SEC Form 10-K filed by Espey Mfg. & Electronics Corp.

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D. C. 20549

FORM 10-K

☒ANNUAL Report Pursuant to Section 13 or 15 (d) of the Securities Exchange Act of 1934

For the fiscal year ended June 30, 2023

OR

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Commission File Number 1-4383

ESPEY MFG. & ELECTRONICS CORP.

(Exact name of registrant as specified in its charter)

233 Ballston Avenue, Saratoga Springs, New York 12866

(Address of principal executive offices)

518-584-4100

(Registrant's telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act 

Securities registered pursuant to Section 12 (g) of the Act

None 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. ☐ Yes     ☒ No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. ☐ Yes     ☒ No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15 (d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. ☒ Yes     ☐ No

Indicate by check mark whether the registrant has submitted electronically every Interactive Date File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). ☒ Yes     ☐ No

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company:

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b) ☐

Indicate by check mark whether the registrant is a shell company. ☐ Yes     ☒ No

The aggregate market value of the voting stock held by non-affiliates of the registrant was $27,145,853 based upon the closing sale price of $14.20 on the NYSE American on December 31, 2022.

At September 19, 2023 there were 2,706,633 shares outstanding of the registrant's Common stock, $.33-1/3 par value.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant's definitive proxy statement relating to the 2023 Annual Meeting of Shareholders, to be filed with the Securities and Exchange Commission, are incorporated by reference in Part III, Items 10 through 14 on Form 10-K as indicated herein.

Forward-Looking Statements

This Annual Report on Form 10-K contains forward-looking statements that are based on management’s expectations, estimates, projections and assumptions. Words such as “expects,” “anticipates,” “plans,” “believes,” “scheduled,” “estimates” and variations of these words and similar expressions are intended to identify forward-looking statements. Forward-looking statements are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995, as amended. These statements are not guarantees of future performance and involve certain risks and uncertainties that are difficult to predict. Therefore, actual future results and trends may differ materially from what is forecast in forward-looking statements due to a variety of factors, including, without limitation:

All forward-looking statements speak only as of the date of this report or, in the case of any document incorporated by reference, the date of that document. All subsequent written and oral forward-looking statements attributable to the Company or any person acting on the Company’s behalf are qualified by the cautionary statements in this section. The Company does not undertake any obligation to update or publicly release any revisions to forward-looking statements to reflect events, circumstances or changes in expectations after the date of this report.

PART I

General

Espey Mfg. & Electronics Corp. (“Espey”) is a power electronics design and original equipment manufacturing (OEM) company with a long history of developing and delivering highly reliable products for use in military and severe environment applications. Design, manufacturing, and testing is performed in our 150,000+ square foot facility located at 233 Ballston Ave., Saratoga Springs, New York. Espey is classified as a “smaller reporting company” for purposes of the reporting requirements under the Securities Exchange Act of 1934, as amended. Espey’s common stock is publicly-traded on the NYSE American under the symbol “ESP.”

Espey began operations after incorporation in New York in 1928. We strive to remain competitive as a leader in high power energy conversion and transformer solutions through the design and manufacture of new and improved products by using advanced and “cutting edge” electronics technologies.

Espey is ISO 9001:2015 and AS9100:2016 certified. Our primary products are power supplies, power converters, filters, power transformers, magnetic components, power distribution equipment, UPS systems, antennas and high power radar systems. The applications of these products include AC and DC locomotives, shipboard power, shipboard radar, airborne power, ground-based radar, and ground mobile power.

Espey’s services include design and development to specification, build to specifications provided by the customer “build to print”, design services, design studies, environmental testing services, metal fabrication, painting services, and development of automatic testing equipment. Espey is vertically integrated, meaning that the Company produces individual components (including inductors), populates printed circuit boards, fabricates metalwork, paints, wires, qualifies, and fully tests items, mechanically, electrically and environmentally, in house. Portions of the manufacturing and testing process are subcontracted to vendors from time to time.

In fiscal years ended June 30, 2023 and 2022, the Company's total sales were $35,592,323 and $32,104,774, respectively. Sales to five domestic customers accounted for 23%, 18%, 16%, 13% and 11%, respectively, of total sales in 2023. Sales to four domestic customers accounted for 17%, 16%, 14% and 11%, respectively, of total sales in 2022. This concentration level presents significant risk. A loss of one of these customers or programs related to these customers could significantly impact the financial performance of the Company. Historically, a small number of customers have accounted for a large percentage of the Company’s total sales in any given fiscal year. In some instances, our sales may include shipments to more than one business unit of a particular customer.

Export sales in fiscal years 2023 and 2022 were approximately $549,510 and $1,644,000, respectively. The decrease is primarily due to the decrease in power supply sales resulting from the timing of contractual delivery schedules.

Sources of Raw Materials

The Company has at least two potential sources of supply for a majority of its raw materials. However, certain components used in its products are available from a single or a limited number of sources. Despite the risk associated with single or limited source suppliers, the benefits of higher quality goods and timely delivery minimize and often limit any potential risk and can eliminate problems with part failures during production. At times, replacements are required to cover obsolete parts.

The growth and continuing demand in the power electronics industry across multiple manufacturing sectors, coupled with resulting supply chain disruptions from the effects of global events, has created volatility and unpredictability in the availability of certain electronic components and, in some cases, continues to create industry shortages. These shortages will likely continue to impact our ability to support our customer’s schedule demands, as lead times for these components have, in some instances, increased from readily available to waiting times of nearly a year or more. We continue to work with our customers to mitigate any adverse impact upon our ability to service their requirements. These issues, if they persist, may cause us to miss projected delivery dates.

The President of the United States continued the imposition of tariffs on steel and aluminum imports from various countries in 2022. Although we are not currently experiencing any significant financial or raw material sourcing issues resulting from the product tariffs, the Company cannot provide any assurance that the existing tariffs, the potential of additional tariffs, and the associated volatility arising from the Administration’s foreign trade policies, will not have a negative impact on our future earnings by increasing our raw material prices and augmenting the lead time for the availability of raw materials. From time to time the Company must identify parts to replace parts which are no longer produced.

Sales Backlog

The total backlog at June 30, 2023 was approximately $83.6 million compared to approximately $76.8 million at June 30, 2022. The Company’s total backlog represents the estimated remaining sales value of work to be performed under firm contracts. The funded portion of this backlog at June 30, 2023 was approximately $83.5 million. This includes items that have been authorized and appropriated by Congress and/or funded by the customer. The unfunded backlog at June 30, 2023 was approximately $32 thousand and represents a small amount under one firm multi-year order from a single customer. While there is no guarantee that future budgets and appropriations will provide funding for individual programs, management has included in unfunded backlog only those programs that it believes are likely to receive funding based on discussions with customers and program status. The unfunded backlog at June 30, 2022 was approximately $0.4 million and represented two firm multi-year orders from a single customer for which funding had not yet been appropriated by Congress and/or funded by our customer. Contracts are subject to modification, change or cancellation, and the Company accounts for these changes as they are probable and estimable. The Company evaluates the impact of any scope modifications and will adjust reserves as information is known and estimable.

It is presently anticipated that a minimum of $39.5 million of orders comprising the June 30, 2023 backlog will be filled during the fiscal year ending June 30, 2024. The minimum of $39.5 million does not include any shipments which may be made against orders received subsequently to the fiscal year ending June 30, 2023. The estimate of the June 30, 2023 backlog to be shipped in fiscal year 2024 is subject to future events, which may cause the amount of the backlog actually shipped to differ from such estimate.

Marketing and Competition

The Company markets its products primarily through its own direct sales organization and through outside sales representatives. Business is solicited from large industrial manufacturers and defense companies, the government of the United States, foreign governments and major foreign electronic equipment companies. Espey is also on the eligible list of contractors with the United States Department of Defense. We pursue opportunities for prime contracts directly with the Department of Defense and are generally automatically solicited by Department of Defense procurement agencies for their needs falling within the major classes of products produced by the Company. Espey contracts with the Federal Government under cage code 20950 as Espey Mfg. & Electronics Corp.

There is competition in all classes of products manufactured by the Company ranging from divisions of the largest electronic companies, to many small companies. The Company's sales do not represent a significant share of the industry's market for any class of its products. The principal methods of competition for electronic products of both a military and industrial nature include, among other factors, price, product performance, the experience of the particular company and history of its dealings in such products.

Our business is not seasonal. However, the concentration of our business in the rail industry, and in equipment for military applications and industrial applications and our customer concentrations expose us to on-going associated risks. These risks include, without limitation, requirements for power supplies in the rail industry, dependence on appropriations from the United States Government and the governments of foreign nations, program allocations, the potential of governmental termination of orders for convenience, and the general strength of the industry sectors in which our customers transact business.

Future procurement needs supporting the military and the rail industry continue to drive competition. Many of our competitors have invested, and they continue to invest aggressively in upfront product design costs and accept lower profit margins as a strategic means of maintaining existing business and enhancing market share. This continues to put pressure on the pricing of our current products and has lowered our profit margins on some of our new business. In order to compete effectively for new business, in some cases we have invested in upfront design costs, thereby reducing initial profitability as a means of procuring new long-term programs. As part of our strategy, we adjust our pricing in order to achieve a balance which enables us both to retain repeat programs while being more competitive in bidding on new programs.

Our sales strategy includes identifying and obtaining multiple new engineering design and development contracts in any given fiscal year to ensure optimal utilization of our engineering personnel in addition to securing follow-on production awards for product previously designed in-house, as well as, build to print opportunities. The Company targets those programs and opportunities which will generate future longer-term production tails in ensuing years. From time to time, we accept work associated with engineering design studies. While unlikely to result in near-term follow-on orders, this positions us competitively on future awards and expands our engineering team’s skillset.

Research and Development

Some of the Company's engineers and technicians spend varying amounts of time on either the development of new products or improvements to existing products. A majority of the resulting costs we incur relate to research that is required to support a request for quotation from a customer product-specific need usually associated with stringent size and weight requirements. We do very little pure research as our business primarily is driven by customer product needs and custom product development with some customer funding. The Company's expenditures for research and development were approximately $65,427 and $32,362 in fiscal year 2023 and 2022, respectively.

Employees

The Company had 153 employees as of August 31, 2023. Approximately 35% of the employees are represented by the International Brotherhood of Electrical Workers. The current collective bargaining agreement expires on June 30, 2025. Relations with the Union are considered good.

Government Regulations

Compliance with federal, state and local laws regulating the discharge of materials into the environment, or otherwise relating to the protection of the environment, did not in fiscal year 2023, and the Company believes will not in fiscal year 2024, have a material effect upon the capital expenditures, net income, or competitive position of the Company.

The Company’s U.S. Government contract and subcontract orders are funded by government budgets, which operate on an October-to-September fiscal year. Normally, in February of each year, the President of the United States presents to Congress a proposed budget for the upcoming fiscal year. This budget includes recommended appropriations for every federal agency and is the result of months of policy and program reviews throughout the executive branch. From February through September of each year, the appropriations and authorization committees of Congress review the President’s budget proposals and establish the funding levels for the upcoming fiscal year in appropriations and authorization legislation. Once these levels are enacted into law, the Executive Office of the President administers the funds to the agencies.

There are two primary risks associated with this process. First, the process may be delayed or disrupted because of congressional schedules, negotiations over funding levels for programs or unforeseen world events, which could, in turn, alter the funding for a program or contract. Second, funding for multi-year contracts can be changed by future appropriations, which could affect the timing of funds, schedules and program content.

Also, our international sales are denominated in United States dollars. Consequently, a strengthening of the United States dollar against foreign currencies could increase the price in local currencies of our products in foreign markets and make our products relatively more expensive than competitors’ products.

U.S. Government Defense Contracts and Subcontracts

Generally, U.S. Government contracts are subject to procurement laws and regulations. Some of the Company’s contracts are governed by the Federal Acquisition Regulation (FAR), which lays out uniform policies and procedures for acquiring goods and services by the U.S. Government, and agency-specific acquisition regulations that implement or supplement the FAR. For example, the Department of Defense implements the FAR through the Defense Federal Acquisition Regulation (DFAR).

The FAR also contains guidelines and regulations for managing a contract after award, including conditions under which contracts may be terminated, in whole or in part, at the government’s convenience or for default. If a contract is terminated for the convenience of the government, a contractor is entitled to receive payments for its allowable costs and, in general, the proportionate share of fees or earnings for the work done. If a contract is terminated for default, the government generally pays for only the work it has accepted. These regulations also subject the Company to financial audits and other reviews by the government of its costs, performance, accounting and general business practices relating to its contracts, which may result in adjustment of the Company’s contract-related costs and fees.

Cyber or Other Security Threats or Other Disruptions

We routinely experience cybersecurity threats in the form of unauthorized attempts to gain access to our sensitive information. The threats we face vary from attacks common to most industries to more advanced attacks with the specific objective of accessing national security information. We believe our threat detection and mitigation processes and procedures are above adequate. The processes and procedures in place are designed to detect, manage and prevent current threats and respond quickly to detect and mitigate new threats. To ensure our systems remain protected, we continually assess and acquire, as appropriate, new available technology and provide employee training to utilize effectively our technological assets. Prior cyberattacks directed at us have not had a material impact on our financial results nor restricted us from being awarded contracts from other defense companies or directly from the United States Department of Defense. However, we can provide no assurance that the occurrence of any future event would not adversely affect our internal operations, our reputation and competitive advantage, and our future financial results.

The Company's entire operation, including administrative, manufacturing and engineering facilities, is located in Saratoga Springs, New York.

The Saratoga Springs plant, which the Company owns, consists of various adjoining buildings on a 22 acre site, approximately eight acres of which is unimproved. The property is not subject to mortgage indebtedness or any other material encumbrance. The plant has a sprinkler system throughout and contains approximately 151,000 square feet of floor space, of which 90,000 is used for manufacturing, 24,000 for engineering, 33,000 for shipping and climatically secured storage, and 4,000 for offices. The offices, engineering and some manufacturing areas are air-conditioned. In addition to assembly and wiring operations, the plant includes facilities for varnishing, potting, impregnation and spray-painting operations. The manufacturing operation also includes a complete machine shop, with welding and sheet metal fabrication facilities adequate for substantially all of the Company's current operations. Besides normal test equipment, the Company maintains a sophisticated on-site environmental test facility. In addition to meeting all of the Company's in-house needs, the machine shop and environmental facilities are available to other companies on a contract basis.

We are party to various litigation matters and claims arising from time to time in the ordinary course of business.  While the results of such matters cannot be predicted with certainty, we believe that the final outcome of such matters will not have a material adverse effect on our business, financial condition, results of operations or cash flows.  Currently, there are no matters pending.

Not applicable

PART II

Price Range of Common Stock

The table below shows the range of high and low prices for the Company's common stock on the NYSE American (symbol "ESP"), the principal market for trading in the common stock, for each quarterly period for the last two fiscal years ended June 30:

Holders

The approximate number of holders of record of the common stock was 58 on September 18, 2023 according to records of the Company's transfer agent. Included in this number are shares held in "nominee" or "street" name and, therefore, the number of beneficial owners of the common stock is believed to be substantially in excess of the foregoing number.

Dividends

Effective March 13, 2023, the Company reinstated payment of a quarterly dividend. The Company had suspended dividend payments effective March 9, 2021. The Company paid regular cash dividends on common stock of $0.20 per share for the fiscal year ended June 30, 2023 and paid no cash dividends for the fiscal year ended June 30, 2022. Our Board of Directors assesses the Company’s dividend policy periodically. There is no assurance that the Board of Directors will maintain the amount of the regular cash dividend during any future years.

During fiscal year 2023, the Company did not sell any of its common stock to the Trustees of The Espey Mfg. & Electronics Corp. Employee Stock Ownership Plan Trust (the “ESOP”).

The Company did not make any open market purchases of equity securities in the fiscal year 2023 fourth quarter.

The following table sets forth information as of June 30, 2023 with respect to compensation plans under which equity securities of the Company may be issued.

Equity Compensation Plan Information

Business Outlook

Management expects revenues in fiscal year 2024 to be higher than revenues during fiscal year 2023 and expects net income per share to be higher in fiscal 2024 as compared to the net income per share realized during fiscal year 2023.

We successfully navigated through many of the issues which constrained our ability to recognize revenue in fiscal 2023 related to select engineering design contracts and build to print contracts which relied upon customer-owned designs to execute. While supply chain disruptions, including extended lead times and part obsolescence, continue to affect our production, we are better able to manage these factors and adequately factor lead times into internal planning schedules and new customer quotations. Inflationary costs are expected to continue but are not expected to have a significant impact on operating income in fiscal year 2024. Successful conversion of engineering program backlog into sales is largely dependent on the execution and completion of our engineering design efforts. It is not uncommon to experience technical or scheduling delays which arise from time to time as a result of, among other reasons, design complexity, the availability of personnel with the requisite expertise, and the requirements to obtain customer approval at various milestones.  Cost overruns which may arise from technical and schedule delays and increased raw material costs could negatively impact the timing of the conversion of backlog into sales, or the profitability of such sales. Engineering programs in both the funded and unfunded portions of the current backlog aggregate $8.4 million.

We made significant improvement in filling many of our open positions in the second half of the year. The labor workforce remains stable. Management continues to closely monitor workforce labor requirements to support our sales backlog and planned delivery schedules. Longer time-to-hire challenges remain for certain positions due to specific skillsets required for those positions and the fact fewer workers, in general, are seeking employment. Unemployment rates in the local geographic region are lower than the national average. Where possible, the Company continues to offer on-the-job training and when necessary continues to recruit personnel outside the local region. Combined with supply chain constraints, future unforeseen labor disruptions could delay shipments and result in missing our backlog fulfillment projections and recognizing lower operating income.

The Company currently expects new orders in fiscal 2024 to be greater than those received in fiscal year 2023. As market factors including competition and product costs impact gross profit margins, management will continue to evaluate our sales strategy, employment levels, and facility costs.

During fiscal year 2023, the Company received approximately $42.4 million in new orders. Our total backlog at June 30, 2023 was approximately $83.6 million, as compared to approximately $76.8 million at June 30, 2022. Currently, we expect a minimum of $39.5 million of orders comprising the June 30, 2023 backlog will be filled during the fiscal year ending June 30, 2024. This $39.5 million will be supplemented by shipments which may be made against orders received during the 2024 fiscal year. In addition to the backlog, the Company currently has outstanding opportunities representing in excess of $69 million in the aggregate as of August 31, 2023, for both repeat and new programs. The outstanding quotations encompass various new and previously manufactured power supplies, transformers, and subassemblies. However, there can be no assurance that the Company will acquire any of the anticipated orders described above, many of which are subject to allocations of the United States defense spending and factors affecting the defense industry.

Our sales strategy includes identifying and obtaining multiple new engineering design and development contracts in any given fiscal year to ensure optimal utilization of our engineering personnel in addition to securing follow-on production awards for product previously designed in-house, as well as, build to print opportunities. The Company targets those programs and opportunities which will generate future longer-term production tails in ensuing years. From time to time, we accept work associated with engineering design studies. While unlikely to result in near-term follow-on orders, this positions us competitively on future awards and expands our engineering team's skillset.

Management continues to pursue opportunities with current and new customers with an overall objective of lowering the concentration of sales, mitigating excessive reliance upon a single major product of a particular program and minimizing the impact of the loss of a single significant customer. Given the nature of our business, we believe our existing sales order backlog is fairly diversified in terms of customers and the category of products on order.

Management, along with the Board of Directors, continues to evaluate the need and use of the Company’s working capital. Capital expenditures, primarily for machinery and equipment and facility upgrades are not expected to exceed $300,000 for fiscal year 2024. A majority of these expenditures will be made to stay competitive in the marketplace and to meet the needs of current contracts. In addition, the Company is expected to spend an amount, not to exceed $7.1 million, towards a facility and capital equipment upgrade under an award issued to us by the United States Navy.  Incurred spending is reimbursable through a milestone plan. The Company is expected to have an initial cash outlay to satisfy income tax obligations arising from the value of the award. Expectations are that the working capital will be required to fund orders, general operations of the business and dividend payments when applicable. Management along with the Legal Affairs, Strategic Planning, and M&A Committee of the Board of Directors will examine opportunities involving acquisitions or other strategic options, including buying certain products or product lines, provided that such opportunities demonstrate synergies with the Company’s existing product base and accretion to earnings.

Results of Operations

Net sales for the years ended June 30, 2023 and 2022 were $35,592,323 and $32,104,774, respectively, an approximate 10.9% increase. In general, sales fluctuations within product categories will occur during a comparable fiscal period as the direct result of product mix, influenced by the duration of specific programs and the contractual terms of firm orders placed for product and services under those programs including contract value, scope of work and duration. Deliverables within firm contracts are often subject to delivery schedules which also contributes to sales fluctuations between comparable periods. The increase in net sales in fiscal year 2023 is primarily due to an increase in shipments on contracts related to a family of power distribution transformers for a single customer when compared to sales recognized in the prior year. Sales in the current year increased on multiple new and repeat contracts which had no or significantly fewer comparable sales in the same period last year, primarily related to build to print contracts and, to a lesser extent, magnetic and power supply deliverables. In addition, sales increased in the current year from a large production contract for a power supply previously designed by the Company which had no comparable sales in the prior period and from greater sales on a large engineering design and production contract which had significantly fewer sales in the prior year. These increases were offset, in part, by decreases in sales, between the comparable periods, due to contract completion, timing of contractual delivery schedules and certain programs impeded by longer material lead times.

Gross profits for the twelve months ended June 30, 2023 and 2022 were $8,050,538 and $5,472,158, respectively. Gross profit as a percentage of sales was 22.6% and 17.0%, for the same periods, respectively. The primary factors in determining the change in gross profit and net income are overall sales levels and product mix. The gross profits on mature products and build to print contracts are typically higher as compared to products which are still in the engineering development stage or in early stages of production. In the case of the latter, the Company can incur what it refers to as “loss contracts,” primarily on engineering design contracts in which the Company invests with the objective of developing future product sales. In any given accounting period, the mix of product shipments between higher margin programs and less mature programs, and expenditures associated with loss contracts, has a significant impact on gross profit and net income.

The improvement in gross profit for the twelve months ended June 30, 2023 when compared to the same period last year resulted from an increase in sales and a higher overall gross profit percentage comprising those shipments which was influenced by product mix. In the current period, gross profit was favorably impacted from higher sales and improved margins on a specific magnetics contract and certain build to print contracts, resulting from manufacturing improvements. The current period gross profit was negatively impacted by significant costs incurred on a certain fixed-priced engineering design contract for a power supply due to the ongoing unforeseen complexity of the design and the identification of additional costs due to the unavailability of mil-spec rated parts in the marketplace resulting from part obsolescence or exceptionally long lead times. The prior year gross profit was negatively impacted by certain programs which had higher sales in the prior year and contributed less to gross profit as the result of cost overruns when compared to the same period this year.  These cost overruns included labor from both production and engineering efforts made and the impact of inflationary pricing on materials for certain fixed-price contracts.  In addition, to a lesser extent, specific to the prior year, gross profit was negatively impacted by the expensing of remaining development costs formerly capitalized in inventory on a specific engineering design program in which our customer had delayed unit qualification testing and for which production units were not expected to be manufactured in the near term.

Selling, general and administrative expenses were $3,750,524 for the fiscal year ended June 30, 2023; a decrease of $192,467 compared to the fiscal year ended June 30, 2022. Lower costs were incurred for the twelve months ended June 30, 2023, comparably, as the prior year spending included specific non-recurring costs attributed to a change in senior management. In addition, fewer costs were incurred in the current period when compared to the prior period resulting from a decrease in board of directors fees due to a reduction of two non-employee directors and lower professional recruiting costs incurred. The decreases in the current period were offset, in part, by increases in conference and training expenditures incurred.

Other income for the fiscal year ended June 30, 2023 and 2022 was $406,453 and $63,914, respectively. The increase is primarily due to the increase in interest income resulting from an increase in investment securities and an increase in fixed interest rates. Interest income is a function of the level of investments and investment strategies that generally tend to be conservative.

The Company’s effective tax rate was approximately 21.9% in the fiscal year 2023 and approximately 20.6% in fiscal year 2022. The effective tax rate in fiscal 2023 is greater than the statutory tax rate mainly due to the permanent difference for incentive stock option expense recorded for book purposes which is not deductible for tax purposes. In the current year, there was no benefit received from ESOP dividends paid on allocated shares due to the suspension of the company dividend in place through February 2023. The effective tax rate in fiscal 2022 was less than the statutory tax rate mainly from the benefit derived from the ESOP dividends paid on allocated shares prior to the dividend suspension. The effective tax rate in the twelve month period ended June 30, 2023 was higher than the prior year as the direct result of a higher income before taxes in the current fiscal year offset, in part, by a decreased benefit derived from ESOP dividends paid on allocated shares.

The Company generated net income for fiscal year 2023 of $3,677,131 or $1.50 and $1.49 per share, basic and diluted, compared to net income of $1,265,127 or $0.52 per share, basic and diluted, for fiscal year 2022. The increase in net income in the twelve months ended June 30, 2023 compared to the same period in 2022 is primarily attributable to higher sales, a higher gross profit margin percentage, an increase in other income, and a decrease in selling, general, and administrative expenses, offset in part, by an increase in tax expense, all discussed above.

Liquidity and Capital Resources

The Company's working capital is an appropriate indicator of the liquidity of its business, and during the past two fiscal years, the Company, when possible, has funded all of its operations with cash flows resulting from operating activities and when necessary from its existing cash and investments. The Company did not borrow any funds during the last two fiscal years. Management has available a $3,000,000 line of credit to help fund further growth or working capital needs, if necessary, but does not anticipate the need for any borrowed funds in the foreseeable future. Contingent liabilities on outstanding standby letters of credit agreements aggregated to zero at June 30, 2023 and 2022. The existing line of credit was extended and expires February 28, 2024.

The Company's working capital as of June 30, 2023 and 2022 was approximately $33.2 million and $29.5 million, respectively. The Company may at times be required to repurchase shares at the ESOP participants’ request at the fair market value. During the twelve months ended June 30, 2023 and 2022, the Company did not repurchase any shares held by the ESOP. Under existing authorizations from the Company's Board of Directors, as of June 30, 2023, management is authorized to purchase an additional $783,460 of Company stock.

The table below presents the summary of cash flow information for the fiscal years indicated:

Net cash provided by operating activities fluctuates between periods primarily as a result of differences in sales and net income, provision for income taxes, the timing of the collection of accounts receivable, purchase of inventory, and payment of accounts payable. The increase in cash provided by operating activities compared to the prior year primarily relates to the increase in net income and an increase in cash collected from customer advances, offset, in part, by an increase in prepaid expenses and other current assets, an increase in inventories, and a decrease in other accrued expenses. Net cash used in investing activities increased in the twelve months ended June 30, 2023 as compared to the same period in 2022 primarily due to an increase in investment securities. Cash used in financing activities for the twelve months ended June 30, 2023 relates to dividend payments on common stock.

The Company currently believes that the cash flow generated from operations and when necessary, from cash and cash equivalents, will be sufficient to meet its long-term funding requirements for the foreseeable future.

During the fiscal years ended June 30, 2023 and 2022, the Company expended $512,016 and $303,561, respectively, for plant improvements and new equipment. The Company has budgeted approximately $300,000 for new equipment and plant improvements in fiscal year 2024. Management anticipates that the funds required will be available from current operations. A majority of these expenditures will be made to stay competitive in the marketplace and to meet the needs of current contracts. In addition, the Company is expected to spend an amount, not to exceed $7.1 million, towards a facility and capital equipment upgrade under an award issued to us by the United States Navy. Incurred spending is reimbursable through a milestone plan.

Management believes that the Company's reserve for bad debts of $3,000 is adequate given the customers with whom the Company does business. Historically, bad debt expense has been minimal.

Report of Independent Registered Public Accounting Firm (PCAOB ID 317)

Financial Statements

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Stockholders and Board of Directors of

Espey Mfg. & Electronics Corp.

Opinion on the Financial Statements

We have audited the accompanying balance sheets of Espey Mfg. & Electronics Corp. (the Company) as of June 30, 2023 and 2022, the related statements of comprehensive income, changes in stockholders’ equity and cash flows for the years then ended, and the related notes to the financial statements (collectively, the financial statements). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of June 30, 2023 and 2022, and the results of its operations and its cash flows for the years then ended, in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matters

The critical audit matters communicated below are matters arising from the current period audit of the financial statements that were communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matters below, providing separate opinions on the critical audit matters or on the accounts or disclosures to which they relate.

Valuation of Inventory Costs Related to Contracts in Process and Work in Process

As discussed in Notes 2 and 5 to the financial statements, inventory relating to contracts in process and work in process is valued at cost, including factory overhead incurred to date. Contract costs include material, subcontract costs, labor, and an allocation of overhead costs. The costs attributed to units delivered under contracts are based on the estimated average cost of all units expected to be produced. Certain contracts are expected to extend beyond twelve months.

The estimation of total cost at completion of a contract is subject to variables involving contract costs and estimates as to the length of time to complete the contract. Given the significance of the estimation processes and judgments described above, it is possible that materially different amounts of expected sales and contract costs could be recorded if different assumptions were used, based on changes in circumstances, in the estimation process. When a change in expected sales value or estimated cost is determined, changes are reflected in current period earnings. Due to the magnitude of the inventory, and the subjectivity involved in estimating the total cost at completion we identified the evaluation of the estimate to complete as a critical audit matter, which required a high degree of auditor judgment.

Addressing the matter involved performing subjective procedures and evaluating audit evidence in connection with forming our overall opinion on the financial statements. The primary procedures performed included the following:

/s/ Freed Maxick CPAs, P.C.

We have served as the Company's auditor since 2014.

Buffalo, New York

September 21, 2023

Espey Mfg. & Electronics Corp.

Balance Sheets

June 30, 2023 and 2022

The accompanying notes are an integral part of the financial statements.

Espey Mfg. & Electronics Corp.

Statements of Comprehensive Income

Years Ended June 30, 2023 and 2022

The accompanying notes are an integral part of the financial statements.

Espey Mfg. & Electronics Corp.

Statements of Changes in Stockholders' Equity

Years Ended June 30, 2023 and 2022

The accompanying notes are an integral part of the financial statements.

Espey Mfg. & Electronics Corp.

Statements of Changes in Stockholders' Equity

Years Ended June 30, 2023 and 2022

The accompanying notes are an integral part of the financial statements.

Espey Mfg. & Electronics Corp.

Statements of Cash Flows

Years Ended June 30, 2023 and 2022

The accompanying notes are an integral part of the financial statements.

Espey Mfg. & Electronics Corp.

Notes to Financial Statements

None

Evaluation of Controls and Procedures

(a) The Company's management, with the participation of the Company's chief executive officer and chief financial officer, carried out an evaluation of the effectiveness of our disclosure controls and procedures (as defined in Rule 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934) as of the end of the period covered by this Annual Report on Form 10-K. Based on such evaluation, our chief executive officer and chief financial officer have concluded that our disclosure controls and procedures were effective as of the end of the period covered by this report.

(b) There have been no changes in our internal controls over financial reporting during the period covered by this report that have materially affected, or are reasonably likely to materially affect, our internal controls over financial reporting.

Management’s Report on Internal Control over Financial Reporting

Management of our Company is responsible for establishing and maintaining adequate internal control over financial reporting, as that term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f). Our internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Under the supervision and with the participation of our management, including the principal executive officer and principal financial officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting using the criteria set forth in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission in 2013. Based on our evaluation using the criteria set forth in Internal Control-Integrated Framework, management has concluded that our internal control over financial reporting was effective as of June 30, 2023.

This annual report does not include an attestation report of our registered public accounting firm regarding internal control over financial reporting. Our report was not subject to attestation by our registered public accounting firm pursuant to rules of the SEC that permit us to provide only management’s report in this annual report.

None

PART III

The information called for by "Item 10. Directors, Executive Officers, and Corporate Governance", "Item 11. Executive Compensation", "Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters", "Item 13. Certain Relationships and Related Transactions, and Director Independence" and "Item 14. Principal Accountant Fees and Services", is hereby incorporated by reference to the Company's Proxy Statement for its Annual Meeting of Shareholders, (scheduled to be held on December 1, 2023) to be filed with the SEC pursuant to Regulation 14A under the Securities Exchange Act of 1934, as amended.

PART IV

Item 15. Exhibits, Financial Statement Schedules, Signatures

S I G N A T U R E S

Pursuant to the requirements of Section 13 and 15 (d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.