the negative perception that our solutions are or could be subject to similar attacks or breaches.

Some of our software offerings may be subject to various cybersecurity risks, which are particularly acute in the cloud-based technologies operated by us and other third parties that form a part of our solutions.

In connection with certain implementations of our management software platform, application, and SaaS offering, ConsoleFlow, we expect to store, convey and process data produced by devices. This data may include confidential or proprietary information, intellectual property or personally identifiable information of our customers or other third parties with whom they do business. It is important for us to maintain solutions and related infrastructure that are perceived by our customers and other parties with whom we do business to provide a reasonable level of reliability and security. Despite available security measures and other precautions, the infrastructure and transmission methods used by our products and services may be vulnerable to interception, attack or other disruptive problems.

If a cyberattack or other security incident were to allow unauthorized access to or modification of our customers’ data or our own data, whether due to a failure with our systems or related systems operated by third parties, we could suffer damage to our brand and reputation. The costs we would incur to address and fix these incidents could significantly increase our expenses. These types of security incidents could also lead to lawsuits, regulatory investigations and increased legal liability, including in some cases contractual costs related to customer notification and fraud monitoring. Further, as regulatory focus on privacy and data security issues continues to increase and worldwide laws and regulations concerning the protection of information become more complex, the potential risks and costs of compliance to our business will intensify.

If software that we incorporate into our products were to become unavailable or no longer available on commercially reasonable terms, it could adversely affect sales of our products, which could disrupt our business and harm our financial results.

Certain of our products contain software developed and maintained by third-party software vendors or which are available through the “open source” software community. We also expect that we may incorporate software from third-party vendors and open source software in our future products. Our business would be disrupted if this software, or functional equivalents of this software, were either no longer available to us or no longer offered to us on commercially reasonable terms. In either case, we would be required to either redesign our products to function with alternate third-party software or open source software, or develop these components ourselves, which would result in increased costs and could result in delays in our product shipments. Furthermore, we might be forced to limit the features available in our current or future product offerings.

Our products may contain undetected software or hardware errors or defects that could lead to an increase in our costs, reduce our net revenue or damage our reputation.

We currently offer warranties ranging from one to five years on each of our products. Our products could contain undetected software or hardware errors or defects. If there is a product failure, we might have to replace all affected products, or we might have to refund the purchase price for the units. Regardless of the amount of testing we undertake, some errors might be discovered only after a product has been installed and used by customers. Any errors discovered after commercial release could result in financial losses and claims against us. Significant product warranty claims against us could harm our business, reputation and financial results and cause the market price of our common stock to decline.

We may not be able to adequately protect or enforce our intellectual property rights, which could harm our competitive position or require us to incur significant expenses to enforce our rights.

We rely primarily on a combination of laws, such as patent, copyright, trademark and trade secret laws, and contractual restrictions, such as confidentiality agreements and licenses, to establish and protect our proprietary rights. Despite any precautions that we have taken:

	·	laws and contractual restrictions might not be sufficient to prevent misappropriation of our technology or deter others from developing similar technologies;

	·	other companies might claim intellectual property rights based upon prior use that negatively impacts our ability to enforce our trademarks and patents; and

	·	policing unauthorized use of our patented technology and trademarks is difficult, expensive and time-consuming, and we might be unable to determine the extent of this unauthorized use.

Also, the laws of some of the countries in which we market and manufacture our products offer little or no effective protection of our proprietary technology. Reverse engineering, unauthorized copying or other misappropriation of our proprietary technology could enable third parties to benefit from our technology without paying us for it. Consequently, we may be unable to prevent our proprietary technology from being exploited by others in the U.S. or abroad, which could require costly efforts to protect our technology. Policing the unauthorized use of our technology, trademarks and other proprietary rights is expensive, difficult and, in some cases, impracticable. Litigation may be necessary in the future to enforce or defend our intellectual property rights, to protect our trade secrets or to determine the validity and scope of the proprietary rights of others. Such litigation could result in substantial costs and diversion of management resources, either of which could harm our business. Accordingly, despite our efforts, we may not be able to prevent third parties from infringing upon or misappropriating our intellectual property, which may harm our business, financial condition and results of operations.

The impact of natural disasters and other business interruptions could negatively impact our supply chain and customers resulting in an adverse impact to our revenues and profitability.

Certain of our components and other materials used in producing our products are from regions susceptible to natural disasters. A natural disaster could damage equipment and inventory at our suppliers’ facilities, adversely affecting our supply chain. If we are unable to obtain these materials, we could experience a disruption to our supply chain that would hinder our ability to produce our products in a timely manner, or cause us to seek other sources of supply, which may be more costly or which we may not be able to procure on a timely basis. In addition, our customers may not follow their normal purchasing patterns or temporarily cease purchasing from us due to impacts to their businesses in the region, creating unexpected fluctuations or decreases in our revenues and profitability. Natural disasters in other parts of the world on which our operations are reliant also could have material adverse impacts on our business.

In addition, our operations and those of our suppliers are vulnerable to interruption by fire, earthquake, power loss, telecommunications failure, cybersecurity breaches, IT systems failure, terrorist attacks and other events beyond our control, including the effects of climate change. A substantial portion of our facilities, including our corporate headquarters and other critical business operations, are located near major earthquake faults and, therefore, may be more susceptible to damage if an earthquake occurs. We do not carry earthquake insurance for direct earthquake-related losses. If a business interruption occurs, whether due to a natural disaster or otherwise, our business could be materially and adversely affected.

Risk Related to Liquidity and Capital Resources

We maintain cash deposits in excess of federally insured limits. Adverse developments affecting financial institutions, including bank failures, could adversely affect our liquidity and financial performance.

We regularly maintain domestic cash deposits in the Federal Deposit Insurance Corporation (“FDIC”) insured banks, which exceed the FDIC insurance limits. Bank failures, events involving limited liquidity, defaults, non-performance or other adverse developments that affect financial institutions, or concerns or rumors about such events, may lead to widespread demands for customer withdrawals and liquidity constraints that may result in market-wide liquidity problems. For example, on March 10, 2023, SVB failed and was taken into receivership by the FDIC. At that time, we maintained deposits amounting to approximately 85% of our total cash at SVB. On March 12, 2023, federal regulators announced that the FDIC would complete its resolution of SVB in a manner that fully protects all depositors, and on March 26, 2023, the assets, deposits and loans of SVB were acquired by First Citizens Bank. While we were able to regain full access to our deposits with SVB and have taken steps to diversify our banking relationships since then, our Loan Agreement with SVB currently requires us to hold 50% of our company-wide cash balances at SVB, and consequently any future failure of that bank could simultaneously prevent access to both a substantial portion of our cash holdings and to our credit line for funds needed to meet our working capital requirements and other financial commitments. Our cash balances are concentrated at a small number of financial institutions. In addition, current macroeconomic conditions have continued to cause turmoil in the banking sector since the failure of SVB. For example, on March 12, 2023, Signature Bank Corp. and Silvergate Capital Corp. were each swept into receivership, and on May 1, 2023, the FDIC took control of First Republic Bank and brokered its sale to JPMorgan Chase. Further bank failures, or other adverse conditions in the financial or credit markets impacting financial institutions at which we maintain balances, including disruptions that may cause delays in our ability to transfer funds, make payments, or withdraw funds whether held with SVB or other banks, could adversely impact our liquidity and financial performance. A failure to timely access our cash on deposit with SVB or other banks could require the scaling back of our operations and production, negatively affect our credit, and prevent us from fulfilling contractual obligations. Moreover, there can be no assurance that our deposits in excess of the FDIC or other comparable insurance limits will be backstopped by the U.S. or any applicable foreign government in the future or that any bank or financial institution with which we do business will be able to obtain needed liquidity from other banks, government institutions or by acquisition in the event of a future failure or liquidity crisis, and such uninsured deposits may ultimately be lost. In addition, if any of the parties with whom we conduct business are unable to access funds due to the status of their financial institution, such parties’ ability to pay their obligations to us or to enter into new commercial arrangements requiring additional payments to us could be adversely affected.

We have a history of losses.

We have historically incurred net losses. There can be no assurance that we will generate net profits in future periods. Further, there can be no assurance that we will be cash flow positive in future periods. In the event that we fail to achieve profitability in future periods, the value of our common stock may decline. In addition, if we are unable to achieve or maintain positive cash flows, we would be required to seek additional funding, which may not be available on favorable terms, if at all.

We may need additional capital and it may not be available on acceptable terms, or at all.

To remain competitive, we must continue to make significant investments to operate our business and develop our products. Our future capital requirements will depend on many factors, including the timing and amount of our net revenue, research and development expenditures, expenses associated with any strategic partnerships or acquisitions and infrastructure investments, and expenses related to litigation, each of which could negatively affect our ability to generate additional cash from operations. If cash generated from operations is insufficient to satisfy our working capital requirements, we may need to raise additional capital. Looking ahead at long-term needs, we may need to raise additional funds for a number of purposes, including, but not limited to:

	·	to fund working capital requirements;

	·	to update, enhance or expand the range of products we offer;

	·	to refinance existing indebtedness;

	·	to increase our sales and marketing activities;

	·	to respond to competitive pressures or perceived opportunities, such as investment, acquisition and international expansion activities; or

	·	to acquire additional businesses

We may seek additional capital from public or private offerings of our capital stock, borrowings under our existing or future credit lines or other sources. If we issue equity or debt securities to raise additional funds, our existing stockholders may experience dilution, and the new equity or debt securities may have rights, preferences and privileges senior to those of our existing stockholders. In addition, if we raise additional funds through collaborations, licensing, joint ventures, or other similar arrangements, it may be necessary to relinquish valuable rights to our potential future products or proprietary technologies, or grant licenses on terms that are not favorable to us. There can be no assurance that we will be able to raise any needed capital on terms acceptable to us, if at all. If we are unable to secure additional financing in sufficient amounts or on favorable terms, we may not be able to develop or enhance our products, take advantage of future opportunities, respond to competition or continue to operate our business.

The terms of our Senior Credit Facilities may restrict our financial and operational flexibility and, in certain cases, our ability to operate.

The terms of our Senior Credit Facilities restrict, among other things, our ability to incur liens, incur indebtedness, dispose of assets, make investments, make certain restricted payments, merge or consolidate and enter into certain speculative hedging arrangements. Further, we are currently and may in the future be required to maintain specified financial ratios, including pursuant to a maximum leverage ratio, a minimum fixed charge coverage ratio or a minimum liquidity test. Our ability to meet those financial ratios and tests can be affected by events beyond our control, and there can be no assurance that we will meet those tests. Pursuant to our amended credit agreement and the related loan and security agreement, we have pledged substantially all of our assets to our senior lender, SVB. In addition, the Loan Agreement with SVB currently requires us to hold 50% of our company-wide cash balances at SVB, which may limit our ability to manage our cash holdings effectively and could put a substantial portion of those holdings at risk in the event of a bank failure.

Risks Related to International Operations

Rising concern regarding international tariffs could materially and adversely affect our business and results of operations.

The current political landscape has introduced significant uncertainty with respect to future trade regulations and existing international trade agreements, as shown by the U.S.-initiated renegotiation of the North America Free Trade Agreement, Brexit in Europe, and the current war between Ukraine and Russia. This uncertainty includes the possibility of imposing tariffs or penalties on products manufactured outside the U.S., including the U.S. government’s institution of a 25% tariff on a range of products from China and subsequent tariffs imposed by the U.S. as well as tariffs imposed by trading partners on U.S. goods, the potential for increased trade barriers between the U.K. and the European Union, and export controls or other retaliatory actions against, or restrictions on doing business with Russia, as well as any resulting disruption, instability or volatility in the global markets and industries resulting from such conflict. The institution of trade tariffs both globally and between the U.S. and China specifically, carries the risk of negatively affecting the overall economic conditions of both China and the U.S., which could have a negative impact on us.

We cannot predict whether, and to what extent, there may be changes to international trade agreements or whether quotas, duties, tariffs, exchange controls or other restrictions on our products will be changed or imposed. If we are unable to source our products from the countries where we wish to purchase them, either because of regulatory changes or for any other reason, or if the cost of doing so increases, it could have a material adverse effect on our business, financial condition and results of operations. Furthermore, imposition of tariffs may result in local sourcing initiatives, or other developments that make it more difficult to sell our products in foreign countries, which would negatively impact our business and operating results.

We face risks associated with our international operations that could impair our ability to grow our revenues abroad as well as our overall financial condition.

We believe that our future growth is dependent in part upon our ability to increase sales in international markets. These sales are subject to a variety of risks, including geopolitical events, fluctuations in currency exchange rates, tariffs, import restrictions and other trade barriers, unexpected changes in regulatory requirements, longer accounts receivable payment cycles, potentially adverse tax consequences, and export license requirements. In addition, we are subject to the risks inherent in conducting business internationally, including political and economic instability and unexpected changes in diplomatic and trade relationships. In many markets where we operate, business and cultural norms are

SEC Form 10-K filed by Lantronix Inc.