UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
Form
| (Mark One) | |
| ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934. | |
|
For the fiscal year ended
| |
| TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934. |
For the transition period from ___ to _____
Commission
file number:
(Exact name of registrant as specified in its charter)
| (State
or Other Jurisdiction of Incorporation or Organization) |
(I.R.S.
Employer Identification No.) |
(Address including zip code of registrant’s Principal Executive Offices)
(Registrant’s Telephone Number, Including Area Code)
Securities registered pursuant to Section 12(b) of the Act:
| Title of each class | Trading Symbol(s) | Name of each exchange on which registered | ||
Securities registered pursuant to Section 12(g) of the Act:
None
Indicate
by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐
Indicate
by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐
Indicate
by check mark whether the registrant (1) has filed all reports required to be filed by Section 13or 15(d) of the Securities Exchange
Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2)
has been subject to such filing requirements for the past 90 days.
Indicate
by check mark whether the registrant has submitted electronically every Interactive Data file required to be submitted pursuant to Rule
405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant
was required to submit such files).
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and emerging growth company in Rule 12b-2 of the Exchange Act.
Large
accelerated filer ☐ Accelerated filer ☐
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
Indicate
by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness
of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered
public accounting firm that prepared or issued its audit report.
If
securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant
included in the filing reflect the correction of an error to previously issued financial statements.
Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐
Indicate
by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No
State
the aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which
the common equity was last sold, or the average bid and asked price of such common equity, as of the last business day of the registrant’s
most recently completed second fiscal quarter: $
Indicate the number of shares outstanding of each of the registrant’s classes of common stock, as of the latest practicable date: shares of Common Stock, $ par value at March 19, 2025.
DOCUMENTS
INCORPORATED BY REFERENCE:
CVD EQUIPMENT CORPORATION
INDEX TO ANNUAL REPORT ON FORM 10-K
| 2 |
INFORMATION CONCERNING FORWARD-LOOKING STATEMENTS
Except for historical information contained herein, this Annual Report on Form 10-K contains forward–looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended and Section 21E of the Securities Exchange Act of 1934, as amended. Readers are cautioned not to place undue reliance on forward-looking statements, as there can be no assurance that the plans, intentions or expectations upon which they are based will occur. These statements involve known and unknown risks and uncertainties that may cause our actual results or outcomes to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. These forward-looking statements are based on various factors and are derived utilizing numerous important assumptions and other important factors that could cause actual results to differ materially from those in the forward-looking statements. Important assumptions and other factors that could cause actual results to differ materially from those in the forward-looking statements, include, but are not limited to:
| ● | uncertainty as to our future growth and return to profitability; | |
| ● | uncertainty as to the general state of the silicon carbide wafer end market; | |
| ● | competition in our existing and potential future product lines of business, including our PVT150 / PVT 200 systems; | |
| ● | uncertainty as to our ability to identify and develop new products for growth markets; | |
| ● | our ability to obtain financing on acceptable terms if and when needed; | |
| ● | our ability to attract and retain key personnel and employees; | |
| ● | uncertainty as to changes to international trade policies including the possible imposition of tariffs; and | |
| ● | uncertainty as to our ability to adequately obtain raw materials and on commercially reasonable terms. |
Other factors and assumptions not identified above were also involved in the derivation of these forward-looking statements and the failure of such assumptions to be realized as well as other factors may also cause actual results to differ materially from those projected. We assume no obligation to update these forward-looking statements to reflect actual results, changes in assumptions, or changes in other factors affecting such forward-looking statements. Past performance is no guaranty of future results.
You should not place undue reliance on any forward-looking statements, which speak only as of the dates they are made. When used with this Report, the words “believes”, “anticipates”, “expects”, “estimates”, “plans”, “intends”, “will” and similar expressions are intended to identify forward-looking statements.
| 3 |
| Item 1. | Description of Business. |
The use of the words “CVD,” “we,” “us,” or “our,” refers to CVD Equipment Corporation, a New York corporation incorporated on October 13, 1982, and its wholly owned subsidiaries, CVD Materials Corporation (including its wholly owned subsidiaries, and CVD MesoScribe Technologies Corporation (“MesoScribe”) and Tantaline CVD Holding ApS (“Tantaline”)), and FAE Holdings 411519R LLC except where the context otherwise requires.
Overview
CVD has served the advanced materials markets with chemical vapor deposition, physical vapor transport and thermal process equipment for over 40 years. We are headquartered in Central Islip, New York with our SDC division located in Saugerties, New York.
We design, develop, and manufacture a broad range of equipment used to develop and produce materials and coatings for the aerospace, compound semiconductor, semiconductor, aerospace, battery energy storage markets as well as advanced industrial applications, and research.
We conduct our business through three reportable segments: i) CVD Equipment that designs and manufactures chemical vapor deposition, physical vapor transport and thermal process equipment; ii) SDC that designs and manufactures ultra-high purity gas and chemical delivery control systems; and iii) MesoScribe that provided products related to advanced materials and coatings.
Developments
On August 8, 2023, we entered into an agreement with a third party to sell certain assets and license certain propriety information of our MesoScribe subsidiary. We fulfilled remaining orders for MesoScribe products during 2024 and sold certain equipment resulting in the recognition of a gain on sale of equipment in 2024.
On May 26, 2023, we sold our Tantaline subsidiary located in Nordborg, Denmark in exchange for a nominal amount at closing and an earn-out provision based on any net income that Tantaline may earn during the five-year period ending December 31, 2027.
The decisions to sell our Tantaline subsidiary and close down the operations of MesoScribe were based on our strategy to focus on the equipment business consisting of the CVD Equipment and SDC segments.
Key Company Strengths
Based on more than 40 years of equipment experience, we use our capabilities in process development, engineering, and vertical manufacturing to transform emerging applications into mainstream manufacturing solutions.
| 4 |
We have built a library of design expertise, know-how and innovative solutions to assist our customers in developing these intricate processes and to accelerate their production and commercialization. This library of equipment design solutions, along with our manufacturing and systems integration facilities, allows us to provide application-specific design, process, and manufacturing solutions to our customers.
Our core competencies in equipment and software design, manufacturing and process development are used to engineer our finished products and to accelerate the commercialization path of our customer base. Our proprietary real-time software allows for rapid configuration, and provides our customers with enabling tools to understand, optimize and repeatedly control their processes. These factors reduce cost, improve quality, and reduce the time it takes between customers’ orders and the shipment of our products. Our Application Laboratory allows customers the option to bring their process tools to our laboratory and to work collaboratively with our scientists and engineers to optimize process performance.
To expand our presence into our major target markets, we are developing a line of proprietary standard use products to complement our customized legacy systems. Historically, we manufactured products for research and development on an application-specific basis to meet an individual customer’s specific research and production requirements. Our proprietary systems leverage the technological expertise that we have developed through designing these custom systems into a broader standardized product line. The standard product line can be configured from a wide range of available options to meet diverse product and budgetary requirements. Manufacturing these standardized systems in higher volumes may provide us the flexibility to reduce both the cost and delivery time of our systems as well as leverage our engineering development cost. These systems, which we market and sell under the CVD, FirstNano and EasyTube® product names, are sold to commercial companies, universities and research laboratories in the United States and throughout the world.
Sales of our proprietary standard systems, custom systems and process solutions have been driven by our installed customer base, which includes many Fortune 500 companies. The performance and success of our products has historically driven repeat orders from existing customers as well as generated business from new customers. Furthermore, with our proprietary solutions and expanded focus on “enabling tomorrow’s technologies”TM we have been developing a new customer base in addition to growing with our existing customers.
Key Growth Strategies
Our core strategy is to focus on growth applications in end markets related to aerospace, microelectronics, and industrial applications.
With respect to aerospace, our systems are being used by our customers to produce ceramic matrix composite materials (“CMCs”) that will be used in next generation gas turbine jet engines with the objective of reducing jet fuel consumption and contributing to the decarbonization of that industry.
During 2022, we also received an order from an aerospace company for a production chemical vapor infiltration (CVI) system that will be used to manufacture CMCs for gas turbine jet engine components. We received additional orders from the same aerospace company for three CVI systems in 2023 and one CVI system in 2024.
| 5 |
In February 2024, we received a multisystem order from an industrial customer for approximately $10 million that will be used for depositing a silicon carbide protective coating on OEM components and the units are expected to be delivered over 18 to 24 months period.
The phrase “electrification of everything” within the microelectronics market refers to the shift from fossil fuels to the use of electricity to power devices, buildings, electric vehicles (“EVs”) and many other applications. Our strategy yielded multisystem orders of PVT150 equipment that was delivered to one company in 2022 and 2023 that manufactures silicon carbide wafers.
In February 2024, we received an order from an additional customer for our new PVT200 system used to grow silicon carbide crystals for the manufacture of 200 mm wafers. This represents our second customer for our PVT equipment. This customer is evaluating our equipment performance for potential additional purchases of PVT equipment. We have also received orders from OneD Battery Materials in 2023, a company that is engaged in providing battery nanomaterials. We also provide a line of CVD systems which are used to develop and produce material for the anode portion of batteries.
Both technologies are essential for the support of the EV market. These systems should provide us with standard product offering to continue to support the EV focused market as well as energy storage, power conversion and power transmission. We are also evaluating our ability to provide other equipment used in the manufacturing process of silicon carbide wafers.
We have observed lower-than-anticipated industrywide electric vehicle sales which may reduce demand for silicon carbide and negatively impact sales of our PVT systems. In addition, the recent global over capacity of 150 mm silicon carbide wafers has reduced the market for 150 mm silicon carbide growth systems.
We have generally gained new customers through our industry reputation, as well as limited print advertising and trade show attendance. We have increased the number of trade shows and industry conferences we attend in 2024.
Major Target Markets
Our major target markets are aerospace & defense and industrial, microelectronics / high power electronics, and EV battery materials / energy storage.
Aerospace & Defense
CVD is a leading manufacturer of preform CVI and tow-coating systems to manufacture CMCs for aerospace gas turbine jet engine applications. Our customers include two of the leaders in aerospace gas turbine engines.
We continue to engage additional customers in the aerospace market regarding CMCs. During 2022, we received an order for a production CVI system. We received additional orders from the same aerospace company for three CVI systems in 2023 and one additional CVI system in 2024. These systems will be used to manufacture CMCs for aerospace gas turbine jet engines.
| 6 |
We believe our future growth will be derived from production applications in our major target markets. Our legacy product line continues to provide advanced equipment and subsystems to enable development of emerging technology and research applications.
Microelectronics / High Power Electronics
Demand for silicon carbide wafers to support high power electronics for energy storage and transmission/charging resulted in a multi-system order from a US-based, silicon carbide wafer manufacturer. Through December 31, 2024, we have received and delivered orders for 30 of our PVT150 physical vapor transport systems from one customer, which planned to use our systems to grow silicon carbide crystals that are made into 150 mm silicon carbide wafers for use in power electronics. In late 2023, we launched our PVT200 system designed to manufacture silicon carbide crystals for 200 mm wafer and in mid-2024 we received our first order from a second customer. We plan to continue to support the market with our PVT 200 system and possible future product development for the PVT200 product line. We will continue to monitor the market dynamics for silicon carbide wafers.
EV Battery Materials / Energy Storage
We have experienced increased interest and demand for nanotechnology materials including carbon nanotubes (CNTs), graphene and silicon nanowires (Si-NWs) to support the development and manufacturing for battery materials used in electric vehicles.
Our major targeted markets are further described as follows (the term “legacy product” refers to products and systems within our product offerings that we have produced in our history):
| Major Target Markets: | Description and Growth Drivers: | CVD Equipment Products and Services: | |||
| Aerospace, Defense and Industrial | Next generation gas turbine jet engines are incorporating CMC material for the hot section or exhaust of the engine to improve fuel efficiency. | Production and R&D Applications: | |||
| Silicon carbide coating is used as a protective barrier in many OEM equipment components used in LED and other applications. | - | Fiber tow coat system. Mass production system for multi-layer coating for CMCs. | |||
| - | Silicon bond coat environmental barrier depositing system. Deposits Si on machined gas turbine jet engine CMC components and other OEM components. | ||||
| - | Chemical Vapor Deposition/ Chemical Vapor Infiltration production coating system for multi-layer CMC coatings on SiC fiber preforms. | ||||
| - | Chemical Vapor Deposition production coating system for high volume low cost deposition of SiC coating. | ||||
Microelectronics / High Power Electronics
|
The shift to electrification has the objectives of reducing emissions and reducing dependency on fossil fuels. This has driven the demand for electric vehicle and associated high power electronics used in charging and motor power conversion. | Production Applications: | |||
| - | PVT150 SiC crystal growth system launched in 2022. | ||||
| - | PVT200 SiC crystal growth system launched in 2023. | ||||
| - | HVPE400: polycrystalline GaN (legacy product). | ||||
EV Battery Materials / Energy Storage
|
The shift to electrification also requires improvements in energy storage, specifically with the use of novel anode materials. | Production Applications: | |||
| - | PowderCoat-1100 production system launched in 2021 grows Si nanowires on carbon nanoparticles. | ||||
| - | Carbon-150: Single substrate system for CNT growth. Versatile substrate format, on wafer or foil. | ||||
| - | Carbon-300: Multiple substrate batch tube system for CNT growth. Versatile substrate format, on wafer or foil. | ||||
R&D Applications: | |||||
| - | ET-3000: Versatile CNT growth system for research and development. | ||||
| 7 |
| Other Markets | CVD Equipment Products: | ||
| - | Universal liquid and gas storage cabinets, management, and delivery systems (SDC segment). | ||
| - | Production MOCVD Super Conducting Tape system. | ||
| - | ET-3000: MOCVD for compound semiconductor R&D. | ||
| - | ET-3000 for graphene. | ||
| - | ET-6000: Multi-Tube Chemical Vapor Deposition Tube furnace (metals, oxides and nitrides). | ||
| - | PowderCoat-300 for powder material R&D (including battery anode). | ||
| - | TMD: cluster tool for advanced material development. | ||
Bookings
During 2024, bookings of new orders from customers was approximately $28.1 million, representing an increase of approximately 8.9% compared to 2023 bookings of $25.8 million. The increase in bookings of $2.3 million was related to an increase in aerospace and industrial orders.
Segments
CVD Equipment - supplies state-of-the-art chemical vapor deposition and thermal process equipment targeting growth production markets as well as systems for use in research and development. This includes systems marketed under the FirstNano product brand. Utilizing our over 40 years of expertise in the design and manufacture of chemical vapor deposition and thermal process equipment, we provide material processing capability and control at a competitive cost of ownership.
The targeted growth production markets include aerospace advanced materials primarily for gas turbine jet engines, high power electronics (both silicon carbide (SiC) and gallium nitride (GaN)), and nanomaterials used in batteries. The product group also consists of legacy products serving the production and R&D applications such as semiconductors, LEDs, carbon nanotubes, nanowires, solar cells and several other industrial & research applications.
Our developments and opportunities for the carbon composite business come from achievements in our Applications Laboratory. The Applications Laboratory, along with the sales and marketing team continue to explore carbon-based products and applications that can be made from our CNT, infiltrated carbon/CVI and carbon nano fiber technology (CNF). Some applications include CNT and infiltrated carbon/CVI based battery material and CNF capacitors for 5G technology.
| 8 |
To support new emerging applications, we provide equipment to and collaborate with laboratory scientists to bring state-of-the-art processes from the research laboratory into production. CVD Equipment group provides process development value through our Application Laboratory where our personnel interact directly with the scientists and engineers of our customer base to develop solutions to tomorrow’s challenges today. CVD Equipment segment operates from our 128,000 square feet facility in Central Islip, New York.
SDC - designs and manufactures ultra-high purity gas and chemical delivery control systems for state-of-the-art semiconductor fabrication processes, aerospace, solar cells, LEDs, carbon nanotubes, nanowires, and a number of industrial applications. Our SDC products are sold on a stand-alone basis and are also integrated into certain CVD equipment. This internal supply of chemical and gas delivery systems and components provide a competitive advantage for our CVD Equipment group over its competition. SDC operates from a 22,000 square foot facility fitted with a clean room manufacturing space located in Saugerties, New York.
MesoScribe - consisted of MesoScribe’s direct write printed electronics business. MesoScribe provided MesoPlasma™ printing services and products (heaters, antennas, and sensors) to aerospace, satellite, power generation, defense, and other markets requiring high performance. MesoScribe operations were located at our main facility in Central Islip, New York.
On August 8, 2023, we entered into an agreement with a third party to sell certain assets and license certain proprietary information of MesoScribe. We fulfilled remaining orders for MesoScribe products during 2024,completed the sales of the equipment assets and ceased operations as of September 30, 2024.
Products and Technology
Chemical Vapor Deposition/Infiltration – Chemical vapor deposition is a method of coating or growing material through a chemical disassociation and recombination at elevated temperatures onto or within pores of a substrate material. A single or collection of gases or vapor introduced on to the surface or into pores of a substrate material that is heated to such a degree that the gases decompose and deposits a desired layer onto and or into a substrate material. Chemical vapor infiltration (CVI) is a variant of a chemical vapor deposition process that is performed at low pressures to allow for coating the internal surfaces of a porous material. Using heat and low pressure, precursor vapors penetrate the pores/fiber of the material and deposit to form a conformal coating on the internal surfaces. Both processes are accomplished by combining appropriate gases in a reaction chamber, of the kind we manufacture, at elevated temperatures (typically 500° to 2,500° Celsius). Our chemical vapor deposition and CVI systems are complete and include all necessary heating techniques, precise control instrumentation, gas delivery and abatement subsystems and components and include state-of-the-art proprietary process control software. We provide both standard and emerging applications specified products. Some of the standard systems we offer are for SiC, GaN, Aluminum Nitride (AlN), CMCs, silicon (Si), CNT, graphene, silicon nanowires. The systems are sold under the CVD and FirstNano product brands.
| 9 |
Physical Vapor Transport (PVT) – While the PVT150 was officially launched for production in 2022, we have sold PVT systems in prior years and have pioneered both resistive heating and more effectively inductively heated PVT systems. The PVT150 system was specifically designed to address the SiC crystal growth market for 150 mm substrates or wafers. Designed to provide enhanced process parameter control it allows existing and future customers the ability to tightly control and monitor the crystal growth process for 150mm substrates. A 200 mm version called the PVT200 was developed during 2023, and the first order was received in February 2024 and delivered in 2024. The crystal growth technique utilized a high temperature furnace to vaporize from seed granular material of SiC and further deposit out in an ordered crystal structure onto substrate wafer. The process takes days to over a week to complete and yield a SiC crystal ready for further processing into wafers.
Rapid Thermal Processing (RTP) – Used to heat semiconductor materials to elevated temperatures of up to 1,200° Celsius at rapid rates of up to 200° Celsius per second. Our RTP systems are offered for implant activation, oxidation, silicide formation and many other processes. We offer systems that can operate both at atmospheric and reduced pressures.
Annealing, Diffusion and Low-Pressure Chemical Vapor Deposition (LPCVD) Furnaces – These furnaces are used for dislocation removal in crystals, dopant diffusion, oxidation, for SiC, Si, SiOx and other applications. The systems are normally operated at atmospheric and/or reduced pressure with gaseous atmospheres related to the process. An optional feature of the system allows for the heating element to be moved away from the process chamber allowing the wafers to rapidly cool or be heated in a controlled environment. Our temperature control system enables more precise control of the wafers. The systems are equipped with an automatic process controller, permitting automatic process sequencing and monitoring with safety alarm provisions.
Ultra-High Purity Gas and Liquid Control Systems – Our standard and custom designed gas and liquid control systems, which encompass gas cylinder storage cabinets, custom gas and chemical delivery systems, gas and liquid valve manifold boxes and gas isolation boxes, provide safe storage and handling of pressurized gases and chemicals. Our system design allows for automatic or manual control from both a local and remote location. These subsystems and components are provided to the general market as well as support the CVD Equipment segment.
Quartzware – The majority of our process equipment solutions, utilize quartz components which we partially manufacturer internally. In addition, the equipment typically requires routine maintenance, consumable and spare parts. One such spare part and consumable which is core to our technology offering is quartz hardware. We provide standard and custom fabricated quartzware used in our equipment and to a lesser extent for other customer tools.
Intellectual Property
Our success is dependent, in part upon the development and protection of our proprietary technology and other proprietary rights. We have historically and continue to protect our proprietary information and intellectual property such as design specifications, blueprints, technical processes, and employee know-how through the use of patents and non-disclosure agreements. In the area of patents, we believe there is value in having protected intellectual property and will continue to file for patent protection of our proprietary technology that we believe has the potential to be incorporated into our products and sold to multiple customers. We also maintain certain trademarks relating to certain of our products and product lines and claim copyright protection for certain proprietary software and documentation.
| 10 |
While patent, copyright and trademark protections for our intellectual property are important to different degrees for our various products and solutions, we believe our future success in highly dynamic markets is most dependent upon the technical competence and creative skills of our personnel and our ability to accelerate the commercialization of next generation intellectual properties. We strive to protect our trade secrets and other proprietary information through non-disclosure agreements with our customers, suppliers, employees and consultants and other security measures.
Research and Development
We develop new products based on market analysis or by customer request. The technology included in our product development includes mechanical hardware, software and controls systems and overall configuration. Our research and development activities over have yielded a wealth of technology from which systems and solutions can be derived from and productized. Together with a number of leading universities and startup companies with whom we partner from time to time, we conduct research on Si deposition for both aerospace Si bond coat and microelectronic applications, SiC growth, the growth and infiltration of carbon nanotubes, graphene and nanowires as well as on selected aerospace manufacturing processes. Our intention is that together with customers and universities, we will leverage our collective expertise in this field, which we believe will allow us to capitalize on commercial opportunities in the future.
Markets and Marketing
We serve multiple emerging and mature global markets including compound semiconductor high power electronics, aerospace, defense, battery energy storage, silicon and other microelectronic and micromechanical devices, semiconductor, universities, and research centers. Due to the highly technical nature of our products, we believe it is essential to engage with customers directly through our sales personnel, our network of domestic and international independent sales representatives, and distributors specializing in the type of equipment, products, and services that we sell. Our primary marketing activities include direct sales engagement, participation in trade associations and trade shows and our internet websites. We expanded our marketing activities through attendance at key tradeshows and online marketing.
Customers
Our systems and products are used in both production applications and advanced materials research. We market and sell primarily to companies that are the engaged in producing aerospace gas turbine jet engine component material, defense, compound semiconductor wafers, battery energy storage, silicon and other microelectronic and micromechanical devices, semiconductor, universities and research centers. We have both a domestic and international customer base.
| 11 |
Given the complexity and magnitude of the systems we sell, revenue from a single customer in any one year can exceed 10% of our total sales. During the year ended December 31, 2024, one customer represented 29.5% of our revenues, while in 2023 three customers represented 14.3%, 13.5% and 10.9% of our revenues. While we believe that our relationships with these customers are generally positive, the loss of a large customer would have to be replaced by others, and our inability to do so could have a material adverse effect on our business and financial condition.
For the year ended December 31, 2024, approximately 4.3% of our revenues were generated by sales to customers outside the U.S., compared to approximately 17.2% for the year ended December 31, 2023.
Competition
We can experience intense direct competition from both domestic and international competitors in all our product segments. Our CVD Equipment product lines, including FirstNano, target multiple markets and both production and research customers. Competition is substantial in both the production applications and research. In production application, competition comes from larger companies offering enhanced services. In research applications, the competition comes from small companies that compete with us mostly on price. We are aware of other competitors that offer a substantial number of products and services comparable to ours. Many of our competitors (including customers who may elect to manufacture systems for internal use) have financial, marketing and other resources greater than our own. To date, we believe that each of our product and service segments has been able to compete favorably in markets that include these competitors, primarily based on know-how, technical performance, quality, delivery, price and aftermarket support. We continue to focus on products, which serve markets that are growing and where we have a technical and commercially competitive advantage.
CVD Equipment competes with companies located in Asia, Europe, and the US in both the production and research market. In the production and research markets, some of our potential customers built their own equipment. Additionally, there are large established companies who compete with us and pose a competitive risk in the market. Due to budgetary and funding constraints, many customers are price sensitive. We believe that our systems are among the most advanced available for the targeted market and coupled with our vertical integration in engineering and manufacturing, we believe that we can compete effectively.
SDC’s gas management and chemical delivery control systems are among the most advanced available. We further believe that SDC is differentiated from our competitors through our deep understanding of how the systems in which our products are incorporated are used in field applications. We have gained this understanding as a result of having designed and built complex process gas systems for our CVD Equipment group as well as for a number of the world’s leading semiconductor, aerospace, medical, solar manufacturers, research laboratories and universities.
Sources of Supply
Many of the components used in producing our products are purchased from unrelated suppliers. We have OEM status with our suppliers, but we are not obligated to purchase a pre-determined quantity. We are not dependent on a principal or major supplier and alternate suppliers are available. Historically, subject to lead times, the components and raw materials we used in manufacturing our products were readily obtainable.
| 12 |
We maintain a fully equipped machine shop that we use to fabricate a significant portion of our metal components in-house, including the most intricately designed parts of our equipment. We expanded our machine shop in 2022 to allow us to expand our ability to fabricate parts. Our quartz fabrication capability is currently sufficient to meet our quartzware needs. We believe our vertical manufacturing integration is a competitive advantage.
Materials procured from suppliers and/or manufactured internally undergo a rigorous quality control process to ensure that the parts meet or exceed our requirements and those of our customers. Upon final assembly, all equipment undergoes a final series of complete testing to ensure maximum product performance.
Backlog
As of December 31, 2024, our backlog was approximately $19.4 million, compared to $18.4 million as of December 31, 2023, an increase of $1.0 million. Our backlog at December 31, 2024 consists of approximately $17.4 million remaining performance obligations for system contracts in progress and not yet started and the balance of approximately $1.9 million represents other non-system orders received from customers. The timing for completion of backlog varies depending on the product mix and can be as long as two years or as short as 30-60 days.
There can be no assurance that our backlog will result in actual revenue in any particular period, or at all, or that any contract included in backlog will be profitable. The actual amount and timing of any revenue is subject to various contingencies, many of which are beyond our control, such as cancellations and delays. As a result of these contingencies, we may adjust our backlog if we determine that such orders are no longer firm. In addition to adjustments from these types of contingencies, variations in backlog from time to time are attributable, in part, to changes in sales mix, the timing of contract proposals, the timing of contract awards, delivery schedules on specific contracts. As a result, we believe our backlog and orders, at any point in time, are not necessarily indicative of the total sales anticipated for any future period.
Government Regulations
We are subject to a variety of federal, state and local government regulations, such as environmental, labor and export control regulations. We believe that we have obtained all necessary permits to operate our business and that we are in material compliance with all laws and regulations applicable to us. These regulations are subject to change and the effect of these changes could materially impact our business in certain technology areas and regions.
Utilizing our in-house safety team, engineering expertise and consultants as required, we continue to monitor and comply with applicable Environmental Health and Safety regulations at our facilities as well as the installation of equipment at our customer facilities.
| 13 |
With respect to our sales to customers located in China or elsewhere outside the United States, products which (i) are manufactured in the United States, (ii) incorporate controlled U.S. origin parts, technology, or software, or (iii) are based on U.S. technology, are subject to the U.S. Export Administration Regulations (“EAR”). We continue to monitor, review, and maintain ongoing compliance with the EAR with respect to our export sales.
Product Liability
Our products are used in our customers’ manufacturing processes, which in some cases contain explosive, flammable, corrosive, and toxic gases. There are potential exposures to personal injury as well as property damage, particularly if operated without regard to the design limits of the systems and components. Additionally, the end products of some of our customers are used in areas such as aerospace and high-tech devices where safety is of great concern. Management reviews its insurance coverage on an annual basis or more frequently, if appropriate, and we believe we have the types and amounts of insurance coverage that are sufficient for our business.
Human Capital
We consider our employees a vital asset to our business and strive to ensure we foster a work environment of respect, communication, objective orientation, and personal life balance. We believe this results in a higher level of employee satisfaction and hence improved performance and employment longevity. On December 31, 2024, we had 118 employees. We had 58 employees in manufacturing, 30 in engineering (including research and development and efforts related to product improvement), 5 in field service, 10 in sales and marketing and 15 in general management, maintenance and administration, compared to 128 employees as of December 31, 2023. None of our employees were subject to a collective bargaining agreement.
The implementation of our business strategy depends on our ability to hire, train, and retain qualified and diverse professionals, and we must emphasize employee development and training to do so. We are committed to identifying and developing the talents of our next generation of managers and intend to establish a strong succession-planning program for our critical positions, including internships for technical and engineering resources from local universities. Moreover, a key strategic focus of our management team is to foster and maintain a strong and healthy culture, where collaboration to achieve results and focus on the success of our customers and shareholders is paramount.
Employee Safety
The health and safety of our employees and partners is our highest priority, and this is consistent with our operating philosophy. We maintain strong environmental, health and safety protocols that focus on implementing policies and training programs, as well as performing self-audits to ensure our colleagues and partners leave the workplace safely on a daily basis.
| 14 |
Employee Compensation
Management continues to review our employee compensation programs to better align the compensation of our employees with our objectives, performance, and personal performance, and to provide the proper short-term and long-term incentives to attract, retain and motivate them to achieve superior results. We believe we must offer wages that are competitive and consistent with employee positions, skill levels, experience, and knowledge, and in order to do so we may work with a nationally recognized outside compensation and benefits consulting firm to independently evaluate the effectiveness of our executive and non-executive compensation and benefit programs and to provide benchmarking against our peers within our industry.
Equal Opportunity
We are committed to building and sustaining a culture of equal opportunity that encourages all of our employees to reach their full potential. Our CVD team, like the technologies we enable, is a rich combination of diverse individuals coming together to make a material difference for our people, our customers, and the world. As a company that enables tomorrow’s technologies, we recognize that a diverse employee population makes CVD a stronger, more innovative, and a more engaging place to work. We are always striving to attract talented individuals from a diverse candidate pool.
Available Information
Our website address is www.cvdequipment.com and the contents of our website, including our investor relations website, is not incorporated by reference into this filing or any other report we file with or furnish to the SEC. We have no duty to update or revise any forward-looking statements in this Annual Report on Form 10-K or in other reports filed with the SEC, whether as a result of new information, future events or otherwise, unless we are required to do so by law. The SEC maintains a website (www.sec.gov) that contains reports, proxy and information statements and other information regarding issuers that file electronically with the SEC.
| 15 |
| Item 1A. | Risk Factors |
In addition to the other information set forth in this Annual Report on Form 10-K, our shareholders should carefully consider the risk factors described below. The risks set forth below may not be the only risk factors relating to the Company. Any of these factors, many of which are beyond our control, could materially adversely affect our business, financial condition, operating results, cash flow and stock price.
Risk categories:
| ● | Risks related to sales and product development | |
| ● | Risks related to manufacturing and supply chain | |
| ● | Risks related to cybersecurity, intellectual property and regulatory compliance | |
| ● | Risks related to financial and accounting matters | |
| ● | Risks related to product liability | |
| ● | Risks related to our stock | |
| ● | General risk factors |
Risks related to sales and product development
Historically, we have maintained a highly concentrated customer base so that changes in ordering patterns, delays or order cancellations could have a material adverse effect on our business and results of operations.
During 2024, one customer represented 29.5% of our total revenues. The loss of a major customer would have to be replaced by others, and our inability to do so may have a material adverse effect on our business and financial condition. We expect that contracts or orders from a relatively limited number of customers will, at times, continue to account for a substantial portion of our business. The mix and type of customers, and sales to any single customer, may vary significantly from quarter to quarter and from year to year. If any major customer did not place orders, or if they substantially reduced, delayed, or cancelled orders, we may not be able to replace the business in a timely manner or at all, which can and has had a material adverse effect on our results of operations and financial condition.
Our lengthy and variable sales cycle makes it difficult to predict our financial results.
The marketing, sale and manufacture of our products, often requires a lengthy sales cycle ranging from several months to over one year before we can complete production and delivery. The lengthy sales cycle makes forecasting the volume and timing of sales difficult and raises additional risks that customers may cancel or decide not to enter into contracts. The length of the sales cycle depends on the size and complexity of the project, the customer’s in-depth evaluation of our products, and, in some cases, the protracted nature of a bidding process.
Because a significant portion of our operating expenses are fixed, we have and may continue to incur substantial expense before we earn associated revenue. If customer cancellations occur, they could result in the loss of anticipated sales without allowing us sufficient time to reduce our operating expenses.
| 16 |
If any of our customers cancel or fail to accept a large system order, our financial position and results of operations could be materially and adversely affected.
Our backlog includes orders for customized systems including our chemical vapor deposition equipment and furnaces which are built to client specifications. These customized systems can have prices up to several million dollars, depending on the configuration, specific options included and any specific requirements of the customer. Because our orders are subject to cancellation or delay by the customer, our backlog at any point in time is not necessarily representative of actual sales for succeeding periods, nor does our backlog provide any assurance of achievement of revenues or that we will realize a profit from completing these orders. Our financial position and results of operations could be materially and adversely affected should any large system order be cancelled prior to shipment or not be accepted by the customer due to alleged non-conformity with product specifications or otherwise. Likewise, a significant change in the liquidity or financial position of any of our customers that purchase large systems, could have a material impact on the collectability of our accounts receivable and our future operating results. Our backlog does not provide any assurance that we will realize a profit from those orders or indicate in which period revenue will be recognized.
If demand declines for chemical vapor deposition/infiltration, physical vapor transport, gas control and related equipment, or for carbon nanotube and nanowire deposition systems, our financial position and results of operations could be materially adversely affected.
Our products are utilized to develop and manufacture materials and coatings for industrial and research applications that are used in numerous markets including but not limited to power electronics, battery materials, aerospace, nano and advanced electronic components. A significant part of our growth strategy involves continued expansion of the sales of our products for industrial as well as research and development purposes by companies, universities, and government-funded research laboratories. The availability of funds for these purposes may be subject to budgetary and political restrictions, as well as cost-cutting measures by manufacturers in the markets in which we operate.
If the availability of funds or the demand for capital equipment in the markets in which we operate declines, the demand for our products would also decline and our financial position and results of operations could be harmed.
The demand for our products and the profitability of our products can change significantly from period to period because of numerous factors.
The industries in which we operate are characterized by ongoing factors, including:
| ● | global and regional economic developments and conditions including in Europe and Asia; | |
| ● | governmental budgetary and political constraints; |
| 17 |
| ● | changes in the capacity utilization and production volume for research and industrial applications in the markets in which we operate; | |
| ● | the profitability and capital resources of manufacturers in the markets in which we operate; | |
| ● | changes in technology; | |
| ● | the availability of funds for research and development; and | |
| ● | the effects of supply chain disruptions. |
For these and other reasons, our results of operations for past periods may not necessarily be indicative of future operating results.
Our business might be adversely affected by our dependence on foreign business.
Because a material portion of our revenues are traditionally derived from international customers, our operating results could be negatively affected by a decline in the economies of any of the countries or regions in which we do business. Each region can exhibit unique characteristics, which can cause capital equipment investment patterns to vary significantly from period to period. Periodic local or international economic downturns, trade balance issues and political instability including trade disruptions and the imposition of tariffs, as well as fluctuations in interest and currency exchange rates. Any significant increases in tariffs on a broad array of goods, could negatively affect our business and results of operations.
The majority of our sales to date have been primarily priced in U.S. dollars. While our business has not been materially affected in the past by currency fluctuations, there is a risk that it may be materially adversely affected in the future. Such risks include possible losses due to both currency exchange rate fluctuations and from possible social and political instability.
United States trade policies that restrict imports or increase import tariffs may have a material adverse effect on our business.
There have been significant changes and proposed changes in recent years to U.S. trade policies, tariffs, and treaties affecting imports. Any significant increases in tariffs on a broad array of important goods, could negatively affect our business and results of operations.
In response to the tariffs announced by the U.S., China and other countries have imposed or proposed additional tariffs on certain exports from the United States. There is current uncertainty about the future relationship between the United States and other countries with respect to trade policies, taxes, government regulations, and tariffs and we cannot predict whether, and to what extent, U.S. trade policies will change in the future, including as a result of changes by the new U.S. presidential administration. A significant proportion of our materials and components are manufactured in China and other regions outside of the United States. Accordingly, such U.S. policy changes have made it and may continue to make it difficult or more expensive for us to obtain certain products manufactured outside the United States, which could affect our revenue and profitability. Any of these factors could depress economic activity and restrict our access to suppliers or customers and could have a material adverse effect on our business, financial condition, and results of operations.
| 18 |
Our reputation and operating performance may be negatively affected if our products are not timely delivered.
We provide complex products that often require substantial lead-time for design, ordering parts and materials, and for assembly and installation. The time required to design, order parts and materials and to manufacture, assemble and install our products, may in turn lead to delays or shortages in the availability of some products. If a product is delayed or is the subject of shortage because of problems with our ability to design, manufacture or assemble the product on a timely basis, obtain necessary materials and components, or if a product or software otherwise fails to meet performance criteria, we may lose revenue opportunities entirely, or experience delays in revenue recognition associated with a product or service. In addition, we may incur higher operating expenses during the period required to correct the problem.
We may not be able to keep pace with the rapid change in the technology we use in our products.
We believe that our continued success in the markets in which we operate depends, in part, on our ability to continually improve existing technologies and to develop and manufacture new products and product enhancements on a timely and cost-effective basis. We must be able to introduce these products and product enhancements into the market in a timely manner, in response to customer’s demands for higher-performance research and assembly equipment, customized to address rapid technological advances in capital equipment designs.
Technological innovations are inherently complex and require long development cycles and appropriate professional staffing. Our future business success depends on our ability to develop and introduce new products, or new uses for existing products, that successfully address changing customer needs. Our success also depends on our ability to achieve market acceptance of our new products. To maintain our success in the marketplace, we may have to substantially increase our expenditures on research and development. If we do not develop and introduce new products, technologies or uses for existing products in a timely manner and continually find ways to reduce the cost of developing and producing them in response to changing market conditions or customer requirements, our business could be seriously harmed.
We face significant competition, and we are relatively small in size and have fewer resources in comparison with many of our competitors.
We face significant competition throughout the world, which may increase as certain markets in which we operate continue to evolve. Our future performance depends, in part, upon our ability to continue to compete successfully worldwide. Some of our competitors are diversified companies that have substantially greater financial resources and more extensive research, engineering, manufacturing, marketing and customer service and support capabilities than we can provide. We face competition from companies whose strategy is to provide a broad array of products, some of which compete with the products and services that we offer, as well as companies, universities and research laboratories that have the capacity to design and build their own equipment internally. These competitors may bundle their products and services in a manner that may discourage customers from purchasing our products. In addition, we face competition from smaller emerging processing equipment companies, whose strategy is to provide a portion of the products and services that we offer at often lower prices than ours, using innovative technology to sell products into specialized markets. Loss of competitive position could impair our prices, customer orders, revenue, gross margin, and market share, any of which would negatively affect our financial position and results of operations. Our failure to compete successfully with these other companies would seriously harm our business. There is a risk that larger, better financed competitors will develop and market more advanced products than those we currently offer, or that competitors with greater financial resources may decrease prices, thereby putting us under financial pressure.
| 19 |
Risks related to manufacturing and our supply chain
Manufacturing interruptions or delays could affect our ability to meet customer demand and lead to higher costs, while the failure to estimate customer demand accurately could result in excess or obsolete inventory.
Our business depends on timely supply of equipment, services and related products that meet the rapidly changing technical and volume requirements of our customers. Some key parts to our products are subject to long lead-times and/or obtainable only from a single supplier or limited group of suppliers. Cyclical industry conditions and the volatility of demand for manufacturing equipment increase capital, technical, operational and other risks for us and for companies throughout our supply chain. Further, these conditions may cause some suppliers to scale back operations, exit businesses, merge with other companies, or file for bankruptcy protection and possibly cease operations. We have also experienced and continue to experience significant disruptions in our supply chain, resulting in delays and higher costs to procure certain components and materials that we utilize in our business.
We may also experience significant interruptions of our manufacturing operations, delays in our ability to deliver products or services, increased costs or customer order cancellations as a result of:
| ● | The failure or inability of suppliers to timely deliver sufficient quantities of quality parts on a cost-effective basis; | |
| ● | Volatility in the availability and cost of materials, including rare earth elements; | |
| ● | Difficulties or delays in obtaining required import or export approvals; | |
| ● | Information technology or infrastructure failures; and | |
| ● | Natural disasters or other events beyond our control (such as earthquakes, floods or storms, regional economic downturns, pandemics, social unrest, political instability, terrorism, or acts of war). |
If a supplier fails to meet our requirements concerning quality, cost, or other performance factors, we may transfer our business to alternative sources, which could entail manufacturing delays, additional costs, or other difficulties. In addition, if we need to rapidly increase our business and manufacturing capacity to meet increases in demand or expedited shipment schedules, this may exacerbate any interruptions in our manufacturing operations and supply chain and the associated effect on our working capital.
| 20 |
Supply chain delays and cost increases that may adversely affect our business, including potential cost increases from the imposition of tariffs.
Geopolitical developments across Europe and Asia have and may continue to restrict our ability to procure raw materials and components such as nickel and integrated circuits. Since 2021, we have experienced increased costs on certain components as well as delays in supply chain delivery, which may also impact our ability to recognize revenue and reduce our gross profit margins, as well as extend our manufacturing lead times and reduce our manufacturing efficiencies. In addition, political and trade tensions have resulted in the imposition of tariffs which may affect our supply chain and the costs of components and materials. . Any significant increases in tariffs on components and materials that we purchase could negatively affect our business and results of operations. We have begun placing orders with more lead time to help mitigate the manufacturing delays, as well as assessing other suppliers or components to attempt to mitigate the potential cost impacts In addition, we are utilizing our in-house flexible manufacturing to attempt to further mitigate both potential schedule delivery delays and material cost increase, as well as increasing sales prices. While we have taken actions to mitigate the potential negative impacts to our revenue and profitability, there can be no assurance of the ultimate impact and the length of time that the supply chain factors, including tariffs, may impact our revenues and profitability.
Inflation has and may continue to adversely affect our business, financial condition, and results of operations.
Recent global inflation has adversely affected our costs, including the cost of materials, production, and labor. As such, we have had to implement measures to mitigate the negative impacts of inflation on our costs. As the selling prices in our customer contracts are fixed, any increase in the cost of materials, labor and other costs as we manufacture any system would negatively impact our gross margins and results of operations. Longstanding or increased periods of inflation could perpetuate these material adverse effects on our business, financial condition and results of operations.
If our critical suppliers fail to deliver enough quality materials and components in a timely and cost-effective manner, it could negatively affect our business.
We use numerous unrelated suppliers of materials and components. Due to geopolitical developments across Europe and Asia, we are experiencing reduced availability of raw materials and components. In turn, any reduction in the availability of these materials and components may reduce our ability to obtain sufficient amounts in a cost-effective manner. We generally do not have guaranteed supply arrangements with our suppliers. Because of the variability and uniqueness of our customer’s orders, we try to avoid maintaining an extensive inventory of materials and components for manufacturing. While we are not dependent on any principal or major supplier for most of our material and component needs, switching to an alternative supplier may take significant amounts of time and added expense, which could result in a disruption of our operations and adversely affect our business. It is not always practical or even possible to ensure that component parts are available from multiple suppliers; accordingly, we procure some key parts from a single supplier or a limited group of suppliers. At certain times, increases in demand for capital equipment can result in longer lead-times for many important system components, which may cause delays in meeting shipments to our customers. The delay in the shipment of even a few systems could cause significant variations in our quarterly revenue, operating results and the market value of our common stock.
| 21 |
Our manufacturing facilities in Central Islip, New York and Saugerties, New York could be affected due to multiple weather risks, including risks to our Central Islip facility from hurricanes and similar phenomena.
Our manufacturing facilities are in Central Islip, New York and Saugerties, New York and could be affected by multiple weather risks, most notably hurricanes for our Central Islip facility which is located on Long Island, New York. Although we carry property and casualty insurance and business interruption insurance, future possible disruptions of operations or damage to property, plant and equipment due to hurricanes or other weather risks could result in impaired production and affect our ability to meet our commitments to our customers and impair important business relationships, the loss of which could adversely affect our operations and profitability. We do, however, maintain a backup power source at our Central Islip facility.
Risks related to cybersecurity, intellectual property and regulatory compliance
If we are subject to cyberattacks, we could incur substantial costs and, if such attacks are successful, we could incur significant liabilities, reputational harm, and disruption to our operations.
We manage, store, and transmit proprietary information and sensitive data relating to our operations. We may be subject to breaches of the information technology systems we use for these purposes. Experienced computer programmers and hackers may be able to penetrate our network security and misappropriate and/or compromise our confidential information (and or third-party confidential information), create system disruptions, or cause shutdowns. Computer programmers and hackers also may be able to develop and deploy viruses, worms, and other malicious software programs that attack our systems or our products, or that otherwise exploit any security vulnerabilities.
While we have an active security training program for all employees during the year, utilize intrusion prevention and detection systems, as well as hardware firewall and virus security, the costs to address the foregoing security problems and security vulnerabilities before or after a cyber-incident could be significant. Our remediation efforts may not be successful and could result in interruptions, delays, or cessation of service, and loss of existing or potential customers, impeding our sales, manufacturing, distribution, or other critical functions. In addition, breaches of our security measures and the unapproved dissemination of proprietary information or sensitive data about us, our customer, or other third parties, could expose us, our customers, or other third parties to a risk of loss or misuse of this information, result in litigation and potential liability for us, damage our reputation, or otherwise harm our business.
| 22 |
Our financial position and results of operations may be materially harmed if we are unable to recoup our investment in research and development.
The rapid change in technology in our industry requires that we continue to make substantial investments in research and development and selective acquisitions of technologies and products, to enhance the performance and functionality of our product line, to keep pace with competitive products and to satisfy customer demands for improved performance, features and functionality. There can be no assurance that revenue from future products or enhancements will be sufficient to recover the development costs associated with such products, enhancements, or acquisitions, or that we will be able to secure the financial resources necessary to fund future research and development or acquisitions. Research and development costs are typically incurred before we confirm the technical feasibility and commercial viability of a product, and not all development activities result in commercially viable products. In addition, we cannot ensure that products or enhancements will receive market acceptance, or that we will be able to sell these products at prices that are favorable to us. Our business could be seriously harmed if we are unable to sell our products at favorable prices, or if our products are not accepted by the markets in which we operate.
We have made investments in our proprietary technologies. If third parties violate our proprietary rights, or accuse us of infringing upon their proprietary rights, such events could result in a loss of value of some of our intellectual property or costly litigation.
We attempt to protect certain of our intellectual property rights by obtaining patent and trademark protection where we believe it is appropriate to do so. While patent, copyright and trademark protection for our intellectual property may be important, we believe our future success in highly dynamic markets is most dependent upon the technical competence and creative skills of our personnel. We may also attempt to protect our trade secrets and other proprietary information through confidentiality agreements with our customers, suppliers, employees, and consultants, and through other internal security measures. However, these employees, consultants and third parties may breach these agreements, and we may not have adequate remedies for wrongdoing. In addition, the laws of certain territories in which we sell our products may not protect our intellectual property rights to the same extent as do the laws of the United States.
Occasionally, we may receive communications from other parties asserting the existence of patent rights or other intellectual property rights that they believe cover certain of our products, processes, technologies, or information. In addition, it is possible we could have a dispute with a customer concerning the use of intellectual property utilized in their equipment. If such cases arise, we will evaluate our position and consider the available alternatives, which may include seeking licenses to use the technology in question on commercially reasonable terms, developing new alternative technology or defending our position. Nevertheless, we cannot ensure that we will be able to obtain licenses, or, if we are able to obtain licenses, which related terms will be acceptable, or that litigation or other administrative proceedings will not occur. Defending our intellectual property rights through litigation could be very costly. If we are not able to negotiate the necessary licenses on commercially reasonable terms or successfully defend our position, our ability to utilize such intellectual property could substantially inhibit our access to certain markets and our ability to compete in these markets which could have a material adverse effect on our financial position and results of operations.
| 23 |
We may be unable to obtain required export licenses for the sale of our products.
Whether with respect to sales to customers located in China or otherwise, products which (i) are manufactured in the United States, (ii) incorporate controlled U.S. origin parts, technology, or software, or (iii) are based on U.S. technology, are subject to the U.S. Export Administration Regulations (“EAR”) when exported to and re-exported from international jurisdictions, in addition to the local jurisdiction’s export regulations applicable to individual shipments. Licenses or proper license exceptions may be required for the shipment of our products to certain customers or countries. Obtaining an export license or determining whether an export license exception exists often requires considerable effort by us and cooperation from the customer, which can add time to the order fulfillment process. We may be unable to obtain required export licenses or qualify for export license exceptions and, as a result, we may be unable to export products to our customers and/or meet their servicing needs. Non-compliance with the EAR or other applicable export regulations could result in a wide range of penalties including the denial of export privileges, fines, criminal penalties, and the seizure of commodities. If an export regulatory body determines that any of our shipments violate applicable export regulations, we could be fined significant sums and our export capabilities could be restricted, which could have a material adverse impact on our business.
Failure to comply with the United States Foreign Corrupt Practices Act could subject us to penalties and other adverse consequences.
We are subject to the United States Foreign Corrupt Practices Act, which generally prohibits United States companies from engaging in bribery or other prohibited payments to foreign officials for the purpose of obtaining or retaining business. We have agreements with third parties and make sales in countries known to experience corruption, extortion, bribery, pay-offs, theft, and other fraudulent practices. If our employees or other agents are found to have engaged in such practices, we could suffer severe penalties and other consequences that may have a material adverse effect on our business, financial condition, and results of operations.
We are subject to environmental regulations, and our inability or failure to comply with these regulations could adversely affect our business.
We are subject to environmental regulations in connection with our business operations, including regulations related to the development and manufacture of our products and our customers’ use of our products. Our failure or inability to comply with existing or future environmental regulations could result in significant remediation liabilities, the imposition of fines or the suspension or termination of development, manufacturing, or use of certain of our products, or affect the operation of our facilities, use or value of our real property, each of which could damage our financial position and results of operations.
| 24 |
Regulations related to conflict minerals will force us to incur additional expenses, may make our supply chains more complex, and may result in damage to our relationships with customers.
Under the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, or the Dodd-Frank Act, the SEC adopted requirements for companies that manufacture products that contain certain minerals and metals known as “conflict minerals”. These rules require public companies to perform diligence and to report annually to the SEC whether such minerals originate from the Democratic Republic of Congo and adjoining countries. The implementation of these requirements could adversely affect the sourcing, availability, and pricing of minerals we use in the manufacture of our products. In addition, we have incurred and will continue to incur additional costs to comply with the disclosure requirements, including costs related to determining the source of any of the relevant minerals used in our products. Given the complexity of our supply chain, we may not be able to ascertain the origins of these minerals used in our products through the due diligence procedures that we implement, which may harm our reputation. We may also face difficulties in satisfying customers who may require that our products be certified as conflict mineral free, which could harm our relationships with these customers and lead to a loss of revenue. These requirements could limit the pool of suppliers that can provide conflict-free minerals, and we may be unable to obtain conflict-free minerals at competitive prices, which could increase our costs and adversely affect our manufacturing operations and our profitability.
Risks related to financial and accounting matters
Cyclical demand for our products may make it difficult for us to accurately budget our expense levels, which are based in part on our projections of future revenues.
Historically, demand for our equipment and related consumable products have been volatile because of changes in supply and demand, and other factors in the manufacturing process. Our orders tend to be more volatile than our revenue, as any change in demand is reflected immediately in orders booked, which are net of cancellations, while revenue, tends to be recognized over multiple quarters because of procurement and production lead times, and the deferral of certain revenue under our revenue recognition policies. The fiscal period in which we can recognize revenue is also at times subject to the length of time that our customers require to evaluate the performance of our equipment. This could cause our quarterly operating results to fluctuate.
When cyclical fluctuations result in lower-than-expected revenue levels, operating results have been and may continue to be materially adversely affected and cost reduction measures have been and may continue to be necessary for us to remain competitive and financially sound. During a down cycle, we must be able to make timely adjustments to our cost and expense structure to correspond to the prevailing market conditions. In addition, during periods of rapid growth, we must be able to increase manufacturing capacity and the number of our personnel to meet customer demand, which may require additional liquidity. We can provide no assurance, that these objectives can be met in a timely manner in response to changes within the industry cycles in which we operate. If we fail to respond to these cyclical changes, our business could be seriously harmed.
| 25 |
We do not have long-term volume production contracts with our customers, and we do not control the timing or volume of orders placed by our customers. Whether and to what extent our customers place orders for any specific products, and the mix and quantities of products included in those orders are factors beyond our control. Insufficient orders would result in under-utilization of our manufacturing facilities and infrastructure and will negatively affect our financial position and results of operations.
We might require additional financing.
Our continuing operating losses may make it difficult for us to obtain financing on commercially reasonable terms, if at all. If adequate financing is not available when required on commercially reasonable terms, if at all, our business and operations may be materially and adversely affected. In addition, we could issue additional common stock, to fund our growth initiatives and operations which could materially dilute the ownership interests of the then existing shareholders.
We may, in the future, identify deficiencies in controls over financial reporting.
While we have concluded that, as of December 31, 2024, our disclosure and reporting controls were effective as included in Part II, Item 9A, there can be no assurance that material weaknesses will not be identified in the future. If we do identify material weaknesses in our internal controls over financial reporting in the future, our ability to analyze, record and report financial information free of material misstatements, and to prepare our financial statements within the time periods specified by the rules and forms of the SEC, may likely be adversely affected.
We have and may continue to be required to take impairment charges on assets.
We are required to assess our long-lived assets, consisting of our property, plant and equipment, for recoverability and impairment whenever there are indicators or impairment, such as an adverse change in business climate.
As part of our long-term strategy, we have pursued acquisitions of other companies or assets, and may pursue future acquisitions of other companies or assets which could potentially increase our assets. Adverse changes in business conditions could materially impact our estimates of future operations and result in impairment charges to these assets. If our assets were impaired, our financial condition and results of operations could be materially and adversely affected.
Acquisitions can result in an increase in our operating costs, divert management’s attention away from other operational matters and expose us to other associated risks.
We evaluate potential acquisitions of businesses and technologies, and we consider targeted acquisitions that expand our core competencies to be an important part of our future growth strategy. In the past, we have made acquisitions of other businesses with synergistic products, services and technologies, and plan to continue to do so in the future.
| 26 |
Acquisitions involve numerous risks, which include but are not limited to:
| ● | difficulties and increased costs in connection with the integration of the personnel, operations, technologies, services and products of the acquired companies into our existing facilities and operations; | |
| ● | diversion of management’s attention from other operational matters; | |
| ● | failure to commercialize the acquired technology; | |
| ● | the potential loss of key employees of the acquired companies; | |
| ● | lack of synergy, or inability to realize expected synergies, resulting from the acquisitions; | |
| ● | the risk that the issuance of our common stock, if any, in an acquisition or merger could be dilutive to our shareholders; | |
| ● | the inability to obtain and protect intellectual property rights in key technologies; and | |
| ● | the acquired assets becoming impaired as a result of technological advancements or worse-than-expected performance of the acquired assets. |
Risks related to product liability
We face the risk of product liability claims.
The manufacture and sale of our products, which in operation sometimes involve the use of toxic materials and extreme temperatures and could result in product liability claims. For example, our rapid thermal processing systems used to heat semiconductor materials to temperatures more than 1000º Celsius have certain inherent risks. A failure of our products at a customer site could also result in losses due to interruption of the business operations of our customer. While we regularly evaluate the nature and limits of our insurance coverages, there can be no assurance that our existing policies of insurance will be adequate to protect us from all liabilities that we might incur in connection with the manufacture and sale of our products in the event of a successful product liability claim or series of successful claims against us.
The health and environmental effects of nanotechnology are unknown, and this uncertainty could adversely affect the expansion of our business.
The health and environmental effects of nanotechnology are unknown. There is no scientific agreement on the health effects of nanomaterials in general and carbon nanotubes but some scientists believe that in some cases, nanomaterials may be hazardous to an individual’s health or to the environment.
The science of nanotechnology is based on arranging atoms in such a way as to modify or build materials not made in nature; therefore, the effects are unknown. Future research into the effects of nanomaterials in general, and carbon nanotubes, on health and environmental issues, may have an adverse effect on products incorporating nanotechnology. Since part of our growth strategy is based on sales of research equipment to produce carbon nanotubes and the sale of such materials, the determination that these materials are harmful could adversely affect the expansion of our business.
| 27 |
Risk related to our stock
The price of our common shares is volatile and could decline significantly.
The stock market in general and the market for technology stocks has experienced volatility. If those industry-based market fluctuations continue, the trading price of our common shares could decline significantly independent of the overall market, and shareholders could lose all or a substantial part of their investment. The market price of our common shares could fluctuate significantly in response to several factors, including, among others:
| ● | difficult macroeconomic conditions, unfavorable geopolitical events, and general stock market uncertainties, such as those occasioned by a global liquidity crisis and a failure of large financial institutions; | |
| ● | an offering of our common shares to raise capital; | |
| ● | receipt of large orders or cancellations of orders for our products; | |
| ● | issues associated with the performance and reliability of our products; | |
| ● | actual or anticipated variations in our results of operations; | |
| ● | announcements of financial developments or technological innovations; | |
| ● | changes in recommendations and/or financial estimates by investment research analysis; | |
| ● | strategic transactions, such as acquisitions, divestitures, or spin-offs; | |
| ● | offerings of our securities; | |
| ● | the occurrence of major catastrophic events; and | |
| ● | volatile trading volumes. |
Significant price and value fluctuations have occurred with respect to our publicly traded securities and those of technology companies generally. The price of our common shares is likely to be volatile in the future. In the past, securities class action litigation often has been brought against a company following periods of volatility in the market price of its securities. If similar litigation were pursued against us, it could result in substantial costs and a diversion of management’s attention and resources, which could materially and adversely affect our financial condition, results of operations, and liquidity.
General risks
Our success is highly dependent on the technical, sales, marketing and managerial contributions of key individuals, including our Chief Executive Officer and President, and we may be unable to retain these individuals or recruit others.
We depend on our senior executives including our Chief Executive Officer and President, and certain key managers as well as, engineering, research and development, sales, marketing and manufacturing personnel, who are critical to our business. Except for our Chief Executive Officer and President, we do not have employment agreements with our key employees. Furthermore, the current labor market remains very competitive and challenging for the acquisition and retention of key employees. Larger competitors may be able to offer more generous compensation packages to our executives and key employees, and therefore we risk losing key personnel to those competitors. If we were to lose the services of any of our key personnel, our engineering, product development, manufacturing and sales efforts could be slowed. We may also incur increased operating expenses and be required to divert the attention of our senior executives to search for their replacements. The integration of any new personnel could disrupt our ongoing operations.
We may not be able to hire or retain the number of qualified personnel, particularly engineering personnel, required for our business, which would harm the development and sales of our products and limit our ability to grow.
Competition in our industry for senior management, technical, sales, marketing and other key personnel is intense and has been made even more challenging in the current labor market. If we are unable to retain our existing personnel, or attract and train additional qualified personnel, our growth may be limited due to a lack of capacity to develop and market our products.
We have, from time to time, had trouble in hiring and retaining skilled engineers with appropriate qualifications to support our growth strategy. Our success depends on our ability to identify, hire, train and retain qualified engineering personnel with experience in equipment design. Specifically, we need to continue to attract and retain mechanical, electrical, software and field service engineers to work with our direct sales force to technically qualify and perform on new sales opportunities and orders, and to demonstrate our products.
| 28 |
| Item 1B. | Unresolved Staff Comments |
None.
| Item 1C. | Cybersecurity |
To manage our material risks from cybersecurity threats and to protect against, detect, and prepare to respond to cybersecurity incidents, we undertake the below listed activities:
| ● | Monitor emerging data protection laws and implement changes to our compliance processes; | |
| ● | Conduct periodic cybersecurity assessments for employees who use our system to evaluate training needs; | |
| ● | Conduct onboarding and cyber security training for all employees on an ongoing basis; | |
| ● | Conduct regular phishing email simulations for all employees; and | |
| ● | Carry cybersecurity risk insurance that protects against the potential losses from a cybersecurity incident. |
Our
incident response plan coordinates the activities that we and our
We decide whether and how risks from cybersecurity threats have or are reasonably likely to affect our financial position, results of operations, and cash flows under the heading “Risk related to cybersecurity, intellectual property and regulatory compliance,” which is included as part of Item 1A. Risk Factors of this Annual Report on Form 10-K, which disclosures are incorporated by reference herein.
| Item 2. | Properties |
Our corporate headquarters, research and development, manufacturing and process coating facilities as of December 31, 2024 are as follows:
| Owned Locations | Size (sf) | Segment | Mortgage/Loan | Principal use | ||||
| Central Islip, NY | 128,000 | CVD Equipment / MesoScribe | No | Corporate headquarters; R&D; Manufacturing | ||||
| Saugerties, NY | 22,000 | SDC | No | Manufacturing; Administration |
| Item 3. | Legal Proceedings. |
Not applicable.
| Item 4. | Mine Safety Disclosures. |
Not applicable.
| 29 |
PART II
| Item 5. | Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities |
Market Information for Common Stock
Our common stock is traded on the NASDAQ Capital Market under the symbol “CVV”.
Dividend Policy
We have never paid dividends on our common stock, and we do not anticipate paying dividends on common stock at the present time. We currently intend to retain earnings, if any, for use in our business. There can be no assurance that we will ever pay dividends on our common stock. Our dividend policy with respect to our common stock is within the discretion of the Board of Directors and its policy with respect to dividends in the future will depend on numerous factors, including earnings, financial requirements, and general business conditions.
Stockholders
As of March 18, 2025, there were approximately 55 holders of record and approximately 3,544 beneficial owners of our common stock.
Recent Sales of Unregistered Securities
None.
Issuer Purchases of Equity Securities
None.
| Item 6. | Reserved. |
| 30 |
| Item 7. | Management’s Discussion and Analysis of Financial Condition and Results of Operations. |
You should read the following discussion and analysis in conjunction with our consolidated financial statements and related notes contained elsewhere in this report. This discussion contains forward-looking statements that involve risks, uncertainties and assumptions. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of a variety of factors discussed in this report and those discussed in other documents we file with the SEC. In light of these risks, uncertainties and assumptions, readers are cautioned not to place undue reliance on such forward-looking statements. These forward-looking statements represent beliefs and assumptions as of the date of this report. While we may elect to update forward-looking statements at some point in the future, we specifically disclaim any obligation to do so, even if our estimates change. Past performance does not guarantee future results.
Executive Summary
We have served the advanced materials markets with chemical vapor and thermal process equipment for over 40 years. CVD designs, develops, and manufactures a broad range of chemical vapor deposition, gas control, and other state-of-the-art equipment and process solutions used to develop and manufacture materials and coatings for industrial applications and research.
During 2024:
| ● | Revenue increased by $2.8 million or 11.5% as compared to the prior year due to increases in revenues from aerospace and industrial contracts in progress and our SDC segment that was partially offset by lower revenues of spare parts and lower revenues from Tantaline that was sold in May 2023. | |
| ● | Gross margin increased by $1.3 million or 24.8% as compared to the prior year due to higher revenues and improved margins on contracts in process offset by a $1.3 million non-cash charge to reduce certain PVT inventory to net realizable value. | |
| ● | Total bookings for 2024 were approximately $28.1 million as compared to $25.8 million in 2023, an increase of $2.3 million or 8.9%. | |
| ● | Bookings in 2024 included a $10.0 million multisystem order from an industrial customer that will be used to deposit a silicon carbide protective coating on OEM components. | |
| ● | Bookings in 2024 also included a $3.5 million order from a major aerospace company for the production of CVI systems. This is the fifth system purchased by this customer that will be used by our customer to manufacture CMCs for their gas turbine jet engines. | |
| ● | Our backlog increased from $18.4 million to $19.4 million, an increase of $0.8 million or 4.9%. | |
| ● | Cash balance at December 31, 2024 was $12.6 million as compared to $14.0 million at December 31, 2023 |
| 31 |
Business Update
Our core strategy is to focus on growth end markets in applications related to aerospace, microelectronics including markets related to the “electrification of everything,” and industrial applications. With respect to aerospace, our systems are being used by our customers to produce ceramic matrix composite materials (“CMCs”) that will be used in next generation gas turbine jet engines with the objective of reducing jet fuel consumption and to produce specialty coatings for advanced high temperature environments.
The phrase “electrification of everything” refers to the shift from fossil fuels to the use of electricity to power devices, buildings, electric vehicles (“EVs”), and many other applications.
Our current strategy yielded multisystem orders of PVT150 equipment in 2023 and 2022 that were delivered to one company that planned to use our systems to manufacture silicon carbide wafers. Although we continue to invest in our vision for the “electrification of everything,” we have observed lower-than-anticipated industrywide electric vehicle sales which may reduce demand for silicon carbide and impact sales of our PVT systems. In addition, the current global over capacity of 150 mm silicon carbide wafers has reduced the market for 150 mm silicon carbide growth systems.
In February 2024, we received an order from an additional customer for our new PVT200 system used to grow silicon carbide crystals for the manufacture of 200 mm wafers. This represents our second customer for our PVT equipment. This customer plans to evaluate our equipment for potential additional purchases of PVT equipment. We shipped this unit to the customer in the third quarter of 2024.
Both technologies are essential for the support of the EV market. These systems should provide us with standard product offerings to continue to support the EV focused market as well as energy storage, power conversion and power transmission. We plan to evaluate opportunities to expand our product offerings in the power electronics market to build off the introduction of the PVT150 and PVT200 systems. We are also evaluating our ability to provide other equipment used in the manufacturing process of silicon carbide wafers.
During 2022, we also received an order from an aerospace company for a production chemical vapor infiltration (CVI) system that will be used to manufacture CMCs for gas turbine jet engines. In 2023, we received an order from the same aerospace company for an additional three CVI systems and in November 2024 we received an order from the same aerospace company for an additional CVI system.
In February 2024, we received a multisystem order from an industrial customer for approximately $10.0 million that will be used for depositing a silicon carbide protective coating on OEM components and the units are expected to be delivered over 18 to 24 months period.
We have generally gained new customers through our industry reputation, as well as print advertising and trade show attendance. We have increased the number of trade shows and industry conferences we attend.
Historically, our orders have fluctuated based on end user market conditions, adoption of our new products and acceptance of our products. The order rate as well as other factors in our manufacturing process ultimately impacts the timing of revenue recognition, whether accounted for over time or at a point in time. Accordingly, orders received from customers and the corresponding revenue recognized may fluctuate from quarter to quarter. The sales cycle for our equipment is typically six months, but can range up to twelve to eighteen months, depending on the application and product stage of the equipment. The order cycle to manufacture and test a system also will vary from six to eighteen months for our CVD Equipment segment and two to twelve months for our SDC segment, depending on system complexity and magnitude of the system.
| 32 |
Results of Operations
Years Ended December 31, 2024 and 2023
The following table presents revenue and expense line items reported in our Consolidated Statements of Operations for the years ended December 31, 2024, and 2023 and the period-over-period dollar and percentage changes for those line items (in thousands, except percentages).
| December 31, 2024 | December 31, 2023 | Change | Percent | |||||||||||||
| Revenue | $ | 26,876 | $ | 24,109 | $ | 2,767 | 11.5 | % | ||||||||
| Cost of revenue | 20,545 | 19,038 | 1,507 | 7.9 | % | |||||||||||
| Gross profit | 6,331 | 5,071 | 1,260 | 24.8 | % | |||||||||||
| Operating expenses | ||||||||||||||||
| Research and development | 2,627 | 2,596 | 31 | 1.2 | % | |||||||||||
| Selling | 1,656 | 1,632 | 24 | 1.5 | % | |||||||||||
| General and administrative | 5,181 | 5,451 | (270 | ) | (5.0 | %) | ||||||||||
| Gain on sales of equipment | (717 | ) | - | (717 | ) | * | ||||||||||
| Loss on disposition of Tantaline | - | 162 | (162 | ) | * | |||||||||||
| Impairment charge | - | 111 | (111 | ) | * | |||||||||||
| Total operating expenses | 8,747 | 9,952 | (1,205 | ) | (12.1 | %) | ||||||||||
| Operating loss | (2,416 | ) | (4,881 | ) | 2,465 | 50.5 | % | |||||||||
| Other income (expense): | ||||||||||||||||
| Interest income | 559 | 577 | (18 | ) | (3.1 | %) | ||||||||||
| Interest expense | (19 | ) | (23 | ) | 4 | (17.4 | %) | |||||||||
| Foreign exchange income | - | 42 | (42 | ) | * | |||||||||||
| Other income | 2 | 91 | (89 | ) | * | |||||||||||
| Total other income, net | 542 | 687 | (145 | ) | (21.1 | %) | ||||||||||
| Loss before income tax | (1,874 | ) | (4,194 | ) | 2,320 | (55.3 | %) | |||||||||
| Income tax expense (benefit) | 24 | (14 | ) | 38 | * | |||||||||||
| Net loss | $ | (1,898 | ) | $ | (4,180 | ) | $ | 2,282 | 54.6 | % | ||||||
* Not meaningful
| 33 |
Revenue
December 31, 2024 | December 31, 2023 | Change | Percent | |||||||||||||
| CVD Equipment | $ | 18,288 | $ | 16,334 | $ | 1,954 | 12.0 | % | ||||||||
| SDC | 8,444 | 7,139 | 1,305 | 18.3 | % | |||||||||||
| MesoScribe | 778 | 722 | 56 | 7.8 | % | |||||||||||
| Tantaline | - | 462 | (462 | ) | (100.0 | %) | ||||||||||
| Intersegment sales elimination | (634 | ) | (548 | ) | (86 | ) | 15.7 | % | ||||||||
| Total | $ | 26,876 | $ | 24,109 | $ | 2,767 | 11.5 | % | ||||||||
Our revenue for the year ended December 31, 2024 was $26.9 million compared to $24.1 million for the year ended December 31, 2023, an increase of $2.8 million or 11.5%.
The increase in revenue versus the prior year period was primarily attributable to higher revenue of $1.9 million from our CVD Equipment segment and a $1.3 million increase in revenue from our SDC segment, offset by lower Tantaline revenues of $0.5 million that was sold in May 2023. Revenue from one aerospace customer for the year ended December 31, 2024 represented 29.5% of our total revenues and 43.4% of CVD Equipment segment revenues.
The revenue contributed by our CVD Equipment segment for the year ended December 31, 2024 of $18.3 million represented 68.1% of overall revenue as compared to $16.2 million (net of intersegment sales of $0.1 million) or 67.8% of overall revenue for the year ended December 31, 2023. The increase in external revenues of $2.1 million or 11.3% resulted principally from increases in revenues from aerospace and industrial contracts in progress offset in part by lower revenue for PVT150/200 systems and spare parts.
The revenue contributed by our SDC segment for the year ended December 31, 2024 of $7.8 million (net of intersegment sales of $0.6 million) represented 29.1% of overall revenue as compared to $6.7 million (net of intersegment sales of $0.4 million) or 27.8% of overall revenue for the year ended December 31, 2023. External revenue for our SDC segment increased by $1.1 million or 16.4% due to higher demand for gas delivery system products as compared to the prior period.
The revenue contributed by our MesoScribe segment for the year ended December 31, 2024 of $0.8 represented 2.9% of our overall revenue as compared to $0.7 million or 3.0% of overall revenue for the year ended December 31, 2023. MesoScribe fulfilled its final orders during 2024 and ceased operations.
Our order backlog at December 31, 2024 was approximately $19.4 million as compared to December 31, 2023 of $18.4 million. Our order backlog at December 31, 2024 consists of approximately $17.4 million related to remaining performance obligations of contracts in progress and not yet started and the balance of approximately $1.9 million represents other orders received from customers. As of December 31, 2024, one industrial customer represented 41.8% of our backlog and one aerospace customer represented 27.1% of our backlog. Historically, our revenues and orders have fluctuated based on changes in order rate as well as other factors in our manufacturing process that impacts the timing of revenue recognition. Accordingly, orders received from customers and revenue recognized may fluctuate from quarter to quarter.
| 34 |
Gross Profit
Gross profit for the year ended December 31, 2024 amounted to $6.3 million, with a gross profit margin of 23.6%, compared to a gross profit of $5.1 million and a gross profit margin of 21.0% for the year ended December 31, 2023. The increase in gross profit of $1.3 million was primarily due to higher revenues as well as improved margins on CVD contracts in progress and final MesoScribe sales that was partially offset by a $1.3 million non-cash charge to reduce certain PVT inventory to net realizable value.
Research and Development
For the year ended December 31, 2024, research and development expenses were $2.6 million, or 9.8% of revenue as compared to $2.6 million, or 10.8% for the year ended December 31, 2023. There were no significant changes in research and development expenses as compared to the prior year.
General engineering support and expenses related to the development of more standard products and value-added development of existing products are reflected as part of research and development expense. General engineering support and expenses are charged to costs of goods sold when work is performed directly on a customer order.
Selling
Selling expenses were $1.7 million or 6.2% of the revenue for the year ended December 31, 2024 as compared to $1.6 million or 6.8% for the year ended December 31, 2023. There were no significant changes in selling expenses as compared to the prior year.
General and Administrative
General and administrative expenses for the year ended December 31, 2024 were $5.2 million or 19.3% of revenue compared to $5.4 million or 22.6% of revenue for the year ended December 31, 2023, a decrease of $0.3 million. The decrease in 2024 was due to lower employee compensation and lower professional fees.
Gain on Sales of Equipment
During 2024, we recognized a gain of $0.6 million on the sale of equipment related to MesoScribe representing the sale price of $0.8 million less the costs of the equipment sold of $0.2 million. We also recognized a gain of $42,000 on the sale of equipment by our CVD Equipment.
| 35 |
Loss on Disposition of Tantaline
This expense of $162,000 represents the net loss on the sale of our Tantaline subsidiary including professional fees. This disposition was completed in 2023.
Impairment Charge
This expense represents the loss on the impairment of certain assets of MesoScribe based on the decision to wind down its operations made in 2023.
Other Income, Net
Other income, net was $0.5 million for the year ended December 31, 2024 as compared to other income, net of $0.7 million for the year ended December 31, 2023. Other income is principally interest income on treasury bills.
Income Taxes
Income tax expense (benefit) for the years ended December 31, 2024 and 2023, was $24,000 and $(14,000) respectively. We continue to evaluate for potential utilization of our deferred tax asset, which has been fully reserved for, on a quarterly basis, by reviewing our economic models, including projections of future operating results.
Inflation and Supply Chain Matters
We experienced increased costs on certain materials and components as well as delays in supply chain delivery, which may also impact our ability to recognize revenue and reduce our gross profit margins, as well as extend our manufacturing lead times and reduce our manufacturing efficiencies. We have commenced placing orders with more lead time to help mitigate the manufacturing delays, as well as assessing other suppliers or components to attempt to mitigate the potential cost impacts. In addition, we are utilizing our in-house flexible manufacturing to attempt to further mitigate both potential schedule delivery delays and material cost increase. While we have initiated actions to mitigate the potential negative impacts to our revenue and profitability, there can be no assurance of the ultimate impact and the length of time that the supply chain factors may impact our revenues and profitability.
Inflation has also had an impact on salaries and compensation. To remain competitive in the acquisition and retention of our employees, we have reviewed and adjusted salaries and implemented bonus incentives to mitigate the potential negative impacts of inflation on our employees.
Any significant increases in tariffs on goods that we purchase could negatively affect our business and results of operations by increasing the cost to manufacture our products.
| 36 |
Liquidity and Capital Resources
As of December 31, 2024, we had aggregate working capital of $13.9 million compared to aggregate working capital of $14.3 million at December 31, 2023. Our cash and cash equivalents at December 31, 2024 and 2023 were $12.6 million and $14.0 million, respectively.
Net cash used in operating activities during 2024 was $1.5 million and was principally due to the net loss of $1.9 million and reductions in contract assets and liabilities of $2.4 million, offset by a reduction in inventory of $0.6 million, and non-cash items of $2.6 million including a provision for excess and obsolete inventory of $1.6 million.
Net cash provided by investing activities for the year ended December 31, 2024 consisted of proceeds from the sales of equipment of $0.2 million offset by capital expenditures of $0.1 million.
Net cash used in financing activities for the year ended December 31, 2024 consisted of repayments of $0.1 million for an equipment loan.
We believe that our cash and cash equivalent positions and our projected cash flow from operations will be sufficient to meet our working capital and capital expenditure requirements for the next twelve months from the filing of this Form 10-K. We will continue to assess our operations and take actions anticipated to maintain our operating cash to support the working capital needs.
Critical Accounting Estimates
Use of Estimates
This discussion and analysis of the Company’s financial condition and results of operations is based on the Company’s consolidated financial statements, which have been prepared in accordance with generally accepted accounting principles in the United States of America, or U.S. GAAP. The preparation of these financial statements requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities, disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the reported periods.
In accordance with U.S. GAAP, the Company bases its estimates on historical experience and on various other assumptions the Company believes are reasonable under the circumstances. Actual results may differ from these estimates under different assumptions or conditions.
We consider an accounting estimate to be critical if: (1) the accounting estimate requires us to make assumptions about matters that were highly uncertain at the time the accounting estimate was made, and (2) changes in the estimate that are reasonably likely to occur from period to period, or use of different estimates that we reasonably could have used in the current period, would have a material impact on our financial condition or results of operations.
| 37 |
We consider the following estimates within our significant accounting policies to be critical because of their complexity and the high degree of judgment involved in maintaining them. See Note 2 – “Summary of Significant Accounting Policies” of our Consolidated Financial Statements for additional information regarding our accounting policies
Revenue Recognition
We design, manufacture, and sell custom chemical vapor deposition equipment through contractual agreements. These system sales require us to deliver functioning equipment that is generally completed within two to eighteen months from commencement of order acceptance. We recognize revenue over time by using an input method based on costs incurred as it depicts our progress toward satisfaction of the performance obligation. Under this method, revenue arising from fixed price contracts is recognized as work is performed based on the ratio of costs incurred to date to the total estimated costs at completion of the performance obligations.
Incurred costs include all direct material and labor costs and those indirect costs related to contract performance, such as indirect labor, supplies, tools, repairs and depreciation costs. Contract material costs are included in incurred costs when the project materials have been purchased or moved to work-in-process as required by the project’s engineering design. Cost based input methods of revenue recognition require us to make estimates of costs to complete the projects. In making such estimates, significant judgment is required to evaluate assumptions related to the costs to complete the projects, including materials, labor, and other system costs. If the estimated total costs on any contract are greater than the net contract revenues, we recognize the entire estimated loss in the period the loss becomes known and can be reasonably estimated.
We have been engaged in the production and delivery of goods on a continual basis under contractual arrangements for many years. Historically, we have demonstrated an ability to accurately estimate total revenues and total expenses relating to our long-term contracts. However, there exist many inherent risks and uncertainties in estimating revenues, expenses and progress toward completion, particularly on larger or longer-term contracts. If we do not estimate the total sales, related costs, and progress toward completion on such contracts, the estimated gross margins may be significantly impacted, or losses may need to be recognized in future periods. Any such resulting changes in margins or contract losses could be material to our results of operations and financial condition.
Long-Lived Assets
Long-lived assets consist primarily of property, plant and equipment. Long-lived assets are reviewed for impairment whenever events or circumstances indicate their carrying value may not be recoverable. When such events or circumstances arise, an estimate of the future undiscounted cash flows produced by the asset, or the appropriate grouping of assets, is compared to the asset’s carrying value to determine if impairment exists pursuant to the requirements of ASC 360-10-35, “Impairment or Disposal of Long-Lived Assets.” If the asset is determined to be impaired, the impairment loss is measured on the excess of it carrying value over its fair value. Assets to be disposed of are reported at the lower of their carrying value or net realizable value. It is not possible for us to predict the likelihood of any possible future impairments or, if such an impairment were to occur, the magnitude of any impairment.
| 38 |
| Item 7A. | Quantitative and Qualitative Disclosures About Market Risk. |
Not applicable.
| Item 8. | Financial Statements and Supplementary Data. |
The consolidated financial statements required by this item are included in this Annual Report on Form 10-K beginning on page F-1.
| Item 9. | Changes in and Disagreements with Accountants on Accounting and Financial Disclosure. |
None.
| Item 9A. | Controls and Procedures. |
Disclosure Controls and Procedures. We maintain a system of disclosure controls and procedures (as defined in Rule 13a-15(e) and 13d-15(e) under the Exchange Act of 1934, as amended, (the “Exchange Act”)). As required by Rule 13a-15(b) under the Exchange Act, management of the Company, under the direction of our Chief Executive Officer and Chief Financial Officer, reviewed and performed an evaluation of the effectiveness of design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Exchange Act) as of December 31, 2024.
Based on that review and evaluation, our Chief Executive Officer and Chief Financial Officer, along with others in our management, have determined that as of the end of the period covered by this Report on Form 10-K, the disclosure controls and procedures were effective to provide reasonable assurance that such information is accumulated and communicated to our management, including our principal executive and financial officers, as appropriate to allow timely decisions regarding disclosures.
Changes in Internal Controls
There were no changes in our internal controls over financial reporting as defined in Rule 13a-15(f) or Rule 15d-15(f) under the Exchange Act that occurred during the most recent fiscal quarter that have materially affected, or are reasonably likely to materially affect, the internal controls over financial reporting.
Limitations on the Effectiveness of Controls
We believe that a control system, no matter how well designed and operated, cannot provide absolute assurance that the objectives of the control systems are met, and no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within a company have been detected.
| 39 |
Management’s Annual Report on Internal Control Over Financial Reporting. Our management is responsible for establishing and maintaining effective internal control over financial reporting (as defined in Rule 13a – 15(f) of the Exchange Act). There are inherent limitations to the effectiveness of any internal control, including the possibility of human error and the circumvention or overriding of controls. Accordingly, even effective internal controls can provide only reasonable assurance with respect to financial statement preparation. Further, because of changes in conditions, the effectiveness of internal control may vary over time. We have assessed the effectiveness of our internal controls over financial reporting (as defined in Rule 13a -15(f) of the Exchange Act) as of December 31, 2024. In making this assessment, we used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in “Internal Control – Integrated Framework (2013)”. Management concluded that, as of December 31, 2024, our internal control over financial reporting was effective based on the criteria established by the COSO Internal Control Framework.
This Annual Report on Form 10-K does not include an attestation report of our registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by our registered public accounting firm pursuant to the rules of the Securities and Exchange Commission that permit us to provide only management’s report in this Annual Report on Form 10-K.
| Item 9B. | Other Information. |
| Item 9C. | Disclosure Regarding Foreign Jurisdictions That Prevent Inspections. |
Not applicable.
PART III
| Item 10. | Directors, Executive Officers, and Corporate Governance. |
Background and Experience of Directors
When considering whether directors and nominees have the experience, qualifications, attributes or skills, taken as a whole, to enable the Board of Directors to satisfy its oversight responsibilities effectively in light of our business and structure, the Nominating, Governance and Compliance Committee focused primarily on each person’s background and experience as reflected in the information discussed in each of the directors’ individual biographies set forth immediately below. We believe that our directors provide an appropriate mix of experience and skills relevant to the size and nature of our business. As more specifically described in such person’s individual biographies set forth below, our directors possess relevant and industry-specific experience and knowledge in the engineering, financial and business fields, as the case may be, which we believe enhances the Board’s ability to oversee, evaluate and direct our overall corporate strategy. The Nominating, Governance and Compliance Committee annually reviews and makes recommendations to the Board regarding the composition and size of the Board so that the Board consists of members with the proper expertise, skills, attributes, and personal and professional backgrounds needed by the Board, consistent with applicable regulatory requirements.
| 40 |
The Nominating, Governance and Compliance Committee believes that all directors, including nominees, should possess the highest personal and professional ethics, integrity, and values, and be committed to representing the long-term interests of our shareholders. The Nominating, Governance and Compliance Committee will consider criteria including the nominee’s current or recent experience as a senior executive officer, whether the nominee is independent, as that term is defined in existing independence requirements of the NASDAQ Capital Market and the Securities and Exchange Commission, the business, scientific or engineering experience currently desired on the Board, geography, the nominee’s industry experience, and the nominee’s general ability to enhance the overall composition of the Board.
The Nominating, Governance and Compliance Committee does not have a formal policy on diversity, however, in recommending directors, the Board and the Committee consider the specific background and experience of the Board members and other personal attributes in an effort to provide a diverse mix of capabilities, contributions and viewpoints which the Board believes enables it to function effectively as the Board of Directors of a company with our size and the nature of our business.
The following table sets forth the names, ages and positions with the Company of each of our directors and executive officers, as of March 19, 2025.
| Name | Age | Position(s) with the Company | ||
| Emmanuel Lakios | 63 | Chief Executive Officer, President, Director | ||
| Lawrence J. Waldman | 78 | Chairman of the Board of Directors, Chairman-Audit Committee | ||
| Robert M. Brill | 78 | Director, Chairman – Nominating, Governance, and Compliance Committee | ||
| Ashraf Lotfi | 64 | Director, Chairman – Compensation Committee | ||
| Debra Wasser | 60 | Director | ||
| Andrew Africk | 58 | Director | ||
| Richard A. Catalano | 65 | Chief Financial Officer, Executive Vice President, Secretary and Treasurer | ||
| Kevin R. Collins | 59 | Vice President and General Manager of SDC | ||
| Jeffrey A. Brogan | 55 | Vice President of Sales and Marketing | ||
| Maxim S. Shatalov | 54 | Vice President of Engineering and Technology | ||
| Warren D. Cheesman | 52 | Vice President of Manufacturing Operations |
Emmanuel Lakios was appointed to serve as President and Chief Executive Officer of the Company on January 22, 2021, and on July 15, 2021 was elected by the shareholders as a member of the Board of Directors. Mr. Lakios joined the Company as Vice President Sales and Marketing in February 2017. Mr. Lakios has over 30 years of experience serving the aerospace, semiconductor, data storage and optical device industries and is the holder of several patents in the field of process equipment and device structure. From January 2015 through February 2017, Mr. Lakios was the President and Chief Executive Officer at Sensor Electronic Technology, Inc., overseeing that company’s transition from R&D to a leading global commercial UV LED supplier. From 2003 to 2011 he was the Executive Vice President of Field Operations and President and Chief Operating Officer at Imago Scientific, bringing it from pre-revenue to a commercial leadership position in the 3D atomic scale tomography field. Mr. Lakios was previously employed at Veeco Instruments Inc. from 1984 until 2003, where he held several positions, including President of the Process Equipment Group and Executive Vice President of Field Operations. He has been involved in several acquisitions and numerous product line launches. He received his BE in Mechanical Engineering with focus in Material Science from SUNY Stony Brook in 1984.
| 41 |
Lawrence J. Waldman was appointed a member of the Board of Directors on October 5, 2016 and currently serves as Chairman of the Board and Chairman of the Audit Committee. Mr. Waldman has over 40 years of experience in public accounting.
Mr. Waldman is a member of the board of directors of Comtech Telecommunications Corporation since August 2015 and Lead Independent Director from December 2021 through March 2024. He serves as the chairperson of Comtech’s Audit Committee. Mr. Waldman is a member of the board of directors and Lead Independent Director and Audit Committee Chairperson at APYX Medical Corporation, a Nasdaq-listed advanced energy medical technology company. Mr. Waldman serves as a Senior Advisor at First Long Island Investors, LLC since 2016 and was previously an Advisor to the accounting firm of EisnerAmper LLP following his role as Partner-in-Charge of Commercial Audit Practice Development for Long Island. Mr. Waldman served as the Managing Partner of the Long Island office of KPMG LLP from 1994 through 2006, the accounting firm where he began his career in 1972. During his tenure at KPMG, Mr. Waldman served as audit partner to a number of public and privately held technology companies.
Mr. Waldman is currently Chairman of the Board of Directors of the Long Island Association and a member of the boards of directors of the Long Island Angel Network and the Advanced Energy Research Center at Stony Brook University. Through October 21, 2018, Mr. Waldman was a member of the board of directors of Northstar/RXR Metro Income, Inc., an SEC registered non-traded real estate investment trust.
Mr. Waldman was Chairman of the Supervisory Committee of Bethpage Federal Credit Union and previously served as the Chairman of the Audit Committee of the State University of New York’s (“SUNY”) Board of Trustees, the largest state university system in the United States. Mr. Waldman previously served as Chairman of the Audit and Finance Committee Board of Trustees of the Long Island Power Authority (“LIPA”), the second largest government utility in the United States, and as the Chairman of the Board. Mr. Waldman also served as an adjunct professor at Hofstra University, teaching graduate courses in advanced accounting theory and advanced auditing. Mr. Waldman is a certified public accountant in New York State. He is a member of the American Institute of Certified Public Accountants and the New York State Society of CPAs. Mr. Waldman holds a Bachelor of Science and a Master of Business Administration from Hofstra University in Hempstead, New York.
Mr. Waldman qualifies to serve as a director, Audit Committee Chairman and Lead Independent Director because of his significant experience leading public company boards, his extensive relevant industry and financial and accounting expertise.
| 42 |
Dr. Robert M. Brill was appointed a Director of the Company on March 5, 2021. Dr. Brill was co-founder and managing partner of Newlight Management from 1997 to 2019, which managed venture capital funds that focused on early-stage technology companies. Prior to co-founding Newlight, Dr. Brill was a general partner of Poly Ventures, a Long Island based venture capital fund. Dr. Brill is a member of the Board of Directors of the Long Island Angel Network and one private company. Dr. Brill has also previously served on the Board of Directors of multiple public and private companies. Dr. Brill has been the CEO of both public and private companies. Dr. Brill served as General Manager of Harris Corporation’s CMOS Semiconductor Division. He also held various technical and management positions at IBM’s semiconductor operation. Dr. Brill holds a Ph.D. in nuclear physics from Brown University and a B.A. and a B.S. in Engineering Physics from Lehigh University. Dr. Brill had previously served on the Company’s Board from April 2018 until October 2019.
Dr. Ashraf Lotfi is currently a venture partner with Deep Sciences Ventures and serves on the board of Lotus Microsystems, ApS, Xonia Ltd., HyperCIM Ltd. Dr. Lotfi previously served as Vice President and a Fellow at Intel Corporation. Prior to Intel, he was Power Chief Technology Officer for Altera Corporation serving its Enpirion Power Business as well as the broader Field Programmable Gate Array community. Altera was acquired by Intel in 2015. Prior to Altera, he served as President and Chief Executive Officer of Enpirion, Inc., which he founded in 2002.
From Enpirion’s inception, Dr. Lotfi led its strategic direction with a unique industry-first vision to create the ultimate power converter-on-chip creating ubiquitous DC-DC conversion at the silicon level. In 2013, he led Enpirion’s merger into Altera to realize his vision of highly integrated power management closely coupled to leading-edge digital silicon loads. Prior to founding Enpirion, he was Director of Advanced Power Research at Bell Laboratories.
Dr. Lotfi has a B.S. in Electrical Engineering from Cairo University and an M.S. and PhD. in Electrical Engineering from Virginia Tech.
Dr. Lotfi currently serves on the boards of Lotus Microsystems ApS, Xonai Ltd., HyperCIM Ltd. and his extensive experience in high power electronics provide a valuable resource to the Board of Directors and Executive Management.
Debra Wasser was elected as a member of the Board of Directors on July 13, 2023. Ms. Wasser currently serves as Vice President of Investor Relations for Etsy, Inc. (Nasdaq: ETSY), the global marketplace for unique and creative goods. She is responsible for Etsy’s external shareholder relationships, with a focus on corporate and financial reporting, driving increased analyst coverage and investor connectivity, effective corporate messaging, strategic investor targeting, and governance engagement with the financial community. Ms. Wasser has led investor and broad internal and external communications strategies on multiple financial transactions and offerings, and a host of product and technology launches and marketing initiatives.
Prior to joining Etsy in April 2018, Ms. Wasser led Edelman’s Investor Relations practice in the U.S. and advised boards of directors and senior managements of public companies on strategic communications including investor relations, financial and corporate public relations, transaction communications, crisis communications and leadership positioning.
| 43 |
Prior to joining Edelman in 2015, Ms. Wasser was Senior Vice President, Investor Relations & Corporate Communications for semiconductor equipment provider Veeco Instruments, Inc. (Nasdaq: VECO) for over 15 years. While at Veeco, Ms. Wasser created and implemented a global investor relations program to raise visibility and deepen ownership to reflect business trends. She led effective communications strategy through positive periods of growth, over a dozen merger and acquisition transactions, a highly successful secondary equity offering, and new market opportunities.
Prior to joining Veeco, Ms. Wasser was Vice President of Dewe Rogerson Inc. where she ran the firm’s U.S. investor relations client base, focused on healthcare/biotech, high-tech, consumer products, financial services, publishing, and general industry. During her tenure at the firm, Ms. Wasser serviced clients across the globe and helped grow the firm from four to 80 employees. Deb has a B.S. in Communications and Business from The State University of New York at Albany.
Ms. Wasser has provided business and communications advice to Boards of Directors of publicly traded and privately held companies for over three decades. She has served on the Board of Directors of NIRI, the Association of Investor Relations Professionals, including the maximum service of four years on the National Chapter Board, as well as earlier as a Board member of the organizations New York Chapter.
Andrew Africk was appointed as a member of the Board of Directors on May 28, 2024. Mr. Africk is the founder of Searay Capital LLC, a private investment company. Mr. Africk established Searay Capital in July 2013 after 21 years leading private equity and capital markets investments for Apollo Global Management. As a Senior Partner at Apollo, Mr. Africk was responsible for investments in technology and communications, and he has 30 years of experience financing, analyzing and investing in public and private companies. In the last five years, Mr. Africk has served on the board of directors of ADT Inc., which provides residential and commercial security systems and services. Additionally, Mr. Africk serves on the Board of Advisors of the University of Pennsylvania School of Engineering and Applied Science. Mr. Africk graduated from UCLA with a B.A. in Economics, from the University of Pennsylvania Law School with a J.D., and from the University of Pennsylvania’s Wharton School of Business with an MBA.
Mr. Africk has extensive board experience including previously serving on the board of directors of ADT Inc., and numerous boards of technology companies while a Senior Partner at Apollo.
Richard A. Catalano was appointed as the Company’s Vice President and Chief Financial Officer effective as of August 30, 2022. Mr. Catalano began his career at KPMG LLP and became an audit partner in 1993. Throughout his over 35 years as an audit professional at KPMG LLP, Mr. Catalano advised a diverse array of clients through private equity financed transactions, merger-related accounting, and filings with the U.S. Securities and Exchange Commission. Towards the later part of his tenure, Mr. Catalano served as the leader of KPMG LLP’s Metro New York Healthcare and Life Sciences Practice and then co-led KPMG’s Global Audit Methodology Group. Mr. Catalano is a Certified Public Accountant in New York State and received a Bachelor of Business Administration in accounting from Hofstra University.
| 44 |
Kevin R. Collins is the Vice President and General Manager of SDC, Mr. Collins served as the General Manager of SDC since 1999. From 1990 to 1999 he was employed by Stainless Design Corp. as Manager of Field Operations and Product Development Advisor. Mr. Collins attended Columbia University School of Engineering and Applied Science.
Dr. Jeffrey Brogan was appointed as Vice President Sales and Marketing for the Company on March 23, 2021. Previously he was Director of Sales and Marketing for CVD Materials Corporation since November 2017 with General Management responsibilities of CVD MesoScribe Technologies Corporation. Dr. Brogan served as the President and CEO of MesoScribe Technologies, Inc., spearheading its sale to CVD in 2017. He has over 25 years of experience serving aerospace and defense industries with expertise in strategic sales & marketing, technology management, and advanced Research & Development. He received his PhD in Materials Science and Engineering from Stony Brook University in 1996.
Dr. Maxim S. Shatalov was appointed Vice President of Engineering and Technology in April 2018. Prior to CVD, Mr. Shatalov was employed by Sensor Electronic Technology Inc. (SETi) a LED company where he held multiple technical and management positions from 2006 through 2018. In 2017, Dr. Shatalov became Vice President of Technology responsible for UV LED technology and LED application development at SETi. Dr. Shatalov has over twenty years of experience in semiconductor research and devices and holds more than 12 U.S. patents.
Warren D. Cheesman was appointed Vice President of Manufacturing Operations in October 2022. He has over 25 years of management experience in the semiconductor, medical device and defense equipment sectors. Mr. Cheesman has held roles of increasing responsibility in engineering, operations, quality and strategic sourcing, at equipment manufacturers including Veeco Instruments, Air Techniques, and Kongsberg Defense & Aerospace. Mr. Cheesman provides strategic leadership across all divisions related to manufacturing, quality, and continuous improvement initiatives, with emphasis on process improvement, lean manufacturing, risk management, and collaboration. He holds two master of science degrees from Stony Brook University in Technology Management and Materials Science & Engineering, and a Bachelor of Science degree in Mechanical Engineering from Virginia Tech. His academic and professional experience is also complemented by a Six Sigma Black Belt certification.
Legal Proceedings Involving Directors
None.
Board Leadership
Our Corporate Governance practices contain several features which we believe will ensure that the Board maintains effective and independent oversight of management, including the following:
| ● | Executive sessions without management and non-independent directors present are a standing Board agenda item. Executive sessions of the independent directors are held at any time requested by an independent director and, in any event, are held in connection with at least 100% of regularly scheduled Board meetings. |
| 45 |
| ● | The Board regularly meets in executive session with the CEO without other members of management present. | |
| ● | All Board committee members are independent directors. The committee chairs have authority to hold executive sessions with management and non-independent directors present. |
While our Board has no formal policy with respect to separation of the positions of Chairman and CEO or with respect to whether the Chairman should be a member of management or an independent director, we believe that the appointment of Mr. Waldman as Chairman properly facilitates better communication between the Independent Directors on the one hand and the non-Independent Director and members of management on the other hand and leads to improved oversight and discussions by the Board as a whole. The Chief Executive Officer of the Company, Emmanuel Lakios, is tasked with the responsibility of implementing our corporate strategy, we believe he is best suited for leading discussions with input from the Chairman, at the Board level, regarding performance relative to our corporate strategy and this discussion accounts for a significant portion of the time devoted at the Board meetings.
Our Certificate of Incorporation and Bylaws provide for our Company to be managed by or under the direction of the Board of Directors. Under our Certificate of Incorporation and Bylaws, the number of directors is fixed from time to time by the Board of Directors. The Board of Directors currently consists of six members. Directors are elected for a period of one year and thereafter serve, subject to the Bylaws, until the next annual meeting at which their successors are duly elected by the shareholders.
Code of Ethics
We have adopted a Corporate Code of Conduct and Ethics that applies to our employees, senior management and Board of Directors, including the Chief Executive Officer and Chief Financial Officer. The Corporate Code of Conduct and Ethics is available on our website, www.cvdequipment.com, by clicking on “About Us” and then clicking on “Governance.”
Insider Trading Policy
The
Company has
| 46 |
Audit Committee
Our Board of Directors has an Audit Committee that currently consists of Lawrence J. Waldman, Chairman, Robert M. Brill, and Debra Wasser. During the fiscal year ended December 31, 2024, the Audit Committee held four meetings. Pursuant to the Audit Committee Charter, the Audit Committee is directly responsible for the appointment, compensation, retention and oversight of the work of any independent registered public accounting firm engaged for the purpose of preparing or issuing an audit report or performing other audit, review or attest services for us, and each such independent auditor shall report directly to the Committee. The Audit Committee also reviews with management and the independent auditors, our annual audited financial statements (including the disclosures under “Management’s Discussion and Analysis of Financial Condition and Results of Operations”), the scope and results of annual audits and the audit and non-audit fees of the independent registered public accounting firm. Messrs. Waldman and Brill and Ms. Wasser are “independent” under the requirements of the NASDAQ Stock Market.
The Board of Directors has determined that Mr. Waldman is an “audit committee financial expert” as that term is defined in the rules and regulations of the Securities and Exchange Commission.
Section 16(a) Beneficial Ownership Reporting Compliance
The rules of the Securities and Exchange Commission require us to disclose late filings of reports of stock ownership and changes in stock ownership by our directors, officers and ten percent shareholders. To our knowledge, based solely on our review of (a) the copies of such reports and amendments thereto furnished to us and (b) written representations that no other reports were required, during our fiscal year ended December 31, 2024, all of the filings for our officers, directors and ten percent shareholders were made on a timely basis.
| Item 11. | Executive Compensation. |
Summary Compensation Table
The following table sets forth the compensation of our chief executive officer and chief financial officer, and our “named executive officers,” for the years ended December 31, 2024 and 2023.
| Name and principal position | Year | Salary ($) | Bonus ($) (1) | Option Awards ($) (2) | Stock Awards ($) (2) | All Other Compensation ($) (3) | Total ($) | |||||||||||||||||||||
| Emmanuel Lakios | 2024 | 415,000 | - | - | - | 20,744 | 435,744 | |||||||||||||||||||||
| President and Chief Executive Officer | 2023 | 388,600 | - | 699,990 | - | 19,522 | 1,108,112 | |||||||||||||||||||||
| Richard Catalano Secretary, Chief | 2024 | 283,800 | - | - | - | 26,772 | 310,572 | |||||||||||||||||||||
| Financial Officer and Executive Vice President | 2023 | 274,700 | - | 233,330 | - | 27,201 | 535,231 | |||||||||||||||||||||
| Jeffrey A. Brogan | 2024 | 206,000 | 25,000 | - | - | 7,578 | 238,578 | |||||||||||||||||||||
| Vice President Sales & Marketing | 2023 | 203,300 | - | 139,998 | - | 7,863 | 351,161 | |||||||||||||||||||||
| (1) | Reflects cash bonuses under the Company’s Management Bonus Plan. Bonuses listed for a particular year represents amounts earned with respect to such year even though all or part of such amounts have been paid during the following year. |
| (2) | These columns represent the grant date fair value of the stock awards as calculated in accordance with FASB ASC 718 (Stock Compensation). The stock options granted in 2023 vest 25% per year over four years and have a ten-year life. There were no stock options granted in 2024 to the named executive officers |
| (3) | All other compensation consists of 1) 401(k) match in 2024 and 2023 of $10,350 and $9,900 for Emmanuel Lakios, $8,514 and $9,179 for Richard Catalano, and $6,930 and $7,863 for Jeffrey Brogan, respectively; and 2) health, life and disability insurance premiums in 2024 and 2023 of $10,394 and $9,622 for Emmanuel Lakios, $18,258 and $18,022 for Richard Catalano and $0 and $648 for Jeffrey Brogan. |
| 47 |
Employment Agreements and Potential Payments Upon Termination or Change in Control
Emmanuel Lakios Employment Agreement
On June 1, 2021, the Company entered into an Employment Agreement with Emmanuel Lakios, the Company’s President and Chief Executive Officer (the “Lakios Agreement”). The term of Mr. Lakios’s employment under the Lakios Agreement commenced as of the effective date thereof and shall continue until terminated in accordance with the terms of the Lakios Agreement. Under the Lakios Agreement, Mr. Lakios will receive an initial annual base salary of $288,000, which shall be reviewed from time to time and may be increased, but not decreased, by the Compensation Committee of the Board of Directors (the “Committee”) in its sole and exclusive discretion. Mr. Lakios shall be entitled to participate in any bonus or incentive plan available to the Company’s senior executives generally, on such terms as the Committee may determine in its discretion.
In the event of the termination of the Lakios Agreement and Mr. Lakios’s employment thereunder, Mr. Lakios or his estate (in the event of his death) shall be entitled to (A) receive any unpaid base salary earned and accrued under the Lakios Agreement prior to the date of termination (and reimbursement for expenses incurred prior to the date of termination), (B) indemnification in accordance with any applicable indemnification plan, program, corporate governance document or other arrangement, and any vested rights pursuant to any insurance plan, benefit plan or retirement plan, and, except in the event of Mr. Lakios’s termination by the Company for Cause (as defined in the Lakios Agreement), (C) treatment of his stock option grants in accordance with the terms of the applicable plan and award agreement.
In the event Mr. Lakios’s employment is terminated as a result of death or disability, Mr. Lakios shall also be entitled to receive a pro rata bonus payment under the Company’s bonus Plan for the year of termination, if applicable.
In the event Mr. Lakios’s employment is terminated by the Company for Cause, Mr. Lakios’s stock option grants, whether vested or unvested, shall immediately terminate and be null and void.
In the event Mr. Lakios’s employment is terminated by the Company without Cause, or by Mr. Lakios for Good Reason (as defined in the Lakios Agreement), Mr. Lakios shall also be entitled to (A) a pro rata bonus for the year of termination, and (B) continued payment of his base salary and the Company’s portion of Mr. Lakios’s then existing medical benefits for the nine (9) month period following the date of termination.
| 48 |
The Lakios Agreement contains customary non-competition, non-solicitation, and confidentiality provisions in favor of the Company.
Other then as set forth above, there are no arrangements for compensation of directors or Named Executive Officers and there are no employment contracts between the Company and its directors or any change in control arrangements.
Equity Awards
We do not otherwise maintain any written policies
on the timing of awards of stock options, stock appreciation rights, or similar instruments with option-like features.
During fiscal 2024, the Company did not grant any equity awards to its named executive officers.
Outstanding Equity Awards at December 31, 2024
The following table sets forth the outstanding equity awards held by our named executive officers as of December 31, 2024.
| OPTION AWARDS | STOCK AWARDS | |||||||||||||||||||||||||||||
| Name | Number of Securities Underlying Options Exercisable | Number of Securities Options Unexercisable | Exercise Price | Option Expiration Date | Number of shares or units of stock that have not vested | Market value of shares or units of stock that have not vested | Equity Incentive Plan Awards: Number of unearned shares or units that not vested | Equity Incentive Plan Awards: Market or payout value of unearned shares or units that have not vested | ||||||||||||||||||||||
| Emmanuel Lakios | 18,750 | 56,250 | $ | 14.11 | 3/23/2033 | - | - | - | $ | - | ||||||||||||||||||||
| 37,500 | 37,500 | $ | 5.02 | 8/17/2032 | ||||||||||||||||||||||||||
| 75,000 | 25,000 | $ | 4.26 | 6/1/2031 | ||||||||||||||||||||||||||
| 100,000 | - | $ | 10.30 | 2/6/2027 | ||||||||||||||||||||||||||
| Richard Catalano | 6,250 | 18,750 | $ | 14.11 | 3/23/2033 | - | - | - | $ | - | ||||||||||||||||||||
| 10,000 | 10,000 | $ | 5.42 | 8/30/2032 | ||||||||||||||||||||||||||
| Jeffrey A. Brogan | 3,750 | 11,250 | $ | 14.11 | 3/23/2033 | - | - | - | $ | - | ||||||||||||||||||||
| 7,500 | 7,500 | $ | 5.02 | 8/17/2032 | ||||||||||||||||||||||||||
| 15,000 | 5,000 | $ | 4.01 | 7/15/2021 | ||||||||||||||||||||||||||
| 20,000 | - | $ | 11.61 | 10/31/2027 | ||||||||||||||||||||||||||
2024 Director Compensation
The following table sets forth a summary of the compensation we paid to our non-employee directors in 2024.
| Name | Fees Earned or Paid in Cash | Option Awards | Restricted Stock Awards | Total | ||||||||||||
| Lawrence J. Waldman | $ | 113,000 | - | $ | 40,000 | $ | 153,000 | |||||||||
| Robert M. Brill | 50,000 | - | 40,000 | 90,000 | ||||||||||||
| Debra Wasser | 40,000 | - | 40,000 | 80,000 | ||||||||||||
| Ashraf Lotfi | 42,500 | - | 40,000 | 82,500 | ||||||||||||
| Andrew Africk | 23,736 | - | 23,738 | 47,474 | ||||||||||||
| Raymond A. Nielsen | 30,435 | - | 40,000 | 70,435 | ||||||||||||
| 49 |
On October 11, 2021, the Board of Directors, following the unanimous recommendation of the Board’s Compensation Committee, unanimously approved a director compensation plan, effective October 1, 2021 (the “Plan”). The Plan is based on the recommendations of an independent compensation consultant engaged by the Board’s Compensation Committee. Pursuant to the Plan, each director is entitled to Director Compensation, divided into the following pay components: (i) Annual Board of Directors cash compensation in the amount of $40,000 and (ii) an annual equity retainer in the amount of $40,000, to be automatically granted on the date of the Company’s annual meeting of shareholders. Additionally, a director serving as a chairman for the Board’s Compensation Committee or Nominating, Governance and Compliance Committee is entitled to annual chair compensation in the amount of $10,000. The director serving as the chairman for the Board’s Audit Committee is entitled to chair compensation in the amount of $25,000. Furthermore, the director serving as the Non-Executive Chairman is entitled to Board leadership compensation in the amount of $48,000.
Raymond A. Nielsen retired from the Board of Directors on August 9, 2024 and Andrew Africk was appointed to the Board of Directors on May 28, 2024.
| Item 12. | Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters. |
The following table sets forth, as of March 19, 2025, information regarding the beneficial ownership of our common stock by (a) each person who is known to us to be the owner of more than five percent (5%) of our common stock, (b) each of our directors, (c) each of the named executive officers, and (d) all directors and executive officers and executive employees as a group. For purposes of the table, a person or group of persons is deemed to have beneficial ownership of any shares that such person has the right to acquire within 60 days of March 19, 2025.
| Name and Address of Beneficial Owner (1) | Amounts and Nature of Beneficial Ownership (2) | Percent of Class (%) | ||||||
| 5% or Greater Shareholder: Leviticus Partners, L.P. | 617,832 | 9.0 | ||||||
| Directors and Executive Officers: Andrw Africk / ADA Partners LP | 1,303,690 | (4) | 18.9 | |||||
| Emmanuel Lakios | 256,358 | (3) | 3.7 | |||||
| Kevin R. Collins | 102,437 | (3) | 1.5 | |||||
| Lawrence J. Waldman | 80,221 | (4) | 1.2 | |||||
| Jeffrey A. Brogan | 54,519 | (3) | * | |||||
| Robert M. Brill | 33,006 | (4) | * | |||||
| Maxim Shatalov | 30,000 | (3) | * | |||||
| Richard Catalano | 22,500 | (3) | * | |||||
| Warren Cheesman | 15,000 | (3) | * | |||||
| Ashraf Lotfi | 14,811 | (4) | * | |||||
| Debra Wasser | 14,306 | (4) | * | |||||
| All directors and executive officers and executive employees as a group (eleven persons) | 1,926,848 | 28.0 | ||||||
* Less than 1% of the outstanding common stock or less than 1% of the voting power
| (1) | The address of Messrs. Lakios, Waldman, Nielsen, Brogan, Brill, Shatalov, Catalano, Cheesman. Lotfi and Ms. Wasser is c/o CVD Equipment Corporation, 355 South Technology Drive, Central Islip, New York 11722. The address of Mr. Collins is c/o Stainless Design Concepts, 1117 Old Kings Highway, Saugerties, NY 12477. The address of Andrew Africk / ADA Partners is c/o Searay Capital, 111 West 67th Street, New York, NY 10023. The address of Leviticus Partners, L.P. is 200 Park Avenue, Suite 1700, New York, NY 10166. |
| (2) | All of such shares are owned directly with sole voting and investment power, unless otherwise noted below. |
| (3) | Does not include unvested options to purchase the following shares of our common stock: Lakios – 100,000; Collins – 17,500; Brogan – 20,000; Shatalov – 20,000; Catalano – 22,500; and Cheesman – 15,000 |
| (4) | Does not include unvested restricted shares of our common stock: Waldman – 2,825; Africk – 2,825; Brill – 2,825; Lotfi – 2,825 and Wasser – 2,825. Does not include shares to be issued per Director compensation agreement related to the Annual Equity Retainer in the amount of $40,000, to be determined at the 2025 Annual Meeting of Shareholders. |
| 50 |
Equity Compensation Plan Information Table
The following table provides information about shares of our common stock that may be issued upon the exercise of options under all of our existing compensation plans as of December 31, 2024.
| Number of securities to be issued upon exercise of outstanding options, warrants and rights (1) | Weighted-average exercise price of outstanding options, warrants and rights (2) | Number of securities remaining available for future issuance | ||||||||||
Plan Category | ||||||||||||
| Equity compensation plans approved by security holders | 823,125 | $ | 8.24 | 183,128 | ||||||||
| Equity compensation plans not approved by security holders | — |
N/A | — | |||||||||
| Total | 823,125 | $ | 8.24 | 183,128 | ||||||||
| (1) | Reflects aggregate options outstanding under our 2007 Share Incentive Plan, 2016 Equity Incentive Plan and 2022 Equity Incentive Plan. |
| (2) | Calculation is exclusive of the value of any unvested restricted stock awards. |
| Item 13. | Certain Relationships and Related Transactions, and Director Independence. |
Transactions with related persons, promoters and certain control persons.
None.
Director Independence
The current members of our Board of Directors are Lawrence J. Waldman, Emmanuel Lakios, Andrew Africk, Robert M. Brill, Debra Wasser and Ashraf Lotfi. Messrs. Waldman, Africk, Brill and Lotfi and Ms. Wasser have been determined to be “independent” as defined under Rule 4200 of the Nasdaq Stock Market.
| Item 14. | Principal Accountant Fees and Services. |
The following presents fees for professional audit services rendered by Marcum, LLP, Certified Public Accountants, the Company’s independent registered public accounting firm for the years ended December 31, 2024 and 2023.
| 2024 | 2023 | |||||||
| Audit fees | $ | 224,025 | $ | 236,076 | ||||
| Audit-related fees | 25,750 | 55,002 | ||||||
| All other fees | - | - | ||||||
| Total fees | $ | 249,775 | $ | 291,078 | ||||
Audit Fees
Audit fees consisted of the review of the first three quarters and audit of the year-end.
Audit-related Fees
Consisted of the audit of the Company’s defined contribution 401(k) plan and fees associated with registration statements and comfort letter.
Audit Committee Approval
The engagement of the Company’s independent registered public accounting firm is pre-approved by the Company’s Audit Committee. The Audit Committee pre-approves all fees billed and all services rendered by the Company’s independent registered public accounting firm.
| 51 |
PART IV
| 52 |
101.INS*** XBRL Instance
101.SCH*** XBRL Taxonomy Extension Schema
101.CAL*** XBRL Taxonomy Extension Calculation
101.DEF*** XBRL Taxonomy Extension Definition
101.LAB*** XBRL Taxonomy Extension Labels
101.PRE*** XBRL Taxonomy Extension Presentation
* Management contract or compensatory plan or arrangement required
** Filed herewith
*** XBRL information is furnished and not filed or a part of a registration statement or prospectus for purposes of sections 11 or 12 of the Securities Act of 1933, as amended, is deemed not filed for purposes of section 18 of the Securities Exchange Act of 1934, as amended, and otherwise is not subject to liability under these sections.
| 53 |
SIGNATURES
In accordance with Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
| DATE: | March 19, 2025 | |
| CVD EQUIPMENT CORPORATION | ||
| By: | /s/ Emmanuel Lakios | |
| Name: | Emmanuel Lakios | |
| Title: | President and Chief Executive Officer | |
| By: | /s/ Richard Catalano | |
| Name: | Richard Catalano | |
| Title: | Executive Vice President, Chief Financial Officer and Secretary | |
| Principal Financial and Accounting Officer |
In accordance with the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated below.
| NAME | POSITION | DATE | ||
| /s/ Emmanuel Lakios | President, Chief Executive Officer | 3/19/2025 | ||
| Emmanuel Lakios | (Principal Executive Officer) | |||
| /s/ Lawrence J. Waldman | Director, Chairman of the Board | 3/19/2025 | ||
| Lawrence J. Waldman | ||||
| /s/ Andrew Africk | Director | 3/19/2025 | ||
| Andrew Africk | ||||
| /s/ Robert M. Brill | Director | 3/19/2025 | ||
| Robert M. Brill | ||||
/s/ Ashraf Lotfi |
Director |
3/19/2025 | ||
| Ashraf Lotfi | ||||
/s/ Debra Wasser |
Director |
3/19/2025 | ||
| Debra Wasser |
| 54 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARies
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Stockholders and Board of Directors of
CVD Equipment Corporation
Opinion on the Financial Statements
We have audited the accompanying consolidated balance sheets of CVD Equipment Corporation and Subsidiaries (the “Company”) as of December 31, 2024 and 2023, the related consolidated statements of operations, changes in stockholders’ equity and cash flows for each of the two years in the period ended December 31, 2024, and the related notes (collectively referred to as the “financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2024 and 2023, and the results of its operations and its cash flows for each of the two years in the period ended December 31, 2024, in conformity with accounting principles generally accepted in the United States of America.
Basis for Opinion
These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.
Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.
Critical Audit Matters
The critical audit matters communicated below are matters arising from the current period audit of the financial statements that were communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matters below, providing separate opinions on the critical audit matters or on the accounts or disclosures to which they relate.
| F-1 |
Revenue Recognition – Estimated Total Contract Costs
Description of the Matter
As discussed in Notes 2 and 3 to the consolidated financial statements, the Company recognizes revenue from the sale of systems (“System Projects”) over time by using an input method based on costs incurred as it best depicts the Company’s progress toward satisfaction of the performance obligation. Under this method, revenue arising from such contracts is recognized as work is performed based on the ratio of costs incurred to date to the total estimated costs at completion of the performance obligations. The estimation of these costs requires judgment by the Company given the unique product specifications and requirements for contracts related to the design, development, and manufacture of the system. During the year ended December 31, 2024, the Company recognized approximately $22.1 million of revenue recognized over time.
Subjective judgment is required by management in determining the assumptions in estimating the estimated costs to complete on contracts for which revenue is recognized over time using a cost-to-cost model. Complex auditor judgment was required in evaluating initial cost estimates and expected costs to complete.
How We Addressed the Matter in Our Audit
The primary procedures we performed to address this critical audit matter included the following:
| ● | Obtaining an understanding of management’s process in developing the cost estimates; | |
| ● | Obtain and review contracts to ensure that the recognition of revenue over time was appropriate; | |
| ● | Evaluating management’s ability to reasonably estimate costs by performing a comparison of the actual costs to prior period estimates, including evaluating the timely identification of circumstances that may warrant a modification to the estimated costs; | |
| ● | Evaluate management’s methodologies and the consistency of management’s methodologies over the life of the contracts; | |
| ● | Tested the original estimated costs and profit margins on System Projects by obtaining the original estimates, comparing the actual costs and profit margins to the original estimates and investigating significant changes; and | |
| ● | Tested the estimated costs to complete Systems Projects that were not completed during the year ended December 31, 2024 by comparing the estimated cost to complete at December 31, 2024 to actual cost incurred subsequent to December 31, 2024. |
/s/ Marcum llp
We have served as the Company’s auditor since 2019.
March 19, 2025
| F-2 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
Consolidated Balance Sheets
As of December 31, 2024 and 2023
(in thousands, except share amounts)
| 2024 | 2023 | |||||||
| ASSETS | ||||||||
| Current assets: | ||||||||
| Cash and cash equivalents | $ | $ | ||||||
| Accounts receivable, net of allowance for credit losses | ||||||||
| Contract assets | ||||||||
| Inventories | ||||||||
| Other current assets | ||||||||
| Total current assets | ||||||||
| Property, plant and equipment, net | ||||||||
| Other assets | ||||||||
| Total assets | $ | $ | ||||||
| LIABILITIES AND STOCKHOLDERS’ EQUITY | ||||||||
| Current liabilities: | ||||||||
| Accounts payable | $ | $ | ||||||
| Accrued expenses | ||||||||
| Current maturities of long-term debt | ||||||||
| Deposits from purchasers of MesoScribe assets – note 14 | ||||||||
| Contract liabilities | ||||||||
| Total current liabilities | ||||||||
| Long-term debt, net of current portion | ||||||||
| Total liabilities | ||||||||
| Commitments and contingencies (see note 15) | ||||||||
| Stockholders’ equity: | ||||||||
| Common stock - $ par value – shares authorized; issued and outstanding at December 31, 2024 and at December 31, 2023 | ||||||||
| Additional paid-in capital | ||||||||
| Accumulated deficit | ( | ) | ( | ) | ||||
| Total stockholders’ equity | ||||||||
| Total liabilities and stockholders’ equity | $ | $ | ||||||
The accompanying notes are an integral part of the consolidated financial statements
| F-3 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
Consolidated Statements of Operations
Years ended December 31, 2024 and 2023
(in thousands, except per share amounts)
| 2024 | 2023 | |||||||
| Revenue | $ | $ | ||||||
| Cost of revenue | ||||||||
| Gross profit | ||||||||
| Operating expenses: | ||||||||
| Research and development | ||||||||
| Selling | ||||||||
| General and administrative | ||||||||
| Gain on sales of equipment | ( | ) | ||||||
| Loss on disposition of Tantaline | ||||||||
| Impairment charge | ||||||||
| Total operating expenses, net | ||||||||
| Operating loss | ( | ) | ( | ) | ||||
| Other income (expense): | ||||||||
| Interest income | ||||||||
| Interest expenses | ( | ) | ( | ) | ||||
| Foreign exchange income | ||||||||
| Other income | ||||||||
| Total other income, net | ||||||||
| Loss before income tax | ( | ) | ( | ) | ||||
| Income tax expense (benefit) | ( | ) | ||||||
| Net loss | $ | ( | ) | $ | ( | ) | ||
| Loss per common share: | ||||||||
| Basic | $ | ( | ) | $ | ( | ) | ||
| Diluted | $ | ( | ) | $ | ( | ) | ||
| Weighted average number of shares: | ||||||||
| Basic | ||||||||
| Diluted | ||||||||
The accompanying notes are an integral part of the consolidated financial statements
| F-4 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
Consolidated Statements of Changes in Stockholders’ Equity
Years ended December 31, 2024 and 2023
(in thousands, except share amounts)
| Common stock | Additional paid-in | Retained Earnings (Accumulated | ||||||||||||||||||
| Shares | Par Value | Capital | Deficit) | Total | ||||||||||||||||
| Balance at January 1, 2023 | ||||||||||||||||||||
| Net loss | - | ( | ) | ( | ) | |||||||||||||||
| Stock-based compensation | ||||||||||||||||||||
| Exercise of stock options and issuance of shares | ||||||||||||||||||||
| Balance at December 31, 2023 | $ | $ | $ | ( | ) | $ | ||||||||||||||
| Net loss | - | ( | ) | ( | ) | |||||||||||||||
| Stock-based compensation | ||||||||||||||||||||
| Balance at December 31, 2024 | $ | $ | $ | ( | ) | $ | ||||||||||||||
The accompanying notes are an integral part of the consolidated financial statements
| F-5 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
Consolidated Statements of Cash Flows
Years ended December 31, 2024 and 2023
(in thousands)
| 2024 | 2023 | |||||||
| Cash flows from operating activities: | ||||||||
| Net loss | $ | ( | ) | $ | ( | ) | ||
| Adjustments to reconcile net loss to net cash used in operating activities: | ||||||||
| Stock-based compensation | ||||||||
| Depreciation and amortization | ||||||||
| Provision for excess and obsolete inventory | ||||||||
| Provision for bad debt | ||||||||
| Gain on sales of equipment | ( | ) | ||||||
| Loss on disposition of Tantaline | ||||||||
| Impairment charge | ||||||||
| Changes in operating assets and liabilities, net of effects of disposition of Tantaline and sales of equipment: | ||||||||
| Accounts receivable | ( | ) | ||||||
| Contract assets | ( | ) | ||||||
| Inventories | ( | ) | ||||||
| Employee retention credit receivable | ||||||||
| Other assets | ( | ) | ( | ) | ||||
| Accounts payable | ( | ) | ( | ) | ||||
| Accrued expenses | ( | ) | ||||||
| Contract liabilities | ( | ) | ||||||
| Net cash used in operating activities | ( | ) | ( | ) | ||||
| Cash flows from investing activities: | ||||||||
| Purchase of property and equipment | ( | ) | ( | ) | ||||
| Net proceeds from sales of equipment | ||||||||
| Net cash used in disposition of Tantaline | ( | ) | ||||||
| Net cash provided by (used in) investing activities | ( | ) | ||||||
| Cash flows from financing activities: | ||||||||
| Payments of long-term debt | ( | ) | ( | ) | ||||
| Proceeds from exercise of stock options | ||||||||
| Net cash used in financing activities | ( | ) | ( | ) | ||||
| Net decrease in cash and cash equivalents | ( | ) | ( | ) | ||||
| Cash and cash equivalents at beginning of year | ||||||||
| Cash and cash equivalents at end of year | $ | $ | ||||||
| Supplemental disclosure of cash flow information: | ||||||||
| Income taxes paid | $ | $ | ||||||
| Interest paid | $ | $ | ||||||
| Inventory transferred to property, plant and equipment | $ | $ | ||||||
The accompanying notes are an integral part of the consolidated financial statements
| F-6 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 1 – Business Description
CVD Equipment Corporation and its subsidiaries (the “Company”) is a New York corporation. Its principal business activities include designing, developing, and manufacturing a broad range of chemical vapor deposition, physical vapor transport, gas control, and other equipment and process solutions used to develop and manufacture materials and coatings for industrial applications and research. The Company’s products are used in production environments as well as research and development centers, both academic and corporate.
Note 2 - Summary of Significant Accounting Policies
Basis of Presentation
The accompanying consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (“GAAP”).
Liquidity
At
December 31, 2024, the Company had $
Reclassifications
In addition, certain reclassifications have been made to the prior period consolidated financial statements to conform to the current period presentation. These reclassifications had no effect on net loss.
Principles of Consolidation
The consolidated financial statements include the accounts of CVD Equipment Corporation and its wholly owned subsidiaries. All significant intercompany accounts and transactions have been eliminated in consolidation.
Use of Estimates
The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.
The Company’s significant estimates are the accounting for certain items such as revenues on long-term contracts recognized on the input method, valuation of inventories at the lower of cost or net realizable value; allowance for credit losses; valuation allowances for deferred tax assets, estimated lives and impairment considerations of long-lived assets and valuation of stock-based compensation.
| F-7 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 2 - Summary of Significant Accounting Policies (continued)
Revenue Recognition
In accordance with Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) 606 - Revenue from Contracts with Customers (“ASC 606”), the Company records revenue in an amount that reflects the consideration to which the Company expects to be entitled in exchange for goods or services promised to its customers. Under ASC 606, the Company follows a five-step model to: (1) identify the contract with the customer; (2) identify the performance obligations in the contract; (3) determine the transaction price for the contract; (4) allocate the transaction price to the performance obligations; and (5) recognize revenue using one of the following two methods:
Over time
The Company designs, manufactures and sells custom chemical vapor deposition, thermal process equipment and other equipment through contractual agreements. These system sales require the Company to deliver functioning equipment that is generally completed within two to eighteen months from commencement of order acceptance. For systems sales that meet the criteria to recognize revenue over time, the Company recognizes revenue over time by using an input method based on costs incurred as it depicts the Company’s progress toward satisfaction of the performance obligation. For system sales that do not meet the criteria to recognize revenue over time based on the contract provisions, the Company recognizes revenue based on point in time.
Under the over time method, revenue arising from fixed price contracts is recognized as work is performed based on the ratio of costs incurred to date to the total estimated costs at completion of the performance obligations. Incurred costs include all direct material and labor costs and those indirect costs related to contract performance, such as supplies, tools, repairs and depreciation costs. Contract material costs are included in incurred costs when the project materials have been purchased or moved to work-in-process, and installed, as required by the project’s engineering design. Cost based input methods of revenue recognition require the Company to make estimates of costs to complete the projects. In making such estimates, significant judgment is required to
evaluate
assumptions related to the costs to complete the projects, including materials, labor and other system costs. If the estimated total
costs on any contract are greater than the net contract revenues, the Company recognizes the entire estimated loss in the period the
loss becomes known and can be reasonably estimated. There were
The timing of revenue recognition, billings and collections results in accounts receivables, unbilled receivables or contract assets and contract liabilities on our consolidated balance sheet. Under typical payment terms for our contracts accounted for over time, amounts are billed as work progresses in accordance with agreed-upon contractual terms, either at periodic intervals or upon achievement of contractual milestones.
| F-8 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 2 - Summary of Significant Accounting Policies (continued)
Under ASC 606, payments received from customers in excess of revenue recognized to-date results in a contract liability. These contract liabilities are not considered to represent a significant financing component of the contract because the Company believes these cash advances and deposits are generally used to meet working capital demands which can be higher in the earlier stages of a contract. Also, advanced payments and deposits provide the Company with some measure of assurance that the customer will perform on its obligations under the contract.
Contract assets include unbilled amounts typically resulting from system sales under contracts and represents revenue recognized that exceeds the amount billed to the customer.
Contract liabilities include advance payments and billings in excess of revenue recognized. The Company typically receives down payments upon receipt of order and progress payments as the system is manufactured.
Contract assets and contract liabilities are classified as current as these contracts in progress are expected to be substantially completed within the next twelve months.
Point in time
For non-system sales of products and services, revenue is recognized at the point in time when control of the promised products or services is transferred to the Company’s customers, in an amount that reflects the consideration the Company expects to be entitled to in exchange for those products or services (the transaction price). A performance obligation is a promise in a contract to transfer a distinct product or service to a customer and is the unit of account under ASC 606, “Revenue from Contracts with Customers.”
For any system equipment sales where the equipment would have an alternative use or where the contract provisions of the contract preclude the use of over time revenue recognition, revenue is recognized at the point in time when control of the equipment is transferred to the customer. For the years ended December 31, 2024 and 2023, all system equipment sales were recorded over time by using an input method except for a) one contract that was recorded as revenue at the point in time the equipment was transferred to the customer during 2024 and b) one contract that was entered during 2024 and will be recognized as revenue after December 31, 2024 upon transfer of the equipment to the customer.
| F-9 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 2 - Summary of Significant Accounting Policies (continued)
Inventories
Inventories (raw materials, work-in-process and finished goods) are valued at the lower of cost (determined on the first-in, first-out method) or net realizable value. Work-in-process and finished goods inventory reflect all accumulated production costs, which are comprised of direct production costs and overhead, and is reduced by amounts recorded in cost of sales as the related revenue is recognized. Indirect costs relating to long-term contracts, which include expenses such as general and administrative, are charged to expense as incurred and are not included in our cost of sales or work-in-process and finished goods inventory.
Obsolete inventory or inventory in excess of management’s estimated usage requirement is written down to its estimated net realizable value if less than cost. The Company evaluates usage requirements by analyzing historical usage, anticipated demand, alternative uses of materials, and other qualitative factors. Unanticipated changes in demand for the Company’s products may require a write down of inventory, which would be reflected in cost of sales in the period the revision is made.
Product Warranty
Income Taxes
Deferred tax assets and liabilities are determined based on the estimated future tax effects of temporary differences between the financial statements and tax bases of assets and liabilities, as measured by using the future enacted tax rates. Deferred tax expense (benefit) is the result of changes in the deferred tax assets and liabilities. The Company records a valuation allowance against deferred tax assets when it is more likely than not that future tax benefits will not be utilized based on a lack of sufficient positive evidence.
| F-10 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 2 - Summary of Significant Accounting Policies (continued)
The
Company records uncertain tax positions in accordance with ASC 740 on the basis of a two-step process in which (1) the Company determines
whether it is more likely than not the tax position will be sustained on examination by taxing authorities based on the technical merits
of the position and (2) for those positions that meet the more-likely-than-not recognition threshold, we recognize the largest amount
of tax benefit that is more than
The Company’s policy for global intangible low taxed income (“GILTI”) is to treat such amounts as a period cost when incurred.
Impairment of Long-Lived Assets and Intangibles
Long-lived assets consist primarily of property, plant, and equipment. Intangibles consist of patents, copyrights and intellectual property, licensing agreements and certifications. Long-lived assets are reviewed for impairment whenever events or circumstances indicate their carrying value may not be recoverable. When such events or circumstances arise, an estimate of the future undiscounted cash flows produced by the asset, or the appropriate grouping of assets, is compared to the asset’s carrying value to determine if impairment exists. If the asset is determined to be impaired, the impairment loss is measured on the excess of its carrying value over its fair value. Assets to be disposed of are reported at the lower of their carrying value or net realizable value.
Property, Plant and Equipment
Property,
plant and equipment are recorded at cost. Depreciation is determined on a straight-line basis for buildings and building improvements
over
Research and Development
Research and development costs are expensed as incurred and include charges for the development of new technology and transition of existing technology into new products.
| F-11 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 2 - Summary of Significant Accounting Policies (continued)
Basic earnings per common share is computed by dividing the net income by the weighted average number of shares of common stock outstanding during each period. When applicable, diluted earnings per common share is determined using the weighted-average number of common shares outstanding during the period, adjusted for the dilutive effect of common stock equivalents, consisting of shares that might be adjusted upon exercise of common stock options, unvested restricted shares, and warrants.
Potential common shares issued are calculated using the treasury stock method, which recognizes the use of proceeds that could be obtained upon the exercise of options and warrants in computing diluted earnings per share. It assumes that any proceeds would be used to purchase common stock at the average market price of the common stock during the period.
Cash and Cash Equivalents
The
Company had cash and cash equivalents of $
The
Company places most of its temporary cash investments with financial institutions, which from time to time may exceed the Federal Deposit
Insurance Corporation limit. The amount in excess of the limit at December 31, 2024 and 2023 was $
Concentration of Credit Risk
Financial instruments that potentially subject the Company to concentrations of credit risk consist primarily of cash, cash equivalents, and accounts receivable. The Company places its cash equivalents with financial institutions and invests its excess cash primarily in treasury bills, certificates of deposit or deposit accounts. The Company has established guidelines relative to credit ratings and maturities that seek to maintain stability and liquidity.
The Company routinely assesses the financial strength of its customers. In accordance with the “expected credit loss” model, the carrying amount of accounts receivable is reduced by a valuation allowance that reflects the best estimate of the amounts the Company does not expect to collect. In addition to reviewing delinquent accounts receivable, the Company consider many factors in estimating our reserve, including types of customers and their credit worthiness, experience and historical data adjusted for current conditions and reasonable supportable forecasts. The Company records an allowance for credit losses based upon a specific review of all significant outstanding invoices. For those invoices not specifically reviewed, provisions are provided based upon the collection history, current economic trends and reasonable supportable forecasts.
| F-12 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 2 - Summary of Significant Accounting Policies (continued)
Accounts
receivable is presented net of an allowance for credit losses of $
The
Company has accounts receivables from certain customers that exceed
Sales Concentrations
Revenue
to a single customer in any one year can exceed
Export
sales to customers represented approximately
Supplier Risk
The Company relies on suppliers to manufacture many of the components and subassemblies used in its products. Quality or performance failures of the Company’s products or changes in its manufacturers’ financial or business condition could disrupt the Company’s ability to supply quality products to its customers and thereby have a material and adverse effect on its business and operating results. Some of the components and technologies used in the Company’s products are purchased and licensed from a single source or a limited number of sources. The loss of any of these suppliers may cause the Company to incur additional transition costs, result in delays in the manufacturing and delivery of its products or cause it to carry excess or obsolete inventory and could cause it to redesign its products.
| F-13 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 2 - Summary of Significant Accounting Policies (continued)
Fair Value of Financial Instruments
The carrying amounts of financial instruments including cash and cash equivalents, accounts receivable, accounts payable, contract assets and contract liabilities approximate fair value due to the relatively short-term maturity of these instruments. The carrying value of long-term debt approximates fair value based on prevailing borrowing rates currently available for loans with similar terms and maturities.
The Company records stock-based compensation in accordance with the provisions set forth in ASC 718, “Stock Compensation”. ASC 718 requires companies to recognize the cost of employee services received in exchange for awards of equity instruments based upon the grant date fair value of those awards over the vesting period. The Company uses the Black-Scholes option-pricing model to compute the estimated fair value of option awards and includes assumptions regarding expected volatility, expected option term, dividend yields and risk-free interest rates. The value of restricted stock awards are based on the fair value on the date of the grant.
Shipping and Handling
It
is the Company’s policy to include freight charges billed to customers in total revenue. The amount included in revenue was $
Recently Adopted Accounting Standards
In November 2023, the FASB issued ASU 2023-07, Segment Reporting (Topic 280): Improvements to Reportable Segment Disclosures. The amendments in this update expand annual and interim disclosure requirements for reportable segments, primarily through enhanced disclosures about significant segment expenses. This update is effective for our annual report for fiscal year 2024, and interim periods thereafter, and was applied retrospectively to the fiscal year 2024 financial statements.. The Company adopted ASU 2023-07 in 2024 and the required disclosures are included in Note 13.
Recently Issued Accounting Standards
In December 2023, the FASB issued ASU 2023-09, Income Taxes (Topic 740): Improvement to Income Tax Disclosures. The amendments further enhance income tax disclosures, primarily through standardization and disaggregation of rate reconciliation categories and income taxes paid by jurisdiction. This ASU is effective for our annual report for fiscal year 2026, with early adoption permitted, and should be applied either prospectively or retrospectively. The Company is currently evaluating the timing of adoption and impact of this ASU on our consolidated financial statements.
| F-14 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 2 - Summary of Significant Accounting Policies (continued)
In November 2024, the FASB issued ASU 2024-03, “Disaggregation of Income Statements Expenses (Subtopic 220-40),” to improve income statement expenses disclosure. The standard requires more detailed information related to the types of expenses, including (among other items) the amounts of purchases of inventory, employee compensation, depreciation and intangible asset amortization included within each interim and annual income statement’s expense caption, as applicable. This authoritative guidance can be applied prospectively or retrospectively and will be effective for financial statements issued for annual periods beginning after December 15, 2026, and interim reporting periods within annual reporting periods beginning after December 15, 2027, with early adoption permitted. The Company is currently in the process of evaluating the impact of adoption on its consolidated financial statements.
The Company believes there is no additional new accounting guidance adopted, but not yet effective that is relevant to the readers of our financial statements. However, there are numerous new proposals under development which, if and when enacted, may have a significant impact on our financial reporting.
Note 3 – Revenue
The following table represents a disaggregation of revenue from contracts by end markets for the years ended December 31, 2024 and 2023 (in thousands):
| Year Ended December 31, 2024 | ||||||||||||
| Over time | Point in time | Total | ||||||||||
| Energy | $ | $ | $ | |||||||||
| Aerospace | ||||||||||||
| Industrial | ||||||||||||
| Research | ||||||||||||
| Total | $ | $ | $ | |||||||||
| Year Ended December 31, 2023 | ||||||||||||
| Over time | Point in time | Total | ||||||||||
| Energy | $ | $ | $ | |||||||||
| Aerospace | ||||||||||||
| Industrial | ||||||||||||
| Research | ||||||||||||
| Total | $ | $ | $ | |||||||||
| F-15 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 3 – Revenue (continued)
The energy market includes customers involved in the manufacture of silicon carbide wafers and batteries. Aerospace market includes customers that manufacture aircraft engines. Industrial end market consists of various end customers in diverse industries. Research market principally represents customers that are universities and other research institutions.
The
Company has unrecognized contract revenue of approximately $
Judgment is required to evaluate assumptions including the amount of net contract revenues and the total estimated costs to determine the Company’s progress towards contract completion and to calculate the corresponding amount of revenue to recognize.
Changes in estimates for sales of systems occur for a variety of reasons, including but not limited to (i) build accelerations or delays, (ii) product cost forecast changes, (iii) cost related change orders or add-ons, or (iv) changes in other information used to estimate costs. Changes in estimates may have a material effect on the Company’s consolidated financial position and results of operations.
Contract assets and contract liabilities on input method type contracts in progress are summarized at December 31 as follows (in thousands):
| 2024 | 2023 | |||||||
| Costs incurred on contracts in progress | $ | $ | ||||||
| Estimated earnings | ||||||||
| Billings to date | ( | ) | ( | ) | ||||
| ( | ) | ( | ) | |||||
| Deferred revenue related to non-systems contracts | ( | ) | ( | ) | ||||
| $ | ( | ) | $ | ( | ) | |||
| Included in accompanying consolidated balance sheets under the following captions (in thousands): | ||||||||
| Contract assets | $ | $ | ||||||
| Contract liabilities | $ | $ | ||||||
Of
the contract liability balances at December 31, 2023 and December 31, 2022, $
| F-16 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 4 - Inventories
Inventories as of December 31 consist of (in thousands):
| 2024 | 2023 | |||||||
| Raw materials | $ | $ | ||||||
| Work-in-process | ||||||||
| Finished goods | ||||||||
| Total | $ | $ | ||||||
Included
in inventories are finished goods and raw materials related to PVT 150 systems that were purchased and built, respectively, in anticipation
of future orders. During the year ended December 31, 2024, the Company recorded a non-cash charge to reduce the net realizable value
of such inventory by approximately $
As
of December 31, 2024, the net amount of PVT 150 systems inventory is approximately $
Note 5 – Property, Plant and Equipment
Major classes of property, plant and equipment consist of the following as of December 31 (in thousands):
| 2024 | 2023 | |||||||
| Land | $ | $ | ||||||
| Buildings and improvements | ||||||||
| Machinery and equipment | ||||||||
| Construction in progress | ||||||||
| Totals at cost | ||||||||
| Less: accumulated depreciation | ( | ) | ( | ) | ||||
| Property, plant and equipment, net | $ | $ | ||||||
Machinery and equipment also include furniture and fixtures and software.
Depreciation
expense was $
| F-17 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 5 – Property, Plant and Equipment (continued)
The Company entered into an agreement with the Town of Islip Industrial Development Agency (Islip IDA) in July 2021 under which the Company was granted tax incentives whereby the Company agreed to make payments in lieu of all real estate taxes and assessments (PILOT payments). The agreement requires the Company to maintain certain employment levels at its Central Islip, New York facility. The agreement provides for the Islip IDA to recapture tax incentives provided to the Company in certain circumstances. Any recapture of such tax benefits could have a material adverse effect on the Company’s financial position and future results of operations and cash flows.
Note 6 – Accrued Expenses
Accrued expenses consist of the following as of December 31 (in thousands):
| 2024 | 2023 | |||||||
| Accrued wages and benefits | $ | $ | ||||||
| Accrued vacation | ||||||||
| Accrued material purchases | ||||||||
| Other | ||||||||
| Total accrued expenses | $ | $ | ||||||
Note 7 – Long-term Debt
Long-term debt as of December 31 consist of the following (in thousands, except percentages and amounts in notes):
| 2024 | 2023 | |||||||
| Equipment loan payable in monthly repayments of $ | $ | $ | ||||||
| Less: current maturities | ||||||||
| Long-term debt, net of current maturities | $ | $ | ||||||
In
September 2022, the Company entered into a loan agreement to fund the acquisition of equipment in the amount of $
| F-18 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 7 – Long-term Debt (continued)
Future maturities of long-term debt as of December 31, 2024 are as follows (in thousands):
| 2024 | $ | |||
| 2025 | ||||
| 2026 | ||||
| Total | $ |
| 2024 | 2023 | |||||||
| Basic weighted average shares outstanding | ||||||||
| Effect of potentially dilutive share-based awards | ||||||||
| Diluted weighted average shares outstanding | ||||||||
At December 31, 2024 and 2023, all stock options and unvested restricted stock were not included in the computation of diluted earnings per share because their effect was antidilutive.
Note 9 – Income Taxes
Loss before income taxes are as follows:
| 2024 | 2023 | |||||||
| Domestic | $ | ( | ) | ( | ) | |||
| Foreign | ( | ) | ||||||
| Total | $ | ( | ) | $ | ( | ) | ||
| F-19 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 9 – Income Taxes (continued)
The expense/(benefit) for income taxes for the years ended December 31 includes the following (in thousands):
| 2024 | 2023 | |||||||
| Current: | ||||||||
| Federal | $ | $ | ( | ) | ||||
| State | ||||||||
| Total current tax provision | ( | ) | ||||||
| Deferred: | ||||||||
| Federal | ||||||||
| State | ||||||||
| Total deferred tax provision | ||||||||
| Income tax expense (benefit) | $ | $ | ( | ) | ||||
The reconciliation of the federal statutory income tax rate to our effective tax rate for the years ended December 31 is as follows (in thousands):
| 2024 | 2023 | |||||||
| Expected provision at federal statutory tax rate at | $ | ( | ) | $ | ( | ) | ||
| Increase in valuation allowance | ||||||||
| State and local taxes | ( | ) | ||||||
| Federal research and development credits | ( | ) | ||||||
| Non-deductible expenses | ||||||||
| Disposition of Tantaline | ||||||||
| Other | ||||||||
| Income tax expense (benefit) | $ | $ | ( | ) | ||||
| F-20 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 9 – Income Taxes (continued)
The tax effects of temporary differences giving rise to significant portions of the net deferred taxes as of December 31 are as follows (in thousands):
| 2024 | 2023 | |||||||
| Deferred income tax assets: | ||||||||
| Net operating loss carryforwards | $ | $ | ||||||
| R&D tax credit carryforwards | ||||||||
| Compensation costs | ||||||||
| Vacation accrual | ||||||||
| Intangible assets | ||||||||
| Capitalized research and development | ||||||||
| Other items | ||||||||
| Deferred income tax assets | ||||||||
| Less: valuation allowance | ( | ) | ( | ) | ||||
| Deferred income tax assets, net of valuation allowance | ||||||||
| Deferred incomes tax liability: | ||||||||
| Property, plant and equipment | ( | ) | ( | ) | ||||
| Prepaid expenses | ( | ) | ( | ) | ||||
| Deferred income tax asset, net | $ | $ | ||||||
In assessing the realizability of deferred tax assets, management considers whether it is more likely than not that the deferred tax assets will be realized. The ultimate realization of deferred tax assets is based on the assessment of available positive and negative evidence to estimate whether sufficient future taxable income will be generated to permit the utilization of existing deferred tax assets. The Company considered all positive and negative evidence when determining the amount of the net deferred tax assets that are more likely than not to be realized. This evidence includes, but is not limited to, historical earnings, scheduled reversal of taxable temporary differences, tax planning strategies and projected future taxable income A significant piece of objective negative evidence evaluated was the cumulative loss incurred over the prior three-year period ended December 31, 2024. Such objective evidence limits the ability to consider subjective evidence such as our projections for future growth. Based on this assessment, we maintained a full valuation allowance against our net deferred tax assets as of December 31, 2024, and 2023. If these estimates and assumptions change in the future, we may be required to reduce our existing valuation allowance resulting in less income tax expense.
For
the year ended December 31, 2024, the valuation allowance increased by approximately $
| F-21 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 9 – Income Taxes (continued)
At
December 31, 2024, the Company had $
The
Company applies the applicable authoritative guidance which prescribes a comprehensive model for the manner in which a company should
recognize, measure, present and disclose in its financial statements all material uncertain tax positions that the Company has taken
or expects to take on a tax return. As of December 31, 2024 and 2023, the Company had
The
Company files federal income tax returns and income tax returns in various state and local tax jurisdictions.
The
Inflation Reduction Act (“IRA”) and Chips and Science Act (“CHIPS Act”) were both enacted in August 2022. The
IRA introduced new provisions including a
Note 10 – Employee Retention Credit
During
2022, the Company conducted an analysis as to whether it was entitled to employee retention credits (“ERC”) under the CARES
Act as amended by the Taxpayer Certainty and Disaster Tax Relief Act of 2020 and the American Plan Act of 2021. Based on the analysis,
the Company determined that it was entitled to an ERC of approximately $
| F-22 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
A summary of the Company’s Share Incentive Plans are as follows:
2007 Share Incentive Plan
On December 12, 2007, shareholders approved the Company’s 2007 Share Incentive Plan (“2017 Incentive Plan”), in connection therewith, shares of the Company’s common stock are reserved for issuance pursuant to options or restricted stock that may be granted under the 2017 Incentive Plan through December 12, 2017. The Plan expired in December 2017. As of December 31, 2024, there were options outstanding under this plan.
2016 Share Incentive Plan
On December 9, 2016, shareholders approved the Company’s 2016 Share Incentive Plan (“2016 Incentive Plan”), in connection therewith, shares of the Company’s common stock are reserved for issuance pursuant to options or restricted stock that may be granted under the 2016 Incentive Plan through December 9, 2026. As of December 31, 2024, there were options outstanding under this plan.
2022 Share Incentive Plan
On July 14, 2022, shareholders approved the Company’s 2022 Share Incentive Plan (“2022 Incentive Plan”), in connection therewith, shares of the Company’s common stock are reserved for issuance pursuant to options or restricted stock that may be granted under the 2022 Incentive Plan through July 14, 2032. As of December 31, 2024, there were options outstanding under this plan.
Under the 2016 and 2022 Share Incentive Plans, the purchase price of the common stock under each option plan shall be determined by the Committee, provided, however, that such purchase price shall not be less than the fair market value of the shares on the date such option is granted. The stock options generally expire to after the date of grant.
As of December 31, 2024, there were shares available for grant under the 2016 Equity Incentive Plan and shares available for grant under the 2022 Equity Incentive Plan.
| F-23 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 11 – Stock-Based Compensation (continued)
The Company recorded stock-based compensation of $ million and $ million for the years ended December 31, 2024 and 2023, respectively, that were included in the following line items in our Consolidated Statements of Operations (in thousands):
| 2024 | 2023 | |||||||
| Cost of revenue | $ | $ | ||||||
| Research and development | ||||||||
| Selling | ||||||||
| General and administrative | ||||||||
| Total stock-based compensation expense | $ | $ | ||||||
Stock-based compensation expense in both years included approximately $ million related to restricted stock awards pursuant to a Director Compensation plan discussed below. The Company recognizes forfeitures of stock awards as they occur.
For the year ended December 31, 2024, the Company granted stock options, vesting % per year over four years, with a life. The Company determined the fair value of stock options granted during the year ended December 31, 2024 is based upon weighted average assumptions as provided below.
| Stock price | $ | |||
| Exercise price | $ | |||
| Dividend yield | % | |||
| Expected volatility | % | |||
| Risk-free interest rate | % | |||
| Expected life (in years) |
The expected life is the number of years the Company estimates that the awards will be outstanding based on the simplified method that considers the vesting period and contractual period of the option. The expected volatility is measured using historical daily price changes of the Company’s common stock over the respective expected term. The Company has of outstanding stock options under the three plans at December 31, 2024.
| F-24 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 11 – Stock-Based Compensation (continued)
| Weighted | ||||||||
Awards (in Shares) | Average Exercise Price | |||||||
| Outstanding at December 31, 2022 | $ | |||||||
| Granted | ||||||||
| Expired / cancelled | ( | ) | ||||||
| Exercised | ( | ) | ||||||
| Outstanding at December 31, 2023 | ||||||||
| Granted | ||||||||
| Expired / cancelled | ( | ) | ||||||
| Exercised | ||||||||
| Outstanding at December 31, 2024 | ||||||||
At December 31, 2024 and 2023, stock options to purchase and , respectively, shares of common stock were exercisable.
| Options Outstanding | Options Exercisable | |||||||||||||||||||||||||||||
| Weighted | Weighted | Weighted | ||||||||||||||||||||||||||||
| Average | Average | Average | ||||||||||||||||||||||||||||
| Exercise | Number | Remaining | Exercise | Intrinsic | Number | Exercise | Intrinsic | |||||||||||||||||||||||
| Price Range | Outstanding | Contractual | Price | Value | Exercisable | Price | Value | |||||||||||||||||||||||
| $ | - | $ | $ | $ | $ | |||||||||||||||||||||||||
| $ | - | $ | $ | $ | $ | |||||||||||||||||||||||||
| $ | - | $ | $ | $ | $ | |||||||||||||||||||||||||
| $ | - | $ | $ | $ | $ | |||||||||||||||||||||||||
As of December 31, 2024, there was $ million of unrecognized compensation costs related to stock options expected to be recognized over a weighted average period of years.
Restricted Stock Awards
Pursuant to the Director Compensation plan approved on October 11, 2021, each of the five independent directors is entitled to compensation for an annual equity retainer in the amount of $ per director, to be automatically granted on the date of the Company’s annual meeting of shareholders.
| F-25 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 11 – Stock-Based Compensation (continued)
| Weighted | ||||||||
| Average Grant | ||||||||
| Shares of | Date Fair | |||||||
| Restricted Stock | Value | |||||||
| Unvested outstanding at January 1, 2023 | $ | |||||||
| Granted | ||||||||
| Vested | ( | ) | ||||||
| Forfeited or cancelled | ||||||||
| Unvested outstanding at December 31, 2023 | ||||||||
| Granted | ||||||||
| Vested | ( | ) | ||||||
| Forfeited or cancelled | ||||||||
| Unvested outstanding at December 31, 2024 | $ | |||||||
The fair value of the restricted stock awards is recorded as stock-based compensation expense over the vesting period and totaled $ million for the both years ending December 31, 2024 and 2023, respectively.
Note 12 – Defined Contribution Plan
The Company maintains a 401(k) Plan for the benefit of all eligible employees. All employees as of the effective date of the 401(k) Plan became eligible. An employee is eligible to become a participant after three months of continuous service.
Participants may elect to contribute from their compensation any amount up to the maximum deferral allowed by the Internal Revenue Code. Employer contributions are optional.
Effective
July 1, 2022, the Company implemented a matching contribution of
| F-26 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 13 - Reportable Segments
The
Company has determined that it has
| ● | CVD Equipment – manufactures chemical vapor deposition, physical vapor transport and thermal process equipment. |
| ● | SDC - manufactures ultra-high purity gas and chemical delivery control systems. |
| ● | MesoScribe - provided electronic printing services and products (heaters, antennas, and sensors). |
Both CVD Equipment and SDC also sell spares and parts and provide services related to the equipment each segment sells. One other business, Tantaline, did not meet the quantitative threshold for separate reporting and has been reflected as “Other” below.
The chief operating decision maker (“CODM”) of the Company is the Company’s chief executive officer. The CODM assesses performance and decides how to allocate resources, including employees, financial or capital resources, based on segment net income (loss). The CODM considers actual-to-actual variances on a quarterly basis when making decisions about allocating capital and other resources to the segments and to assess the performance for each segment.
Financial results for the reportable segments and other business are prepared on a basis consistent with the internal disaggregation of financial information to assist the CODM is making internal operating decisions.
Certain income and expenses are excluded from segment net income (loss) and included in the unallocated amounts in the reconciliation of reportable segment net income (loss) to net loss. These items are not used by the CODM in allocating resources or evaluating the results of the segments and include the following: corporate expenses consisting of employment costs of executives, finance, information technology and human resources; board of director fees; professional fees; shareholder and investor relations expense; directors’ and officers’ insurance; interest income and income tax expense. Segment income (loss) from operations may not be consistent with measures used by other companies.
| F-27 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 13 - Reportable Segments (continued)
The following provides segment information as described below (in thousands):
| For the year ended December 31, 2024 | ||||||||||||||||
| CVD | SDC | MesoScribe | Total | |||||||||||||
| Segment revenue | $ | $ | $ | $ | ||||||||||||
| Less: | ||||||||||||||||
| Cost of revenue | ||||||||||||||||
| Research & development | ||||||||||||||||
| Selling | ||||||||||||||||
| General & administrative | ||||||||||||||||
| Gain on sales of equipment | ( | ) | ( | ) | ( | ) | ||||||||||
| Other income | ( | ) | ( | ) | ||||||||||||
| Interest expense | ||||||||||||||||
| Segment net income (loss) | $ | ( | ) | $ | $ | $ | ||||||||||
| Segment assets | $ | $ | $ | $ | ||||||||||||
| Capital expenditures | $ | $ | $ | $ | ||||||||||||
| Depreciation & amortization | $ | $ | $ | $ | ||||||||||||
| For the year ended December 31, 2023 | ||||||||||||||||
| CVD | SDC | MesoScribe | Total | |||||||||||||
| Segment revenue | $ | $ | $ | $ | ||||||||||||
| Less: | ||||||||||||||||
| Cost of revenue | ||||||||||||||||
| Research & development | ||||||||||||||||
| Selling | ||||||||||||||||
| General & administrative | ||||||||||||||||
| Impairment charge | ||||||||||||||||
| Other income | ( | ) | ( | ) | ||||||||||||
| Interest expense | ||||||||||||||||
| Segment net income (loss) | $ | ( | ) | $ | $ | $ | ( | ) | ||||||||
| Segment assets | $ | $ | $ | $ | ||||||||||||
| Capital expenditures | $ | $ | $ | $ | ||||||||||||
| Depreciation & amortization | $ | $ | $ | $ | ||||||||||||
| F-28 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 13 - Reportable Segments (continued)
The following table presents a reconciliation of revenue of reportable segments to consolidated revenue (in thousands):
| Year ended December 31, | ||||||||
| 2024 | 2023 | |||||||
| Revenue of reportable segments | $ | $ | ||||||
| Other - Tantaline | ||||||||
| Intersegment revenue | ( | ) | ( | ) | ||||
| Consolidated total revenue | $ | $ | ||||||
Intersegment revenues are determined based on similar product sales to external customers of the Company.
The following table presents a reconciliation of net income (loss) of reportable segments to consolidated net loss (in thousand):
| Year ended December 31, | ||||||||
| 2024 | 2023 | |||||||
| Net income (loss) of reportable segments | $ | $ | ( | ) | ||||
| Unallocated amounts: | ||||||||
| Corporate expenses | ( | ) | ( | ) | ||||
| Other - Tantaline | ( | ) | ||||||
| Interest income | ||||||||
| Income tax (expense) benefit | ( | ) | ||||||
| Consolidated net loss | $ | ( | ) | $ | ( | ) | ||
The following table presents a reconciliation of total assets of reportable segments to consolidated total assets (in thousands):
| Year ended December 31, | ||||||||
| 2024 | 2023 | |||||||
| Total assets of reportable segments | $ | $ | ||||||
| Unallocated amounts: | ||||||||
| Cash equivalents | ||||||||
| Other current assets | ||||||||
| Consolidated total assets | $ | $ | ||||||
| F-29 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 13 - Reportable Segments (continued)
The following table presents a revenue by geographic area (in thousands):
| Year ended December 31, | ||||||||
| 2024 | 2023 | |||||||
| United States | $ | $ | ||||||
| North America, excluding US | ||||||||
| Europe, Middle East and Africa | ||||||||
| Asia-Pacific | ||||||||
| Consolidated total revenue | $ | $ | ||||||
For geographic reporting, revenues are attributed to the location in which in the customer facility is located. All of the Company’s long-lived assets are located in the United States.
Note 14 – MesoScribe and Tantaline
MesoScribe
On
August 8, 2023, the Company entered into a Purchase and License Agreement (the “Agreement”) with a third-party. Pursuant
to the Agreement, the Company sold certain proprietary equipment relating to its plasma spray technology and material deposition system
and granted a non-exclusive license to use certain of the Company’s related intellectual property as more fully described in the
Agreement, for an aggregate adjusted purchase price of $
The
Company received payments under the Agreement in the amount of $
The
Company fulfilled remaining orders for MesoScribe products during 2024 at which time it ceased operations of MesoScribe and recorded
a $
The
revenues and net income of MesoScribe were $
The
revenues and net income of MesoScribe were $
| F-30 |
CVD EQUIPMENT CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
December 31, 2024 and 2023
Note 14 – MesoScribe and Tantaline (continued)
The
total assets and total liabilities of the MesoScribe subsidiary were $
Tantaline
On
May 26, 2023, the Company sold its Tantaline subsidiary located in Nordborg, Denmark in exchange for a nominal amount at closing and
an earn-out provision based on any net income that Tantaline may earn during the five-year period ending December 31, 2027. The Company
recorded a loss of $
Including
the loss on disposition of $
Note 15 – Risks and Uncertainties
The Company currently operates in a challenging economic environment as the global economy continues to confront the remaining impacts from the pandemic, geopolitical conflicts, inflationary pressures, and adverse supply chain disruptions. The specific impacts on the Company have included:
| ● | Significant geopolitical developments across Europe and Asia (including the war in Ukraine) have and may continue to restrict the Company’s ability to procure raw materials and components such as nickel and integrated circuits, as well as impact the Company’s ability to sell its products into China, Russia and other Eastern European and Asian regions. |
| ● | Supply chain disruptions have led to much longer lead times to acquire raw materials for production and has led to inflationary pressures in both materials and labor. These supply chain disruptions have impacted the Company’s ability to recognize revenue timelier as it delays the Company’s manufacturing processes. |
While management has initiated actions to mitigate the potential negative impacts to its revenue and profitability, the Company is unable to predict the impact that the above uncertainties may have on its future results of operations and cash flows.
| F-31 |